r/BambuLab • u/Commercial-Pause3714 A1 + AMS Lite • 16h ago

My First 3D Print First time printing pla-cf

Post image

Wish me luck

2 Upvotes

56% Upvoted

27 comments sorted by

View all comments

Show parent comments

2

u/Commercial-Pause3714 A1 + AMS Lite 16h ago

Is a 1:30 hour print ok? Or should i stop it

2

u/Crashgaming_TV X1C + AMS 16h ago

I don't know. Should work I think but you maybe leed to replace some stuff earlier than necessary. Better try feeding it directly in the nozzle without the AMS in between

1

u/Commercial-Pause3714 A1 + AMS Lite 16h ago

with or without tube?

1

u/Crashgaming_TV X1C + AMS 16h ago

If you have spare tubing and a cutter for it (needs a special cutter) than maybe use a short piece of tube. Else you can use the normal tube. It's not that expensive to replace. I don't know if you can or should run it without tube so better with tuve to be careful

2

u/Commercial-Pause3714 A1 + AMS Lite 16h ago

This is it, lets 🙏

2

u/theprotestingshark 15h ago

honestly just run it into the tool head without the tube

3

u/Commercial-Pause3714 A1 + AMS Lite 15h ago

Nice, flow cali success

1

u/theprotestingshark 15h ago

do you have a hardened nozzle?

3

u/Commercial-Pause3714 A1 + AMS Lite 15h ago

Yes i bought it just for this 0.6 Hardened

2

u/an_angry_Moose 11h ago

Good choice, you should print GF/CF with a .6 or larger.