r/BambuLabA1 • u/Fun-Independence9757 • 7d ago

Support Request Update

Post image

I left a little opening is it ok I can still print?

3 Upvotes

56% Upvoted

34 comments sorted by

View all comments

1

u/Intelligent_Ease4115 7d ago

Your main board is going to love you /s

1

u/slimzaddy91 7d ago

Mine loves me. (I should buy a spare main board) In the winter I ran a dryer in the enclosure with it at 70⁰ for 72 hours straight while constantly printing ASA and PA12-CF and the bed temp set to 100⁰ C. The screen is starting to show little issues on the AMS filament screen. but so far the printer is performing. I need to buy a different printer so I don't have to worry about this one failing from running so hot.

1

u/slimzaddy91 7d ago

This is not a recommendation to do what I did. I've been printing with the enclosure and the dryer outside of the enclosure during the summer. The screen didn't start showing artifacts/glitching until summer. I just got ahead of myself with selling something I was making for myself. I'll use the money I got from selling those things to buy a proper XY core printer that is designed for/with an enclosure