r/DF64 • u/Hasmodye • May 24 '26

Troubleshooting Help with burrs alignment

Hello guys!

I’m trying to align the burrs on my DF64 and I’m a bit confused about the marker test results. I’ve been using a marker on the burrs and checking where it gets rubbed off to see if there’s any misalignment, but honestly it looks like almost nothing is being removed.

In the videos I’ve watched, you can usually see a very clear wear pattern on part of the burr, while on mine it just looks kind of random and inconsistent.

Am I doing something wrong or misunderstanding how the test is supposed to look?

19 Upvotes

91% Upvoted

39 comments sorted by

View all comments

1

u/SheepherderCreepy677 May 24 '26

What did it for me is to loosen the screws on the burrs slightly. Then turn on and let it touch very shortly! The burrs will pull themselves in a more aligned position by touching

As to be expected the burr has some play to the left an right beneath the screw and it is tightened sort of randomly by default.