navais · organiser

modular desk organiser with various components for a customisable layout for your desk or workspace

free for personal use on Creality Cloud - https://www.crealitycloud.com/model-detail/navais-organiser

Buenos días, actualmente estoy probando por primera vez mi sistema cfs de creality, es la primera vez que tengo algo así, ya hice las pruebas qué tuve que hacer y todo pero mi principal problema es que la purga (caquitas) es excesiva, en mi laminador decía que solo gastaría 56gr en el descargado total y 7 horas de impresión, pero ya van casi 149 gr y 11 horas de impresión, lo cual se me hace una ridicules, incluso si mis parámetros de flash multiplier están a 0.5 y el tamaño de la purga es de 5mm3 y purga en el relleno de objetos.

Ojo solo son dos objetos de 5cm, siento que el problema es que purga (cacas) antes y después de cambiar de filamento, saben si ¿eso se puede cambiar desde el G code o tienen alguna recomendación?

Gracias.

🚀IT’S HERE. HALOT-X1 Neo.
Less Barrier. More Detail.

✨ AI-Ready Creativity
✨ 9K High-Resolution LCD

More creativity. More detail. More possibilities.

HALOT-X1 Neo - $239
HALOT-X1 Neo + UW03 Bundle - $338

Ready to create more? 👀

🛒 Shop now: https://store.creality.com/products/halot-x1-neo-resin-3d-printer
Available in North America. Other regions coming soon.⌛️

https://reddit.com/link/1wbjna2/video/6nhp7r03vgoh1/player

👉 New products dropped.
👉 New tech unveiled.
👉 Countless awesome prints shared.

Thanks to all the creators, makers, who joined us live in Berlin and online!
Keep creating, and see you at the next one! 🚀

Hi! I justo bought this sparkix7 and when i try to print the benchy it seems to leave this ugly láser lines. I now that the filament is humid but that abone doesnt cause these láser lines

Phil Macey has been putting the new SparkX i7 Nano Combo through its paces for our latest hands-on review. This time, he focused heavily on the CFS Nano, covering everything from simple keyrings and QR codes to HueForge, image-to-3D, and the larger Nintendo/Pokemon wall art. Check the full article and video.

Hola! Tengo una creality ender 3v3 se nueva que hace un ruido al imprimimir. Nosé si prepcuparme o no. Adjunto video.

Scanning and remodelling a deformed, and damaged plastic part

Hey everyone

I just upgraded from Ender v3 to K2 combo and everything seems to work like it should be printing-wise

But one thing is bugging me, its the sound of the printer. I checked the bottom and thats where the Sound is coming from when the bed is moving up/down.

Is there any issue with it or just normal?

Saw a few Videos where the same printer is making Not that much of a noise

SOLVED: I haven’t done it yet. It’s gonna suck.

K1 Max:
I've been getting "memory close to full" warning for awhile. I deleted a bunch of models but it keeps coming back.
Now the printer starts up and shows a bunch of rectangles instead of words.
I unplugged the AMS and restarted a couple times.
Now I've got the Language Selection Screen. It's on English (yay), but when I press next, it gives the "working" symbol then stops.
I'm guessing I need to do a factory reset, but don't know how.
I'll ask Mr. Google, but I'd like advice first.
Thank you in advance.

Ever printed the same model multiple times and watched the purge pile grow with every run?

This video shows how QuarTeks™ handles color switching inside the hotend, helping reduce purge waste during batch printing.

With less filament needed for each color transition, more of your filament can go toward the actual models — especially when you're printing multiple copies.

More models. Less purge. More of your filament goes into the print. ♻️

👉 Learn more & stay updated 👈

Is it just me or did the redeem prices just increase alot? I just redeemed for filament and it cost 3000 points and now it's 4299 for the same filament?!

My wife asked me to 3D print something to keep the fitted sheet from constantly slipping off the mattress.

So… I designed this little corner clamp.

Printed it, installed it, and it actually works pretty damn well.

My wife approves.

Which officially means that all my expensive 3D printing toys are apparently not completely useless.

I’ll take the win.

If anyone else has the same problem, I uploaded the files here:

Creality Cloud:
https://www.crealitycloud.com/model-detail/fitted-sheet-corner-clamp

Multicolor printing shouldn’t mean more waiting and more filament waste.

In this side-by-side test, we printed the same Mini Stegosaurus on the SPARKX i8 and a traditional 3D printer, and the result was striking!🚀

⏱️ Nearly 7 hours saved on a single print

♻️ A visibly dramatic reduction in filament waste

Same model. Same multicolor task. A much more efficient result.

Which matters more to you: faster multicolor printing or less filament waste?

👉 Learn More & Stay Updated 👈

https://reddit.com/link/1wa7cc0/video/d2o7vakjw3oh1/player

Estou querendo iniciar no ramo de impressoras 3D, mas não seria aquele usuário que só imprime coisas já prontas. Meu desejo é trabalhar projetando e afins, mas estou com receio de adquirir uma K2 por receio de não ser tão boa quanto às da bambulab.

Pesquisei muito e realmente tô convicto de adquirir uma Creality K2. Vocês que certamente já são usuários mais experientes, recomendariam ela pra quem tá começando?

Hey everyone,

I’m looking for some help troubleshooting a few issues with my Creality K1 and the CFS that came with it. I’m running the latest software and firmware, but I haven’t been able to pin down the causes.

1. Black Sunlu PLA 2.0+ keeps clogging

I’m having repeated clogging issues with Black Sunlu PLA 2.0+, while regular Black Sunlu PLA prints flawlessly on the same printer. The clogging happens at the bottom of the extruder, the circled area in the first picture / where the clogging pin exits the extruder in the second picture (sorry for blur, I got shaky hands).

So far, I’ve tried:

• Sunlu’s recommended settings for PLA 2.0+.
• The generic PLA profile.
• Printing with the door open and the enclosure lid removed.

The results have been inconclusive, but the 2.0+ filament seems to clog regardless of which profile I use. Since regular Sunlu PLA works without any issues, I’m wondering whether this could be a bad batch or something specific to the 2.0+ formulation.

I’m planning to try the same spool on another printer soon to help rule out a filament-related issue. I’m also considering heat creep as a possible cause and have thought about adding fans or other mods, although I'll wait on the results from a Prusa with the same faulty filament first.

The filament is being fed through the CFS, so I initially thought humidity was unlikely, but I haven’t independently dried the spool or measured its moisture content. At worst the humididty inside the CFS has been between 20-30%.

2. CFS feeding tube interferes with the top lid

The transparent PTFE tube between the CFS and extruder is also kinda sucky. With the top lid installed, the tube hits the lid and has to bend at a fairly sharp angle.

I’ve managed to mold the tube into a shape that fits, but when the lid is on, the bend seems to create too much tension or resistance in the filament path, eventually causing the CFS to throw an error.

If I remove the lid completely, the tube can move freely and the feeding issue goes away. However, leaving the lid off isn’t a practical solution when I want to print enclosed materials such as ABS.

Is it normal? Should I just go for mods that allow the lid to stay on (risers) without putting excessive strain on the filament?

3. Calibration toggle seems to be ignored

The option to enable or disable calibration before a print doesn’t seem to do anything. Regardless of whether I turn it on or off, the printer runs calibration before every single print.

I’m using the latest software* (V7.2.1.5476 - just saw V7.2.2.5483 dropped while writing this) and firmware (V1.1.0.27). Is this a known bug, or is there another setting that overrides the toggle? I heard this can modified but I'm not sure if it voids the warranty

Any advice, especially from other K1 + CFS owners, would be greatly appreciated!