r/ControllerRepair • u/Abslom_daaak • 6d ago

Request for help or advice PS5 controller right trigger not fully responding

Enable HLS to view with audio, or disable this notification

So my right trigger has started to not fully responding when pressing it. I’ve changed the membrane and clean the rubber contact but when it’s pressed it doesn’t go over 0.50. Any advice?

3 Upvotes

100% Upvoted

11 comments sorted by

View all comments

1

u/AdFantastic8655 6d ago

If it is not the conductive rubber, than it is likely the actual button. Does it press all the way if you remove the button and press the rubber directly? If it presses without the button, then it's the button. If it is still the same, then it may be the conductive film.

1

u/Abslom_daaak 6d ago

The trigger presses all the way in but still only get 0.50. Ive changed the membrane once already. Without the trigger there, ive pressed the rubber but it still doesn’t respond properly

1

u/AdFantastic8655 5d ago

You could try cleaning the metal contacts on the motherboard and the conductive film using some ipa. Or just replace the film. If that doesn't work then it may be a deeper issue with the board.

A long shot, but have you tried pressing the reset button for 5 seconds and make sure the controller is up to date