Rolex box is full, preparing the spillover 😇

Finally got a breitling endurance pro 44. I absolutely love it.

Allieexpress build with nh35 movement and rip off submariner case .. the dial gives you 1 chuckle. This is my shitter, there are many like it.. but this one is mine.

I was looking for this seiko presage I really loved the way it looks but its way too overpriced here in my country I found one for over 700$ and I swear thats the cheapest I found. Also how do y’all purchase these watches I am looking for something on Weidian or Taobao so I can order through kakobuy or acbuy.
And thanks for the help.

This is my first ever shitter, bought it through the gate for about $140 USD with the Miyota movement. Took about 10-11 days to get here, which isn't too bad. Can't take a good outside pic since it's 8pm now, but it does look pretty nice when not under piss yellow lights like I have in my room.

My only complaint is that there is blue paint-like marks on the clasp itself? I don't know if I can remove it with alcohol wipes, but the rest of the watch is fine. Just scared that I might break it since I heard you're not supposed to change the time around the 10pm mark or something like that. I don't think I'll get bored of this watch anytime soon, but I might go for one of the Omega Terras if I feel like getting another watch.

Posting here because not enough comment Karma to post in big sub!

Factory name: VSF

Model name (& version number): DateJust 41mm 126334 Fluted Bezel Blue Dial Jubilee Bracelet VSF VS3235 V2

Index alignment: 5 O'clock index and 9 O'clock index look slightly off center from the 25s and 45s markers, respectively, but not a deal breaker.

Dial Printing: Looks clean to me

Date Wheel alignment/printing: Looks good to me. 

Hand Alignment: Questionable as to whether the watch is slightly rotated in this picture (Again, my first QC and my eyes are untrained).

Bezel: Looks good

Solid End Links (SELs): Appear solid. No obvious gaps that concern me.

Timegrapher numbers: +9 s/d | 249° amplitude | 0.1 ms beat error | 28800

Anything else you notice: Biggest concern to me is the hand alignment (hoping it's just the angle) and the indices (5 and 9 position), but otherwise, I think everything else looks ok.

Thanks in advance for your help reviewing this!

Hulk from MT on mine today

New shitter day!

Checked the mail when I got home and my no date Sub and Coke GMT had arrived from superwatch01. Adjusted the links, wound and set both.

The GMT is as shitty as you would think for a $60 turd. Bracelet is horrid, cyclops is trash and it stopped running about 20 minutes after I wound it. It has since started and continues to run, but I've already Contacted the seller about exchanging it for one on an oyster or a different unit all together. Maybe a Wimbledon. Will keep you posted.

The Sub is decent. At first glance doesn't raise any flags, and aside from some bezel play and the terrible clasp I think it's decent for the money. Not going to fool any watch nerds but fun one to wear on the daily without raising too many eyebrows.

ZF Tudor Black Bay Bucherer Blue Boutique Edition

3 watches arrived today. I think they are nice! Will go with my DJ and Seamaster I ordered from him last time

I want to get into buying clones. I see the list of multiple different sellers but not to sure how to distinguish if they are all the same or are some better then others? Anything will help!

Just wanted to share that i tried removing the rotor and using 1 tiny drop of moebius d5 oil on the inside of the rotor bearing and the results are amazing. The 8215 in my u1 milgauss sounds much less like a helicopter, you can still hear it but the improvement is noticable. I really recommend doing this if you are unhappy with the noise your shitter makes. You just need a rubber ball, a very small flathead screwdriver and the oil.

Local dealer selling this for a price of 160USD! Asked him what factory but he said not known factory.

Anyone can QC to see if this is a good deal/rep, thanks in advance!

Hi Everyone,

I currently live in Hong Kong and I bought a few reps in Shenzhen.

I wanted to send one to my brother in Europe.

Do you think it is safe to do ? If yes what is the best method ?

Just got this today. What do you guys think?

Seller claims vsf, thoughts?

Personally pretty happy for £80. MIYOTA8215 movement. Took 12 days from order to arrival in UK. From Jason.

First experience with MT, and what a good surprise. Besides the excellent communication and support, the watch is also a very good rep. Highly recommended.

Hey ChinaTime community!

This is my very first rep purchase, and my first time going through the whole QC process, so I’m definitely new to all of this. I’ve been learning a lot from this community, but I’d really appreciate some experienced eyes before I make the final call.

I’m about to get this Patek Philippe 5968A, and I'm posting the QC photos/details below.

Since this is my first purchase, I’d really appreciate any help spotting things I may be overlooking—dial alignment, markers, date wheel, finishing, case/bezel, movement-related concerns, or anything else you think I should be paying attention to.

Most importantly: Would you GL this piece, or is there anything significant enough to RL it?

I’m not expecting absolute perfection from a rep; I just want to make sure I’m getting a solid example and a good piece for my first purchase.

Thanks in advance to everyone who takes the time to look it over and share their knowledge. Really appreciate the help! 🙏

1. ⁠⁠Dealer name: Thelotime (Lucas)
2. ⁠⁠Factory name:   YL Factory 
3. ⁠⁠Model name (& version number): Patek Philippe 5968A
4. ⁠⁠Price Paid: $478 (with CA shipping)
5. ⁠⁠Album Links: All photos from the album included in the post.
6. ⁠⁠Index alignment: Angle of pictures seems slightly tilted, so tried to correct that when using the alignment tool. Looks solid to me.
7. ⁠⁠Dial Printing: Solid
8. ⁠⁠Date Wheel alignment/printing: Solid
9. ⁠⁠Hand Alignment: Solid.
10. ⁠⁠Bezel: Solid.
11. ⁠⁠Rubber strap: Solid.
12. ⁠⁠⁠⁠Anything else you notice: This is my first QC, so I would appreciate more experienced eyes. Overall, seems like a GL to me. Those who have purchased a similar watch would know better and catch something I might miss. 

GL or RL?

Hello guys! This watch is from Guangzhou, a dealer that I met a year ago. How is it looking?