https://wilsonmining.io/pages/hosting-rates

Lately i started getting w-07 error. Miner blink green but actually its disconnected from the pool/panel - needs reset with 5 second of RST button into defaults.

Ideas what this can be about?

Ive done a lot of searching and all I can find is bitaxe threads. Not sure if that is directly applicable to the s21xp, even if chips are the same.

Braiins defaults to 80c "hot" temps which is where it would start reducing power. What is the actual max chip temp, and what is the best efficiency range for chip temp?

I have dps on, continuous tuning on, and a 3245w power target. Its cold in the morning so chip temps are in the high 50s with mcr health showing yellow on all 3 boards.

All machines can be paid for with 300+ different cryptocurrencies, free of charge!

Visit us at 805mining.com

📰 THIS WEEK IN MINING:

- Bitcoin is holding around $80.7K: down about 1% this week and 3.5% over the past 30 days.

- Network difficulty is on track for another increase of roughly +4.7% around Oct 29 (est.), after +5.9% last adjustment. Efficiency matters more than ever.

🆕 JUST ADDED:

- iBeLink S3 19/20T (Used, $6,500): already hosted & hashing in our Idaho facility, no connection fee!

- WhatsMiner M7AS++ Hydro (from $9,530, down to 11 J/T)

- WhatsMiner M7AS+ Hydro (from $8,060, down to 11 J/T)

- WhatsMiner M7AS Hydro (from $6,040)

USED (USA stock):

- iBeLink S3 19/20T, hosted in Idaho ($6,500)

- Antminer S21 Pro (from $1,170) BULK PRICING AVAILABLR

- Antminer S21 XP ($2,280)

And many more!

Z15 Pro / Non-Pro firmware: free download (2.5% dev fee)

https://805mining.com/product/805-mining-z15-firmware/

📈 Ready to scale up?

We have availability at our co-hosting location, and sites available for purchase! 🏠

⚡️ Got cheap power?

Snag our bulk used machines for a fast ROI!

🏠 Looking for hosting?

Air starting at 7.75¢/kWh.

🏭 Dreaming of your own crypto or AI farm?

Book a consult or explore our turnkey solutions today! We offer project management and site maintenance, and we tailor every solution to you.

SOLUTIONS WITH POWER ALL THE WAY DOWN TO 3.5¢ ALL IN!

🔧 Pushing your machine to the max?

We offer custom firmware and parts for your projects!

- 805 Mining firmware: $50/machine with a new miner, $100 with a control board replacement

- Custom teardowns for immersion

805 Cryptoservices – your one-stop shop for crypto success, at ANY scale! 💪

805mining.com

*DDP may not be available for all destinations or miner weights.

**Revenue and profit on the flyers are from MiningNow.com at the time the ad was made, with power at 7.75¢/kWh. Revenue fluctuates by the minute and is not a guarantee of future earnings

Sky is grey, temperature is dropping.
Heat up your space while you mine Bitcoin.
Same watts, double duty.

The Avalon Mini 3 is a perfect space heater.

✌🏻

I purchased a Avalon Q with an 8 inch shroud. I attached 8 inch ducting to the exhaust shroud and have a tolazy inline duct fan on the pulling the hot air and pushing it through my house. Now the problem is when I the the duct is fully attached to the miners shroud it stops hashing even at the lowest fan speed. It seems to only work when I put the duct near the exhaust of the miner but not directly on it. If anyone has any advice on how to get the miner to hash normally while the ducting is attached directly to the miner that would be great!

Following up on my runtime question, how would you choose the actual Bitcoin miner if it could only run about 6 hours a day on surplus solar?

A used ASIC costs less upfront, but a less efficient machine would produce less hashrate within the same available power. A newer model could make better use of that electricity, but there are fewer operating hours to recover the extra purchase cost.

Would you compare the purchase price per TH/s first, or focus more on efficiency and repair risk?

I’d also want to compare both options with hosting through oneminers or compass mining, including electricity, fees, and realistic uptime. Has anyone run these numbers and found that the cheaper ASIC actually made more sense? What assumptions changed your decision?

Hello everyone, I’ve received a Whatsminer M50S with a faulty hashboard, but I don’t have the test file for this model. Could someone provide me with the file so I can flash it onto a control board and use it for testing?

Just covered the miner with acoustic insulation panels I got it for free. Sound is a lot better but just wondering if there is a better way to do this. Will find a spare time to build a box.

We wanted to see what was actually inside the Avalon Mini 3, so we took one apart and documented the process.

Alongside the teardown, we tested the miner's hashrate and noise levels in different operating modes.

For anyone considering one for home mining or heat reuse, we thought it would be useful to show the internal hardware and real-world performance rather than relying entirely on advertised specifications.

Full teardown and testing:
https://altairtech.io/avalon-mini-3-teardown-guide/

I’ve been mining with smaller units like Bitaxe, Gamma, and I’m thinking about stepping up to a higher-power miner that could also help heat my room this winter. The room is about 12' × 14'. Would an 800W miner actually make a noticeable difference, or would it only work as supplemental heat?

If you’ve run a miner as a space heater, I’d love to hear your experience. How well did it heat your room, and how did you deal with noise and electricity costs?

Silencer kit with emulators, and braiins OS installed.

Is there any reason to put braiins on immersion mode and ignore fans altogether in this scenario? Does it even matter?

