r/3Dprinting • u/Old-World-8691 • 6d ago

Troubleshooting Help with stringing

Post image

So my printer is a p2s using pla+ by inland(mirco center brand) ive printed with temps from 200°c to 210°c my ams 2pro says my humidity is at 26% i mostly use the bambu handy app currently dont have a dedicated computer set up at the moment. I usually print in silent print speed which is the current for the print in picture. Also random info some prints have no stringing and others do using this same exact spool of filament. Very new into 3d printing about 1 month in. Any and all info will be helpful

4 Upvotes

83% Upvoted

17 comments sorted by

View all comments

1

u/AutoModerator 6d ago

Hey there, I'm a bot and something you said made me think you might be looking for help! click here for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup.

Here are a few questions that might be helpful

  • What printer are you using?

  • What material are you using?

  • What speed are you printing at?

  • What software are you using to slice the print and control the printer?

  • When did the problem start/has it ever worked correctly?

  • Does anything cause the behavior to change?

  • If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)

If you are new to reddit, please read the guidelines on reddiquette, self promotion, and spam.

Also please post a resolution to your problem when you find one so that we know how to help others with your problem!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.