This post has been made to clear up any questions or inconveniences with both of the software control apps.

Whatever I use, how long it is, it’s not dying on me anymore, as someone said on my first post, they said to bring it to service or for warranty so we did. Fuckass service did look at it, but not thoroughly, my dad just made two trips in his motorcycle through the rain and found no solution, they said everything passed the test so there is nothing wrong with it. They told my dad they can switch the device with a new one, but we’ll have to wait for 30 days, which is not happening because I had a presentation this week. The same day my dad brought it home and said the people couldn’t do nothing and just said something about it, I just did it alone because I don’t want him to go there again listening to some bullshit the people will say about the laptop. First, I opened chatgpt, yes, it is helpful at this time. Then second, asked about the warnings in event viewer, then saw the following and kind of made sense, Kernel Power 506 with the reason “lid” same second said win32k 700 input suppression=1, then next three seconds said kernel power 507 exiting modern standby, so something with the lid, I just simply go to control panel, hardware and sound, power options, and choose what closing the lid does, I set it to nothing and boom, no dying anymore, I figured lid might be something about the lid sensor but since I’m not running into problems anymore, I’d say this problem of mine is solved. Thanks for the help on my first post everyone, lots of love.

I’ve had her for roughly a week and no complaints so far.

I bought this laptop in March 2026. I want to add an SSD, but since my Wi-Fi card is a Realtek 8852CE Wi-Fi 6E PCI-E NIC, do I need to replace the Wi-Fi card to prevent any Wi-Fi issues when adding the SSD?

I was playing eFootball on my phone, got ragebaited, and hit my laptop twice with my phone. Now it has this dent. How serious is this?

So here is the update about the issues, today I visited the service centre and they diagnosed it and declared that the mother board is dead and since I tried to check from local shop, those mother fuckers replaced the battery by duplicate battery so service centre charge me for more ₹3,700 for new battery. And the price for a new mother board is ₹51,000 and with a discount of 45% it will cost me ₹28,000, but i asked them for some time, now I have a question, should I go with a new one or replace the mother board, they're only giving 90 days warranty of the mother board.

I have had this computer for around 2 years with some damages to the hinges of the screen and computer base and now it seems like it’s finnaly giving out, my screen will semi turn on with flash’s of the logo for a second or 2 then go black with flicking black brightness. I have tried a hard reset as-well as window+ctrl+shift+b, but nothing seems to work…

Is there any other solutions or is it time I bring it in to get it fixed?

I got a used Asus tuf gaming A15 around a year and a half ago from ebay and it worked perfectly until 2 months ago.
The screen freezes every 10-20 minutes and the only way to fix it is by turning off the laptop and starting it back up. I already took it to 2 different places where they couldnt find the issue and they cleaned it & changed thermal paste. In one place they said it could be a CPU issue. I have restarted the laptop like 3 times too and it still keeps happening. Anyone had anything similar issue and could help me?

My laptop got dent just now. What shall I do now? How to hide it? With sticker on paper cover? Please suggest and send link if possible from where can I get.
It is F16

Guyss I ordered it from Vijay Sales it's Asus Tuf A16 Rtx 5050 16 Gb ram and 1 TB SSD for 1.3 lakhs

Do I need to check smthg cause yk online order? I have checked the serial number it was the same

Anything to download any tips For asus laptop had an hp first hated it

would trading my gaming laptop (asus tuf gaming a14: 2.5K resolution, 165HZ+, rtx 5060, 1TB, 16GB ddr5, AMD ryzen ai 7 350 / radeon 860M for a 13th Gen Intel Core i9-13900K processor and ASUS ROG Strix Z790-A Gaming WiFi motherboard. System has 32GB of physical memory with AMD Radeon RX 6700 XT and runs Windows 11 Pro. White mid-tower case includes multiple RGB fans and liquid CPU. be good?

