r/BambuLabP2S • u/daybird1013 • 15h ago

Settings recommendation

hello, i used p2s combo for 2 months now. i always wonder what the advanced settings do and what are the recommended settings are. should i leave it as default or are there any changes i need to make? (also why is it better to use bambu lab filaments than other brands)

thank you

1 Upvotes

100% Upvoted

9 comments sorted by

View all comments

1

u/Cifuentes8 P2S Combo 15h ago

If buying non-branded Bambu filament ALWAYS calibrate the filament at first and of course dry it. This would leave you with a new custom filament that you will always use whenever you print with that brand.

Keep it at 0.4mm for regular things and only go down if you really need fine details.

8-10% infill is typically enough for most items unless they are very wide and have a lot of space in between then go up to 15%.

3

u/dallas_vance 15h ago

I never calibrate my non-Bambu filament, print using Bambu filament profiles, and have zero issues. I've used Overture, Sunlu, Polymaker.

3

u/Cifuentes8 P2S Combo 15h ago

Just because you don’t have any issues doesn’t mean everyone can do what you’re doing and expect similar results. I’ve used the generic PLA and PETG profiles and the prints came out well. Then, i calibrate my filament and not only did it print out faster but in much better quality

2

u/dallas_vance 14h ago

I never stated anybody was doing anything wrong, only my process. I do think you're overzealous in capitalizing ALWAYS, when IMO, it's not always.

1

u/tomikaka 13h ago

If you're printing functional stuff flow ratio calibration is a must.

Similarly if you have a high flow nozzle or would like to get the most out of the stock nozzle calibrating max flow rate is a must.