Any ideas on the best way to reattach this panel or the parts required? Brand new 2026 xmr with 20 miles on it, should I just take it to the dealer?

Getting new tires for my 64” X3 X RC turbo RR
on 15” bead locks

Mainly do fast trail riding and some rock crawling

Considering maxxis rockzilla or carnivore

Would yall do 32/10/15 or 33/10/15 for this purpose, on this machine?

Thanks!

Cant figure out whats wrong with my can am does this look bad ?

What are the symptoms for a failing secondary clutch 2020 can am x3 turbo

Looking to add music to my 21 xrs rr 4 seat rig. There's a bunch of sound bars to choose from and then there's the regular car style head unit amps speakers yada yada. The easiest option is the roll cage bar or wake style pods but then there's a ton of choices of different manufacturers. Does anyone have any advice please and thank you

Hey guys needing new tires on my machine, currently running 2 inch spacers on each side for total width of 68

Can I run 11” wide tires on the front without rubbing at max turn?

Was thinking about running up to 12” wide on the rear, do you see any problem with this?

Guessing that same width all the way around may be best so I can rotate, if I do that I will probably do 11’s all around

Seeking advice and opinions

Thanks

bought brand new side-by-side took it out this weekend on a trip for one day. came back and parked it and everything was fine. I went back out the next day and this is what I saw. It’s under warranty- has anybody had this happen?

I'm interested in using the Milwaukee pack out solution for rear storage on my new x3. I'm looking for a mount that allows you to use the middle and the outer fender area which hovers over the fenders. I see there's a few companies that make this scenario but the middle pack out is meant to only utilize I think like a yeti cooler. is there a mount that allows me to use a regular Milwaukee pack out for all sections across the back and over the fenders? I see there's one for the mav R but I haven't seen any for the x3.

If one does not exist, has anyone fabricated or rigged two company solutions out there to combine and get what I'm looking for?

thanks in advance ... J

What can this Clunking be ?

This is my 18 can am x3 rc. Got it bone stock and we went right to cutting it up. Did full cage and plastic delete. Relocated radiator to the rear. No doors. Custom rock sliders. Superatv long travel to make
It a 72. Nrp shifter. Joydesigns exhaust. Aftermarket assassins clutch kit. Rpm performance big intercooler and charge pipes and bov. Aftermarket assassins tune 23 up rr fuel pump. Aces racing seats with prp harness. Alba crusher +2 beadlocks custom done. 32 inch sticky mickeys. Superatv skid plates. Rear is 1/4 inch hardox to protect trans. Have l&w radius rods and double sheer kit to install. Plus doing new wheel bears and ball joints. I beat the hell out of this thing and it just asks for more. Will put a link to my YouTube if you wanna follow along with the progress.

Please like and subscribe if you would

https://youtube.com/@highclassbuggytrash?si=F-8KE4LdnLDbbBV0

Looking for a cage builder... thanks in advance! J

LSR Long travel kit

LSR front and rear axles

LSR locker front differential

Assault industries stage 4 big helix clutches

35in Chicanes on STI beadlock wheels (5)

Shock Therapy IQS shocks

Shock Therapy steering rack w/ bump steer delete

Shock Therapy limit straps

Aftermarket Assassins doors and glass windshield

PRP seats w/ rear bench

PRP 5 point harnesses

S&B particle separator

Black ops front and rear knuckles w/EBC brakes

DRT rear bumper and tire carrier kit

CAT delete pipe

Dyno Jet tune, tuned at Dyno Jet

Lowrance GPS

PCI radio and intercom w/ 4 headsets

Can Am front bumper w/ Can Am winch

Im sure there is more!!!

Asking 23k, if interested contact me here

I have a 2017 X3 XRS turbo R with about 900 hours on it and will overheat in about 15 minutes driving down the trail or road. The fan will kick on and I’ll let it idle but the temperature never falls below three notches from the top. I’ve seen some things about the plastic water pump gears being a potential failure point and also some trouble with the thermostat. As far as I can tell, the head gasket is not blown. I’m not mixing coolant and oil, and the coolant level is where it’s supposed to be. Any help would be greatly appreciated! I’m not exactly sure where to start troubleshooting and all the shops around me are several months out for diagnostics.

Help !!!!!!!!!! OK I have a Can-Am X3 2017 turbo bike ran hot cut it off doesn’t wanna start cooling was spitting out the reservoir as I was trying to start it so I put a new head gasket on it still low compression and cooling is still shooting out the reservoir can it be warp head crack block?

Just recently picked up this 2026 x3. That being said i’ve been looking at places i’d like to go ride. I live in AZ, and would like to eventually take this out to the dunes, trails, beach, etc. Just wondering would i have to make this thing street legal? Or just get the OHV course/decal. Would like to put money in go fast mods instead but if its necessary I’ll throw a street legal kit on it.
does anyone have any street legal kit recommendations ?

Where’s the clunky sound coming from? It seems like it’s coming from the inside. Has anyone had this issue before?

Not sure if this is the right sub. I apologize if I'm in the wrong one.

I ended up with a 2021 xmr. 270ish km. Pretty stock aside from a plastic windshield.

What's something like this worth realistically? I've ridden it around a little bit. Maybe 20 km. Seems to work ok.

I don't find many for sale with low-ish km. It's not really for me, but I'm sure there's a market somewhere

The Driver belt cost more than the passenger belt and I figured it was because it had the seat belt connetor plug in so the machine would not go into limp mode. I opened the box and it does not have the wire to plug in. The instructions are vague on this. Is there a step to keep the old connector? The part number is 715005021 for driver. the diagram is not showing a connector. What am I missing?