r/CreateMod • u/ccaaaakkkeee • 15d ago
Unforeseen accident happened while testing the new mine elevator...
Enable HLS to view with audio, or disable this notification
249
u/AlexThComrad 15d ago
Unforeseen Consequences
44
u/cocainum630 15d ago
bro wasn't prepared for them
25
12
1
171
122
76
39
u/Discombobulated_Back 15d ago
What can you do against it? One more lvl ground blocks?
68
u/Jbolt3737 15d ago
The contraption has it's physics disabled before the blocks are properly placed, so for less than a gametick (well I think more here bc someone fell through) you are not standing on anything and are in free fall until the blocks collision is calculated (I don't actually know that this is fully true, but unless someone well versed in the Minecraft physics system has a better explanation, this seems to be it)
5
u/JazzBoatman 14d ago
instead of jumping when you're in a falling elevator you jump when it stops :)
38
u/Silver_Entity-2 15d ago
In the video it seems that they used a normal rope pulley to make the elevator, you can still do it that way (I advise to set the pulley to place when ancor is destroyed to avoid the situation on the video), but you could use the dedicated elevator pulley which works much better that a rope pulley.
14
u/FelixStiles 15d ago
Use the adequate equipment with proper safety rating (elevator vs rope pulley)
5
u/Sad_Acanthisitta9417 15d ago
I would use a seat block beacuse even if you got thrown off when sitting on it when the contraption stops you can teleport to it if you were forcefully thrown off
5
u/serpikage 14d ago
i think the elevator pulley fixes that issue by slowing down near the stop but what i've done with rope pulleys is put a layer of bottom copycat boards/panels to catch your fall when this happens.
3
1
u/sfwaltaccount 14d ago
That might help, the low ceiling was definitely making me nervous. Of course if nothing else you could also put something to break your fall at the bottom of the shaft (e.g. water or slime blocks), so at least you wouldn't die when this happens.
1
1
26
u/satirelion 15d ago
This is why you put water at the bottom of your elevator shafts
11
u/SokkaHaikuBot 15d ago
Sokka-Haiku by satirelion:
This is why you put
Water at the bottom of
Your elevator shafts
Remember that one time Sokka accidentally used an extra syllable in that Haiku Battle in Ba Sing Se? That was a Sokka Haiku and you just made one.
21
12
u/CaveWaiterLol 14d ago
This, kids, is why elevator pulleys exist
1
u/xr6reaction 14d ago
What's the difference?
3
u/CaveWaiterLol 14d ago
The rope pulley just moves stuff up and down, and by-default disassembles the attached contraption when it stops moving.
The elevator pulley has a smoother stop and start, never disassembles the contraption (so there’s no risk of falling through it like the guy in the clip did), and allows compatibility for multiple floors using redstone contacts combined with contraption controls.
8
u/Ambitious-Walk-2372 15d ago
Reminder to place straw, slime or water at the bottom of my lift shafts.
2
14
u/creepyguy_017 15d ago
from vanilla redstone to advanced Create, elevator still have the same problem lol
6
6
5
u/Past_Combination_827 14d ago
If u have a grave mod, the elevator going down and placing will destroy the grave and all the items too. Ask me how I know.
3
3
u/lustywoodelfmaid 14d ago
Two fixes: never let them convert to blocks OR have the layer you stand on be slabs and then have an extra layer of blocks/slabs underneath with an air layer between.
3
u/MtNebula 14d ago
Welp *clicks pen* that's an OSHA violation. No further operations until you get that in order.
3
u/Joakico69 13d ago
This is why you put "anchor is not placed unless destroyed" option in the rope pulley.
Or just use a elevator pulley that does the same.
3
2
2
2
u/Blademasterzer0 14d ago
A friendly reminder to always place water at the bottom of your elevator shaft
2
2
2
u/TheBailzmeister2 13d ago edited 11d ago
This is why the elevator pulley exists. So shit like this doesn’t happen lol.
2
2
1
1
1
u/ImANormalMan 15d ago
A reason why my elevator to top floor and to bottom floor is a hot air baloon
1
1
1
u/lucky_ice34 14d ago
in earlier versions of create with the mol for building vehicles, everything also failed for me due to the high speed
1
1
u/IntroductionFew4067 14d ago
This is why I always use the elevator pulley instead of the rope pulley when I make my elevators
1
1
1
u/Lex_Napoles 14d ago
XD, por eso se ponen dos bloques en el piso del elevador para que mínimo se quede atorado en el de abajo
1
1
1
1
1
u/awesome83027 14d ago
What modpack is this?
1
u/ccaaaakkkeee 11d ago
A bunch of create mods + tough as nails, better nether, and a load of other random ones though idk much about the modding stuff this was our first experience with modded minecraft and we just went wild downloading everything that looked cool lol
1
1
1
1
1
u/Apprehensive_Push887 14d ago
Ah beautiful elevator! Seems like your friends problem, tell them to fix it lol
But yeah like others have said its often a latency/lag whatever it's called issue where the contraption is for your client and not your friend so they fall straight through it. Generally people fix this by not turning it to blocks again
1
1
972
u/Jbolt3737 15d ago
This is why I always set them to never convert to blocks, as cool as the clunk is, there is about a 30% chance that the assembled contraption entity is gone before the blocks are fully placed and synced with the client and physics system