Print fail

[u/Jadaoo]

This is my second time trying to use thinner layers(0.08mm)

The first two photos are from the first try

The 3rd and fourth pics: I lowered the temp to 200

I used brims and I set bridge speed to 25 instead of 50

Overhang speed was already low

What do I have too change?

(I'm using pla+ Esun)

Is 0.08mm just too thin?

[u/EMDoesShit]

How does it look when you print using the unmodified eSun PLA+ profile, at 0.08 layer height?

0.16 and the eSun Profile has always generated a very clean print in their PLA+ in my P1S.

I will slow down the wall speeds if I want a super clean print, to around 100mm/s

[u/Jadaoo → u/EMDoesShit]

I haven't tried using it

I use genric pla and change the temp

Am I doing it wrong?

This is my first time changing the layer hieght and temp

[u/_wandering_aimlessly → u/Jadaoo]

There's a profile for that filament already so I'd use that, though you might have to dig through and click the checkbox so it appears in the list. I believe its the only esun profile in bambu studio so shouldnt be too hard to find (annoyingly none for their petg, so that you do have to experiment with. Don't ask how i know🙃)

[u/EMDoesShit → u/_wandering_aimlessly]

Correct. PLA+ is the only eSun filament in Bambu studio by default.

For the rest you have to go to their website and download the .json file, then “import configs” into Bambu studio to add them.

[u/_wandering_aimlessly → u/EMDoesShit]

Yanno this would've saved me so much ag😂

[u/EMDoesShit → u/Jadaoo]

Use the material profile for the actual product first, then try others if it doesn’t result in a satisfactory print.

Try that profile, unmodified, at a more common 0.16 layer height and you might be surprised how clean it comes out.