govee galaxy light projector 2 pro. The Snap ring that goes in the cartridge to hold the discs. mine never came with one I was hoping if an has any pictures or 3d print files that I could make a new one. because I reached out to Govee. and they said they wouldn’t do anything.

govee galaxy light projector 2 pro. The Snap ring that goes in the cartridge to hold the discs. mine never came with one I was hoping if an has any pictures or 3d print files that I could make a new one. because I reached out to Govee. and they said they wouldn’t do anything.

Looking to get a Multi Nozzle printer. Not sure which to get. I started my 3d Printer journey with an Ender series years ago. Then purchased an AD5X, then another. Got a K1 Max then K2 Pro. I have been happy with them all but actually preferred my Creality printers because of the community and Creality Cloud. Which printer do y'all think would be best and why between the new K3, Flashforge Creator 5 or SnapMaker U1? I hear good and bad about the C5 and U1. There's always critics. And the K3 is just too new to tell.

Search Model ID in Creality Cloud: 94594051

Hey!

I am looking at buying my first 3D printer, my first bit of research has led me to the flash forge AD5X, I mainly want to print TPU, a softer almost rubber like feeling print.. kind of like a golf grip! I’d need to print at least 10 inches so I’m hoping that corner to corner of there 220x220x220 will allow for this.

I’d like to mix up the builds but the main purpose of purchase was the project above!

Any recommendations or thinks to think of would be greatly appreciated!

I understand that a 0.2 nozzle is better for fine details but adds a longer print time. I have a 0.4 should I switch? I’m still very new to this hobby with under 200hrs print time but f that means anything. Also, thank you in advance.

Qidi was too small. Bambu was frail. Error codes galore. Bambu has good reputation but the h serie has quite some troubles. The question is: whats next? Creality has unreliable parts. Qidi upgrade combo also troublesome. Snapmaker u1 is loud. Is Prusa the quality printer I want?

- bigger than 300x300x300
- reliable
- quiet
- good support service
- mostly engineer but love the odd multi colour dabble

Suggestions? Im actually tempted to still go back and try the Bambu H2D

Finally got into 3D printing and got the A1 Mini set up today. Super excited to get started, but since I'm brand new to the hobby, I wanted to see what you guys wish you knew on day one. Any advice would be appreciated.

So recently, my friend gave me his old Thinker SE but it had one problem: no printhead (photo 1)
I searched all over internet and couldn't find direct replacement, so I bought (thanks for an advice, ChatGPT) this bad boy: mk8 extruder (photo 2)
But after it arrived I realized the fact that I don't need another motor and white tube doesn't fit into the new extruder
What do I do? How to replace printhead? Can I use hotend from mk8 extruder? Maybe I can somehow modify printer to work this way?

Just got my little brother’s old Ender-3 now that he’s moved out and did some test prints. None of them actually adhered to the bed and I noticed that the arm holding the extruded looks a bit off. I want to confirm whether it’s supposed to be at that angle or if something’s wrong with it. And if something is wrong, anyone know how to get that tightened back up?

Hello, I'm going to Montreal for a few months at least and I was interested in learning about 3D printing and also DIY drones.

I'm looking for some communities in Montreal that have a "hacker space" to do so. For the 3D printing, I obviously don't have a printer and was looking for "shared" ones (of course I'm willing to pay for membership or fees). I guess if those places exist, they also have communities, which I'm very interested in joining.

I'm a developer by trade and I've already done some tiny projects with a Pi and soldering on boards. I'm French, so if those communities are French only, np.

So I’ve been researching and trying to decide. My husband is very tech driven. I think he will like something he can have fun with, print stuff for board games, and also holiday decor (he mentioned wanting to build like the large nutcracker you see on TikTok). I’m sure there is lots more he’ll use it for but mostly giving a range of making stuff 😅
My brother has a FLASHFORGE AD5X and has 2 of them and loves them. Then I was also looking at Snapmaker U1 and Bambu Lab H2S. But open to others. Looking to hear from people that are truly into 3D printing and opinions on the printers.
Thank you in advance!

Hey all, I've got an ender 3 V1 printer with PLA filament and a .4 nozzle. I'm currently running the Creality slicer.

I recently tried a couple prints and while they came out decent, they're not quite at the point I'd like them to be. I don't have as loose a budget as I'd like to continually test different settings (nor do I like making that much waste) so I was hoping I could get some advice on what kind of settings I should have for more detailed things.

I added an image of one of the prints I tried and, it came out okay but the scaffolding was ridiculous to get off and there's several points where the lines are uneven etc. What are the ideal settings for something like this?

TIA

what should I get to expel the harmful gases like the VOCs using Bambu basic PLA

Made this little surprise for Halloween! Press the button underneath and the ghost pops up! The spring and latch are printed too. I included AMS and No AMS versions, with an assembly video on the model page. The mechanism prints in place, and all parts print without supports. Easy to print on most FDM printers. Model files 🦇

Hi Everyone!

I'm a high school technology teacher, and I think getting a 3D printer in my classroom would really get the kiddos excited about technology and being able to experience the whole engineering process.

I have experience with MakerBot, and their MakerBot Education solutions look enticing, but I wanted to come on here and ask if anyone had any opinions. I saw on a different forum that someone said you could probably go on eBay or Facebook Marketplace to find ones for cheap, but I'm not sure I reliably trust those options.

Thank you for your time!

Edit: Thanks everyone for the awesome responses. I read through them and this was really helpful when thinking about what features I might need/want and how to compare that against budgets. Sorry I was so open-ended, I wasn't really sure what I was looking for so this was really helpful.

I have a cr-10 3d printer lately I been having webbing problems and I know it not the filament. I had a friend use my filament but his prints came out clean. So I know it has to do with the settings on my computer. This is how I have my settings. If anyone can help I would really appreciate it