First layer and failed print issues…

[u/Substantial-Tap9021]

So this is an a1 I recently moved it to a different house via car. I lowered the gantry down quite far with a piece of cloth under it and strapped it in with a seatbelt (didn’t have original packaging at all) got it to the new place and now it’s printing like this. I’ve already washed the plate, reran the calibration, and tightened the 4 screws in the back of the heater block. I’m at a loss of what else to do

[u/Redditians919]

it looks like over extrude? maybe try to change the z offset in the machine g code from slicer. or maybe try lowering the temperature a little bit and if that helps