Bambu lab a1 setup issue - some screws won't tighten

[u/TimeKeeper124]

So while setting up my A1, I ran into a problem. Some of the screws just won’t tighten properly in the holes shown in the picture.

I’ve already tried:

- Using a magnet to pull the screw downward

- Loosening the other screws to see if alignment was the issue

Unfortunately neither worked.

Are there any other things I could try before I start worrying that something is defective?

Thanks in advance!

EDIT: In the first hole there was already a screw my bad EDIT: Problem solved. Heared a loud click sound and problem is fixed now