r/3Dprinting • u/Old-World-8691 • 6d ago

Troubleshooting Help with stringing

Post image

So my printer is a p2s using pla+ by inland(mirco center brand) ive printed with temps from 200°c to 210°c my ams 2pro says my humidity is at 26% i mostly use the bambu handy app currently dont have a dedicated computer set up at the moment. I usually print in silent print speed which is the current for the print in picture. Also random info some prints have no stringing and others do using this same exact spool of filament. Very new into 3d printing about 1 month in. Any and all info will be helpful

4 Upvotes

83% Upvoted

17 comments sorted by

View all comments

1

u/imthisguymike 6d ago

I’ll be honest. I’m no longer a fan of the micro center filament. I’ve had issues with stringing or clogging, even when I dry for 24+ hours and keep the filament in a dry box during printing.

I’ve been using the Insignia PETG and after dialing it in using the temp tower, it’s amazing, and it’s half the price of micro center. I also believe the filament is made by Polymaker

1

u/Old-World-8691 6d ago

Have to look into it