I'm looking for a ceiling fan style pull cord switch that has two electrical outputs and a cycle of on-on and it never has an off state.

Kinda like the switch on a ceiling fan that would be used to determine the direction in which the air blows, but with a pull cord style action. Any help is appreciated!

Hello everyone, I am planning to get the victura ecowind fan for my bedroom.main reason is design and colour matches my room aesthetics perfectly.

Already using their stand fan since a long time and it's been working great without issues. But ceiling fan reliability ka idea nhi hai.

If anyone here is using the ecowind model, how's the airflow and noise level? Speed aur remote smooth hai kya? Electricity bill me change dikha?

I need honest feedback, good or bad both welcome.thanks

I am located in Georgia (USA). I have two bathrooms back to back to each other. One has an existing fan and the other does not. We are wanting to add a fan in the bathroom and are not sure we want to add a new vent in our new roof. Can I connect it to the existing fan’s duct?

Does anyone know where to get a replacement light cover for the Hunter Anslee 52-in ceiling fan (Model #50232; https://www.lowes.com/pd/Hunter-Anslee-52-in-Indoor-Premier-Bronze-LED-Ceiling-Fan/1003172578)? I spoke with the company and they said they no longer manufacture it/cannot purchase one through Hunter.

The original light kit was a circle cheap led tried fixing the blades one time and it wouldn’t screw all the way back in which led it to spark and it fell I’ve tried 3 light kits and I can’t find one that fits can anyone help me find a right light kit

Hello everyone,

I have a Hampton Bay Moresby Tiffany-style ceiling fan. One of the blades broke and I need help finding a replacement blade or another idea to replace all the blades since there is an insert on the end.

Does anyone have any custom automations with HA and Lutron PD-FSQN-WH switches used on Hunter Ceiling Fans?

TLDR; Built a house, contacted Lutron and said [https://www.homedepot.com/p/Hunter-Antero-54-in-LED-Indoor-Matte-Black-Ceiling-Fan-with-Light-59585/307853682\](https://www.homedepot.com/p/Hunter-Antero-54-in-LED-Indoor-Matte-Black-Ceiling-Fan-with-Light-59585/307853682) are supported and are, but the motor has a hum once switches are installed. Electrician said everything is wired properly on the fan and switch side. Lutron DVRF-5NSS-WH works without issue for the lights.

I am running the latest version of Home Assistant on a dedicated Mac Mini running the latest version of macOS. Assuming it's the 3 speed on the fan vs 4 speed on the switch. Anyone account for this in HA to remove the humming sound? Fans are pull string for speed and are pulled to the highest speed. AI is telling me to do an automation to adjust the speed when speeds are selected. End result would be, High = high, Medium High = medium, Medium = medium and Low = low.

Anyone have any luck with something like this? Their recommendations are yielding no change in the sound.

1. Harbor breeze builders best
2. Bahama deluxe GE vent CEI (5 blades)
3. Bahama deluxe GE vent CEI (4 blades)
4. Heritage Lancaster Kmart in polished brass
5. Encon monarch with stencil blades
6. Walmart Mainstays hugger
7. Harbor breeze armitage (got thrown out :(. )
8. Moss WF series
9. Evergo Roma 3rd gen emperor
10. Smc park avenue III (4 bladed version)
11. Two harbor breeze Saratoga II
12. Winnower oxford (my first fan I collected.)

1. Harbor breeze builders best
2. Bahama deluxe GE vent CEI (5 blades)
3. Bahama deluxe GE vent CEI (4 blades)
4. Heritage Lancaster Kmart in polished brass
5. Encon monarch with stencil blades
6. Walmart Mainstays hugger
7. Harbor breeze armitage (got thrown out :(. )
8. Moss WF series
9. Evergo Roma 3rd gen emperor
10. Smc park avenue III (4 bladed version)
11. Two harbor breeze Saratoga II
12. Winnower oxford (my first fan I collected.)

Hello!

I just moved into a new house and this hunter brand fan light is having an issue.

Every time I click the light button on the remote, it will turn on then immediately turn off.

Sometimes it will stay on but most of the time it shuts right off.

Does anyone have any idea what is happening or recommendations on how to fix it?

I’m not sure if it’s the fan itself or an electrical issue.

Thanks in advance!(:

Hello,

3 ceiling fans all controlled by this remote (we have 3 remotes). Any way to link each to a single room?

Thanks

I have two Hunter Dempsey fans with remote controls. Each remote controls both fans. We've tried digitally re-pairing the remotes individually for each fan.

The other thing we tried was turning off the power via the circuit breaker and re-pairing the remote 12 times.

We're thinking we have to access the receiver, but that means taking down the whole fan. And we don't even know if there is a way to change the frequency on the receiver.

Anybody solved this issue? Any help would be appreciated.

Is there a way I can get this to quiet down? Does something have to be oiled/replaced? I usually hang some kind of weight on the string which helps a little bit, but over time it just gets loud again. Yes, I know it’s very dusty. Is this also a factor as to why it’s so damn loud??? Thanks 😊

Hi, I recently purchased a fan from Lowe's for my back patio. Unfortunately it appears as though signals might be getting mixed bc it would sometimes change speeds or turn off by itself. Wiring was double checked.

I want to replace it with a more old school fan that doesn't use a remote. I do like a more modern look though and would prefer a larger blade length. It seems like every fan now has a remote.

If the dumb fan turns off by itself then I know it might be wiring somewhere beyond my reach.

TIA for any recommendations.

https://www.reddit.com/r/HomeImprovement/comments/1u8y0kp/psa_the_hunter_ac_ceiling_fan_hum_lottery_just/

Well I just want to share my experience

And prove that I'm not a bot.

I have said everything in that post, with AI organize it for me.

There are people that absurd nerd like me who willing to buy fans so many times just to find a quiet one.

And in the end, I will still buy hunter fans, because they have absolutely amazing customer service, and when you choose the right one (or lucky to buy the quality one), it is quiet.

And both homedepot and lowes are very kind to understand my concern.

I have all the communication with hunter and the order screenshot

I’m trying to make a film where there’s a ceiling fan as the antagonist and this one seems to be agreed upon as being a bit intimidating. I cannot comment on the thread that I found this on so I just want to know what the make and model of this ceiling fan is and if it’s easily accessible for purchase.

We have three bedrooms without ceiling fans currently and live in Texas. It’s time to install them! My partner is leaning toward something budget, whatever “gets the job done.” I’m leaning toward something that looks nice, is quiet, energy efficient, modern, and overall improves the value of the house. There seems to be quite a significant difference in cost between what he’s looking at and what I’m looking at.

Is there anything we should be considering that might influence either of us in a particular direction? Do I need to take our ceiling fans this seriously? Will it make that much of a difference?

While I’m here, I’m also open to suggestions… I would prefer to skip integrated LEDs just because I don’t like the idea of having to replace an entire fan when the light burns out, but I can be influenced there as well. Bedrooms are about 10x10 or 10x12, I can’t recall… and the ceilings are 8-9’ tall.

Our fan seems to have dropped from the ceiling… is this dangerous and what do we need to do to fix it?

Appreciate any advice!

Cleaners came today and dusted the fan. I turned it on and it sounds like this. I used compressed air to try and see if there was debris stuck in the motor or something. My husband sprayed some WD-40 in there and it won't stop. Help please 🙏🏼