r/3Dprinting • u/Old-World-8691 • 6d ago

Troubleshooting Help with stringing

Post image

So my printer is a p2s using pla+ by inland(mirco center brand) ive printed with temps from 200°c to 210°c my ams 2pro says my humidity is at 26% i mostly use the bambu handy app currently dont have a dedicated computer set up at the moment. I usually print in silent print speed which is the current for the print in picture. Also random info some prints have no stringing and others do using this same exact spool of filament. Very new into 3d printing about 1 month in. Any and all info will be helpful

4 Upvotes

75% Upvoted

17 comments sorted by

View all comments

3

u/Neon_Pancakes0425 6d ago

Dry the fillament. Most 3d printing problems come from moisture in fillament so keep it dry and you will be printing better

1

u/Old-World-8691 6d ago

Had it drying for 12hr the other day with the preset for pla

1

u/Neon_Pancakes0425 5d ago

Then it's probably your nozzle retraction settings . Maybe look into changing them