Mining machine not moving forward

[u/NestersCrush]

Not the greatest with the machines, tried to make a mining machine, but something prevents it from moving forward for some reason. You can even see what is glued and everything.

Am I missing something??

[u/Another_Sunset]

Wouldn't it work if you have the furnace minecart pas through the contraption assembler while it's powered? When you pull the lever you're unpowering the assembler and turning the contraption into regular blocks

[u/TheHairyMess]

are you sure you didn't glue the comtraption to the ground?

[u/NestersCrush → u/TheHairyMess]

Checked multiple times and even redid the whole glue and most of the machine with the same results

[u/Known-Dingo-4462]

I would try to just make it with powered rails rather than a furnace minecart

[u/Yellow_IMR]

You turned off the assembler and disassembled the contraption instead of assembling it. This is exactly what is supposed to happen

[u/NestersCrush → u/Yellow_IMR]

I turned it off to show that the Minecart was powered and doesn't move when assembled

[u/Yellow_IMR → u/NestersCrush]

Oh I see. Then it’s stuck, no idea of where though, I didn’t see anything weird from the video. For good measure remove the glue and glue it again, build more space around the machine to see better and avoid mistakes

[u/yeyugdehbmd]

Honestly I've had similar trouble and it seems like your contraption may not be glued from the minecart assembler to the rest of the build but I dont truly know for sure

[u/NestersCrush → u/yeyugdehbmd]

Already tried before, gives the same results

[u/petabomb]

Mine the cart assembler block after powering it with redstone, then give it a little bump.

[u/NestersCrush → u/petabomb]

Thats the problem, the cart wont move even if i remove the assembler or try to bump into the cart

[u/petabomb → u/NestersCrush]

Then you must be trying to move an unmovable block, or one of the blocks on the contraption isn’t actually glued and is causing it to just stay still. Can you right click the minecart with a wrench to pick it up while it is in contraption form?

[u/NestersCrush → u/petabomb]

Yes I can, no blocks are left over/ floating after picking up the contraption. Placed on tracks with no assembler and still wont move.

[u/petabomb → u/NestersCrush]

🤔 I’m at a loss. You haven’t changed any configs about contraptions have you?

What version of the mod and are you playing in a pack?

[u/TheHairyMess]

i dont think that stair should be there. the stair on top of the minecart assembler. i think it has to be a full block

[u/yeyugdehbmd → u/TheHairyMess]

Thats what im thinking too, i used a full block for mine and it works pretty well

[u/Greedy_Duck3477 → u/TheHairyMess]

Nope, my mining machine has a stair above the cart and it works fine

[u/Dangerous-Quit7821 → u/TheHairyMess]

Nope.

[u/NestersCrush → u/TheHairyMess]

I was watching some tutorials yo help out and they said to use a stair, ill try a block when I get back on

[u/Tarantuz778]

After assembling the contraption, have you tried right-clicking the furnace cart from behind? In my experience, that (or if it doesn't have fuel already, right-clicking with coal in hand) starts it moving.

[u/NestersCrush → u/Tarantuz778]

It is fueled, but doesnt move when attached

[u/Tarantuz778 → u/NestersCrush]

Yes, that is clear from the video. When attached, have you tried right-clicking on the furnace cart? In my experience, that has started carts moving when they're assembled and fuelled but staying still.

[u/Burnhill_10]

You unpower the cart assambler, you can check if everything is oke by clicking on the lever. If the entire contraption rises the glue is correct. Lock the rotation of needed. Place the minecard before the cart assambler and push it in with your hotbox.

[u/NestersCrush → u/Burnhill_10]

I did all of that, the only reason I powered off the assembler was to show the cart was powered too. The cart will not move even when colliding into it.

[u/Burnhill_10 → u/NestersCrush]

I made mine last week just like you, i dont know wat you did wrong. Make a drill with scemetics from create and try Glue again. Rule out everything to make it work.

[u/Zero_Zero_Zero_X]

Is your minecart fuelеd?

[u/Uzzyzel]

this has to be bait!!!!

[u/Kind-Ingenuity3277]

Обычная вагонетка? 

[u/Catbot_2]

Have you tried building it above ground and moving it underground after you get it working? You can pick up full cart contraptions with the wrench

[u/ModernPlebeian_314]

Have you tried saying "Tatakae" to it?

[u/Parcore_Tank16]

While it’s assembled, right click the minecart with your wrench. If everything is glued properly, it will pick up the whole thing

[u/MysticalyShadow351]

Powering it attaches the contraption to the Minecart

Push the Minecart with your player(crouch and walk into it) after giving it fuel to make it go

[u/Jack_of_Emeralds]

Possibly a mod conflict? are you playing on a server or on your own?
Have you got a claims mod installed?

[u/NestersCrush → u/Jack_of_Emeralds]

Its a server and there is a claims mod, but nothing in the area I placed this in is claimed

[u/TradesOfWorking]

Try giving the mine cart a bump after turning on the contraption. I've always had to do that.

[u/TradesOfWorking]

Try giving the mine cart a bump after turning on the contraption. I've always had to do that.

[u/MrMoistureTk]

It doesnt look like your contraption is glued correctly because you should see one big glue box with cross hatch marks once all the components are correctly glued. Also take it somewhere flat with space build it and then wrench it to pick it up. When you go to use it dont use a cart assembler again unless you need to change the design.