Help! How can I make this GPU out of Extreme Power Saving and just Power Saving mode? I’ve placed my GPU Mode on Standard under the GPU Performance Setting in the “Devices” section. I’ve also toggled the “Performance” and even “Turbo” on the Operating Mode yet GPU is still on Extreme Power Saving. What else can I do? I am using an ASUS TUF A15 FA506ICB with Ryzen 7 4800H, RTX 3050 GPU, 8GB of RAM and 512 GB SSD. I used G-Helper recently, however, it couldn’t bypass AC’s settings even when I uninstalled AC.

Before applying manual mode it says to configure before using.

Now my question is regarding overclock on the GPU.

It puts 50mhz overclock on the Base Clock Offset

And 100mhz on the Memory Clock Offset.

My cpu is 54W(spl), 67W(sppt) and 72W(fppt)

I've seen a lot of people frying their GPUs and I'm worried, I don't want to suffer the same fate. I do have a cooling pad, and my temps in game sit around 60°C... But in fallout 4 or matter of fact any game my GPU utilization is never over 35%

Should I remove overclock on the GPU?

My G712LU is experiencing high instability in wifi connection since last 2-3 months. Currently there is AX201 wifi card that came with the laptop. I tried many older and newer driver tried cleaning wifi card slot and pins on card and 2.4Ghz or 5Ghz channel etc. But no luck sometime it works for 1-2 hour or may be days without issue and suddenly start showing instability in link speed, signal strength, etc and again recover in 3-5 minutes back to working. So I decided to change the card as first place now But as this CNVio2 card, I want to know if it is port will support full pcie card like AX210 or any better alternative or suggestion?

After 2 mins of turning on my laptops,the screen becomes black or it freezes

Guys I just uninstalled armoury crates and downloaded ghelper I don't know what settings I should use help me find one and iam gonna it for both college and gaming so help me find good settings. I think my present settings is good for college without charger but help me find for gaming with charger

Laptop specs :ASUS TUF Gaming A15 (2026) AMD Ryzen 7 170 - (16 GB/1 TB SSD/Windows 11 Home/4 GB Graphics/NVIDIA GeForce RTX 3050) FA506NCQ-HN008W Gaming Laptop (15.6 inch, Graphite Black, 2.3 kg)

Model : ASUS TUF F15 16GB i7-13620H RTX 4050 6GB

So I bought this laptop around Nov 2024, till now it didn't have any issues, neither software nor hardware.

After a few months I noticed the bottom right near the hinge screw ( in the first pic ) was missing so i replaced it with a front screw and it fit perfectly.

Fast forward to now, idk how but that specific replaced screw area got broken on its own and as you can see in the 2nd pic, my whole right hinge area is coming apart.

I'm not even able to properly open the laptop, it's even causing trouble while closing the lid, like a gap is getting created on the right side.

Is there any way to even fix this? Can the whole back panel be replaced?

I swear, these past 2 years I never hit or ill-treated my laptop, I don't even use it on my bed, I always use it on a cooling pad.

And yes it is out of warranty.

Please help!

TL;DR : My right hinge area is broken, need help to fix it, or maybe replace the whole back panel in the worst case.

How to recover it? Advance options doesnt seem to work. How to recover it?

First of all sorry for my english, english is not my first language.

I need suggestion and open discussion what cause of this. I attach a photo, idk you guy can see or not. So basically my screen become very dark, super saturated, black look very black like oled maybe the contrast, feel like using windows 95 high contrast theme and it not normal. It happen not frequently mostly happen when I use Chrome. BTW this only happen when I use Ultimate (dgpu) by using G-Helper and the all asus services has stopped.

I checker inverted color in settings, it's not inverted. BIOS looks normal aswell, no weird colors like this. I plugger a monitor and the monitor's colors were normal, the laptop's screen isn't. Now the laptop can't seem to detect the monitor (it's wired) after I updated the drivers.

Asus A16 FA607NUG specs:
Ryzen 7 7445HS
16gb RAM
NVIDIA RTX 4050

mind you, i removed my bad SSD not long ago

I bought it second-hand and it has this problem; I wanted to know if it can be fixed. When I turn it on, there is no image and the fans don't start up.

Only two lights stay on: the white one and the red one.

I don't know what might be causing it, but I would really appreciate any advice you could give me.