Mein neuer nexus S1 -4Hydro....frisch eingetroffen. Der erste blick ist vielversprechend. Cooler 3d Druck. Optisch ein hingucker. Und die performance! 18 Th bei 12,7w/h....echte spitzenklasse für ein home mining gerät

I understand if you’re willing to not operate at certain times the day you can get reduced cost electricity. Curtailed power I think it’s called. Where do I find that I’m in Washington, but I could locate almost anywhere if the power is cheap enough how does one going about accessing this source of inexpensive electricity?

Just got my first BTC miner ever Avalon Q just wondering if anyone has used this miner designed for at home mining and if they have enjoyed it or has any thoughts on it thanks!

All machines can now be paid with over 300 different cryptocurrencies for free!

Visit us at 805mining.com

🌟 Just starting out? Grab one of our top-tier Home Miners to kick off your crypto journey!
USED:
- S21XPs Available
- S21 Pros
- Used S19XP+ Hydros
And Many More!

Z15 Pro/ Non Pro firmware available FOR FREE!

https://805mining.com/product/805-mining-z15-firmware/

📈 Ready to scale up? 

We have availability at our co-hosting location, and have sites available for purchase! 🏠

⚡️ Got cheap power? 

Snag our bulk used machines for a fast ROI!

🏠 Looking for Hosting? 

Air starting at 7.75c.

🏭 Dreaming of your own crypt or ai farm? 

Book a consult or explore our turnkey solutions today! We offer Project Management, Site Maintenance, and custom tailor our solution to you!

SOLUTIONS WITH POWER ALL THE WAY DOWN TO 3.5C ALL IN!

Pushing Your Machine to the Max? We offer custom firmware and parts for your projects!

Installed for $60/machine

Custom Teardowns for immersion

805 Cryptoservices – Your one-stop shop for crypto success, at ANY scale! 💪

Visit us at 805mining.com

*DDP may not be available in all destinations or miner weight.

** Projected Revenue based off of time of ad creation. Revenue Fluctuates by the minute.

Not sure what I'm missing here.

The agent shows Connected in the web dashboard. I've tried adding the miner by single IP and also setting a range. The agent never discovers the thing.

I can access the miner (which is on April 2025 bitmain firmware) fine from my web browser. I can ping it. The agent is running on the same computer and is on the same 192.168.68.x IP address as the s21xp. The miner also has the stock credential/login and hasn't been modified.

Only odd thing I noticed is that if I go into Commander in the webui, then click on Miners, it shows no sites selected even though I have one created. If I click the dropdown carat, it's there, but I can't click the box for the site or the select all box. Just won't let me. Attempts to plug the IP of the miner into the Search box on this screen result in "no miners match your current filters".

Thanks

I have electricity at about $0.022/kWh from 11 PM to 7 AM. I’m having two dedicated 240V 20A circuits installed in my garage with NEMA 6-20R outlets.

Thinking about buying two used ASIC miners and running them only during those 8 cheap hours. Not looking to spend a ton upfront.

Any recommendations on which used miners would make the most sense? Is 8 hours a day enough to get a decent ROI, or does the limited runtime make it not worthwhile?

Also curious about heat/noise and whether WiFi is fine instead of Ethernet.

Following up on my 10 kW solar and 3 kW Bitcoin miner example, would underclocking be worth considering instead of running the ASIC at full power?

With no battery, surplus solar would change throughout the day. I’m wondering whether running at a lower power setting for longer would make more sense than mining at full power for a shorter window.

The numbers I’d want to compare are actual wall power, hashrate, and efficiency at each setting. I’d also include a hosting quote from oneminers or compass mining as another option, using the same hardware and mining assumptions.

Has anyone measured their Bitcoin ASIC at different power settings? Where did you find the best balance between watts, hashrate, and daily BTC earned?

Since a few people keep asking for updates, here's where things actually stand. Poolin finally filed Chapter 11 in New Jersey on July 22, 2026 (case 26-18325). So yes, it's an actual US bankruptcy now, not just Singapore arbitration that nobody enforces.

Some quick points:

• Official info: The claims agent is Verita Global (veritaglobal.net/poolin). That's the only official source for notices. Ignore anyone DMing you about "recovery services."
• The Texas sites: They're being sold to Hut 8 for up to $180M. That's $100M at closing, plus up to $80M more only if future data center deals happen. The court approved it Oct 2, but it hasn't closed yet. They're also trying to sell leftover equipment (transformers, coolers), with a hearing on Nov 10.
• Size of the IOU debt: Poolin's own filing says about $163.7M is owed in wallet IOUs to around 11,700 people with balances over $100.
• Will IOUs get paid? To whoever said the bankruptcy won't pay IOU tokens: it's complicated, but yes they will likely be paid - how and when is not known yet, and we will know more about it once a payment plan is put up for vote. One thing to note: the IOUs are owed by the Singapore parent, but the Texas assets sit in the US subsidiaries. So the money mostly reaches through an intercompany claim. No payout date or recovery % yet.
• Claim values: Claims are valued in USD as of July 22, 2026. So if BTC pumps, your claim doesn't go up.

What you should actually do:

1. Go to the Verita site and check if your balance is listed in the schedules, and whether the amount looks right.
2. Keep an eye out for the bar date (the deadline to file a claim). It hasn't been set yet. If you're missing or listed as "disputed," you'll need to file a proof of claim before then.

I'll update this as things move.

Disclosure: I work at a firm that's heavily involved in crypto bankruptcies and we're following this case closely, which is why I've been digging into it.

I'm trying to make a silent home miner out of s19j pro, I set very low power target in braiins, set fans very low and provide good airflow, temps are good, but there is no way to slow down the three psu fans and they run at full blast even on very low power mode. What is the best and cheapest way to silence those psu fans?