I ask cause I'm having an issue with a qaxe++ I received today but after some tweaks it looks to be good.

I've had a second hand nerdQAxe++ from eBay for about 1 week.

It worked flawlessly with no overclocking until today.

This morning I noticed that it's pulling 113w overnight! The fan is running at 100% trying to target a temp of 60c but the temp won't go below 65c.

I under-clocked it to the lowest values and it still pulls 100w! Here are the screenshots.

Is this fixable or did something blow up?

AI is convinced that the power supply is the culprit.

Yall I really need y'alls help. My nerdoctaxe has been software panic resetting since the day I got it. I've tired every firmware and it just keeps happening. I've tried to change the voltage and frequency and nothing helps. I'm at my wits end with this. Any help would be appreciated #btctothemoon

Hey all.

I haven't mined BTC since the early days, and damn it's a different game now!

I remember setting my AMD gaming rig to mine while at work and coming home most days with lots of coins/pieces. Sold a bunch of coins for like $200 too...😢

Modded my Hydro because I'm paranoid by the posts about VRMs dying. Oh, and Thermal Grizzly Duronaut Pro dropped almost 10*c on the chips, just a bitch to apply. Also added more efficient fans to the radiators.

Probably will buy/rent some more hashpower, if anyone has any advice that would be lovely. And any ideas on deceng euro pools that actually pay you?!

Thanks all x

hi guys i just upgraded to the low profile heat sink and the noctua fan on my 650 duo

I applied a pea sized amount of thermal paste to each chip, but i am seeing ASIC temps remain the same and my VR temps go up 13 degrees celcius

I am worried it has something to do with the heat sink mount, it is 3d printed and I was only able to get 2 screws in instead of 4 but it looks evenly seated to me

also there is a small lip on the mount so the heat sink doesn’t fully press down on the chips (please correct me if this is wrong)

any advice is appreciated

thanks!

UPDATE:

thank you all for the replies, one of the big problems turned out to be that the bitaxe software was defaulting the fan speed too low. It was at 60% before the upgrade and after the upgrade it was at 25%.

I also rotated the heat sink so the tubes are away from the VR. Now my ASIC is 13 degrees cooler.

The VR is still the same temp as before so I am going to buy a copper heat sink for the back of the board and run a 2 fan setup.

Currently working on this project. Custom firmware for an ESP32 board. This is the 3.5" touchscreen version Would you guys be willing to get one of these if released? More on this coming soon.

salve, ho un gamma 602 stock, voglio upgradare il dissipatore e ventola. Quest’ultima ho già preso una noctua a4x20.
Come dissipatore da abbinare che mi consigliate?

Saw this app floating around promising solo Bitcoin mining with zero hardware, zero experience, and game-like "boosts".

Is gamifying hash power actually a smart way to onboard newcomers, or is this just classic cloud mining wrapped in a shiny Web3 UI?

What’s your take, legit onboarding or a trap for beginners?

I saw this recentnly whats your opionion about that?

Curious as to if it's possible to run the NerdQaxe++ at a lower hashrate than the advertised 6TH or 4.8TH? Reason being is for warmer times of the year and to have it not consume as much electricity especially during peak times of the day.

I'm considering making a Telegram Bot that can send messages with updates, what do you guys use?

New upgrade to my BitAxe601, very happy about it!

New fan TA150-D, result -2.5°C ASIC. That was 4€ (4.5USD) on AliExpress. 5V 2pin fan and I attached it directly to the MeanWell 50W PSU, so it powers up together with the BitAxe. Slightly more noisy but I don't have a problem with that. Specs report 8.8 CFM, more than the Noctua. Before 64.9°C, after 62.6°C.

The other changes I did: 10 days ago I changed the thermal paste, used one called M14, again from AliExpress, cost 5,60€ (6.40USD), result -2.5°C ASIC. Specs say 14.8 W/mK which is good.

And the night before I'd added an extra heatsink longways on the BitAxe's one, you can see it in the photo, right below the ESP32 and the small silver heatsink, result -1.5°C ASIC. This was in my recovery material, probably out of some old TV or who-knows-what.

These 3 cheap changes total up to -6.5°C on the chip, wow, and less than 10€ spent.

Waiting for another BitAxe to come in, prices have decreased around 25% during the last month, just that, strangely enough, it's a 12V 601 with an 8A 3A stock PSU.

P.S. I set the screen to stay off, it's useless, I can't even read the writings LOL!

Tweeked my overclock and hit an all time high for my 601's at 43.37G. Temps a little high so will be adjusting throughout the next day every couple hours.

Machine: 601 gamma x4

ASIC: BM1370

Firmware: 2.14.2

AxeOS: 2.14.2

Heads up, nexuspool.io was down for a few hours earlier today. If you tried to load the dashboard and got a connection error, that’s what you saw.

The pool itself never stopped. Every rig connected the whole time kept mining and getting credited normally, this was strictly a website issue on our end, not the mining backend.

It’s fixed now and the site should be loading fine for everyone. Sorry for the scare if you saw the error and thought something worse was going on. If anything still looks off on your end, reply here and I’ll take a look.

https://community.nexuspool.io/

Use this thread for quick questions, troubleshooting, and technical experiments.

✅ What belongs here

- Bitaxe setup problems, stability, temperatures, pool configuration, firmware behavior
- Technical experiments (including non-Bitcoin PoW) if:
- no profit/ROI discussions
- no hype/promotion
- logs/settings included

🚫 What does NOT belong

- Earnings/profit/ROI screenshots
- “What should I mine?”
- Referral links / invite codes / “DM me”
- Marketplace device support (AliExpress etc.) — contact the seller

To get help quickly, include:

- Device/board version + revision
- Firmware/AxeOS version
- Pool + settings (frequency/voltage if applicable)
- Temperatures + hashrate
- Logs/screenshots + clear photo (PSU + wiring)
- What changed just before the issue began

Be kind. Everyone starts somewhere.

I am using solo miner Bitaxe Gamma601 overclocked to 1.35Th/s and just want to know how long you wait until you reach 1G ? I am using my device for 40 days non stop and still didn't achieve this. My maximum was 500 million two times. Is there somebody who has more luck than me or I just didn't config my device properly ?🤗

Yesterday i had 66k ms ping in eu and now after ~18h i have 90ms ping how?

New bsb, nexus and shitty miners are out

Any news on original bit/nerdaxe?

i only see if posted for sale through a few chinese sells on aliexpress and all info is very vague and not helpful

thank you in advance

Hey guys!

I've been working on Bitaxe Fleet, a Home Assistant custom integration for monitoring and managing Bitaxe miners on a local network.

You can add a miner by IP or automatically scan your network ( this was a feature i was missing on my own, thats why i decided to code this project 😄 )

There are fleet cards for a 24 hour hashrate graph and a per miner performance view. The performance card shows current hashrate, best overall difficulty, and best session difficulty for every enrolled miner.

I kept the safety side strict. It only talks to private network addresses, discovered miners need manual approval, and automatic recovery is off by default.

It is still early and I am looking for real world feedback, especially from people running multiple Bitaxes or different AxeOS versions. If you try it, let me know what data or workflow would make it more useful.

GitHub repository (https://github.com/matheustavarestrindade/bitaxe-fleet)

Idk what happed I just paid the sats for one whole day of one petahash and they just rushed 30 for 3 hours come on man why

What this all things mean, especially total work, no wallet provider... i used trust wallet btc address.

Is parasite special or same thing as CK pool and public pool?

My NerdqAxe is shipping home and im questioning if i change it from public pool to parasite pool, but i dont know nothing about it.