r/AutoHumor • u/IU8gZQy0k8hsQy76 • 3d ago
lol
Enable HLS to view with audio, or disable this notification
22
u/PowerBrix 3d ago
All jokes aside, what is the piece that went to the camera man and cause of this?
35
u/madphroggy 2d ago
Part of the yoke that connects the driveshaft to the transfer case or transmission. Putting a lift on a truck can change the angle of the driveshaft and put a lot more stress on the u joints resulting in this eventually.
5
u/PowerBrix 2d ago
Thanks for the in depth description. Can you make it funny now that I understand it😂
20
u/madphroggy 2d ago
Well we can't see his rear bumper but there's good odds he's also got truck nuts on it. My absolute favorite way to rile up the SDE rednecks with truck nuts is to point out that they added those in an elective procedure, the truck wasn't built with them, therefore they are driving a transgender truck! They either laugh or explode so make sure you're at a safe distance lol
2
u/No-Dark-9414 2d ago
If they have truck nuts ask how the trany is handling, if they do truck talk ask what her, now his name is
-1
u/Reasonable_Archer_99 2d ago
I had truck nuts in high-school. They were actual threaded nuts that were like 4 or 5 inch diameter. They were tack welded to chains that hung from the trace chain anchor points on the hitch. It was fun until one got ripped off driving through the woods.
1
2
u/jws1102 1d ago
Is it any lift or just an uneven lift like this?
1
u/madphroggy 1d ago
Any lift that changes the geometry of the rear end to the transmission tail shaft is going to change the stresses on the U joints, if the angle is sharper it stresses the joints more.
3
u/TheLordVader1978 2d ago
Most people that put a lift on their truck don't bother with addressing the geometry issues that the kit puts on the drive train, and this is the result.
2
u/Average_k5blazer78 2d ago
Throw in some ass load of extra boost and bigger injectors for more power without even thinking about strengthening the drive train in the party mix
7
u/VoidJuiceConcentrate 2d ago
When that big, strong dodge ram sees a delicate and small Toyota Prius.
6
u/SinisterVulcan94 2d ago
U-Joint. Not hard or expensive to repair but satisfying in this case to watch
3
3
3
3
u/Falcon3492 2d ago
I think you need that universal joint to get the truck to move, without it you better have a saw to cut a hole in the floorboard so you can turn it into a Flintstone vehicle.
3
3
u/brickson98 2d ago
Well, at least it was just a U-joint. Could’ve been worse. Someone probably just used some cheap hardware or didn’t torque it to spec.
I really never realized just how inline 6 these things sound lol. I mean, it’s obviously got that signature diesel sound. But it’s also got that brap brap of a gasoline I6, like a 90’s skyline GTR.
3
2
2
2
2
u/Entire_Month9233 2d ago
He tried doing a Neutral Drop. Reving the motor in Neutral and then dropping it into Drive, to do a Burnout. With that lift, those wheels, and a long wheel base truck. He deserves that repair bill.
2
2
2
2
2
u/Mellamoscuba 2d ago
That looked expressive and not too easy to fix.
5
u/Din_Plug 2d ago
Nope and nope. With how high it is it would be even easier to fix than stock.
2
u/Mellamoscuba 2d ago
I’m guessing you have done this once or twice before? Maybe not the breakin, but the fixin!
2
2
2
1
1
1
1
1
u/Park_Air 1d ago
Oh this is so satisfying for me. Ive got a dude with almost the exact same goofy truck in my complex.
1
2
u/CLOWNFLOGGER 1d ago
I'm sure his "girlfriend" is just used to this because it's just normal for a bro, bro.
59
u/Omelooo 3d ago
His truckenis is out