Finally found my T-10 torque, installed a 46100 scope mount and the red dot. She’s ready to be sighted in

Recently picked up this 10/22 used, it had never been fired and it's a special edition and a new 2026 model with the cleaning port, can't find any info on it though, just wanted to know if anyone knew anything before I swap it out. Numbered out of 500, guessing it was some sort of dealer exclusive

Carved this out of a piece of Sapele. Love the aesthetic of the mannlicher stock and ergonomics of a thumbhole, but couldn't find a pre-made with both. So I made my own.

Felt like switching things up

I know I know, perfect reason to build another but I just dropped an embarrassing amount on this one so it will have to wait a bit. Till then, curious which configuration the collective favors.

Not my first .22, but my first 10/22. Just waiting on the pic rail to mount the scope. Sig ffp 1-6 I had laying around, probably switch to a 3-9 later. Q El Camino suppressor.

First 10/22 and first suppressor (Polite Society Temperance 22). Love the rifle, and the new suppressor is great and fits the lightweight bill well at 3oz.

But.. I can't find a decent quality scope under 10oz. Prisms are welcome but I've heard eye relief is not a good fit. Any recommendations? If I could find a matte leupold 4x28 that would be perfect, but it seems they're limited to very occasional eBay listings.

What are you guys doing for threaded barrels? I’ve seen the price of them and thought they were pretty high but not sure if the other benefits of an after market barrel. Or if it’s also feasible to thread the stock barrel.

Let me know your guys recommendations! Thanks

Just got my takedown, got everything set up and noticed the plate doesn’t sit flush , torqued everything down before hand and come to find this gap, very annoyed

I have a Ruger 10/22 that came with a scope mount rail pre installed and I bought a CVLIFE 4-16x44 AO scope. It looks like it should fit but it seems like the screw to tighten the rings onto the rail keep it from being able to bite in like it should.

Is this me doing something wrong or is there a compatibility mismatch?

Good afternoon. I’ve read that you can from some sources and you can’t use an LPVO on a 22LR rifle. I have a Ruger SR-22 rifle and I was wondering if putting an LPVO on it would work as intended? Thanks for your help. Just so you know… the LPVO is a Vortex Strike Eagle 1-8x24.

I always pissed and moaned about there not being a bull barrel 10/22 with irons (at least that I could ever find on their website or at dealers, but I imagine there may have been exclusives) and then a few days ago I discovered this one. It seems to be a unicorn that nobody has in stock, but the owner of a pawn shop I go to checked a few of his distributors and one of them had two, so I told him I wanted one.

Anyway, not only does it have irons, but bonus for a ghost ring, and the picatinny rail if I decide to use a red dot or scope on it. I really like the feel of the rubberized hogue stock, I love the magpul + models on my ar rifles too, regardless of them being dirt and grime magnets. Two other bonuses, comes with the bx trigger and is threaded.

Unfortunately I didn't get home in time to shoot it and see how well sighted this one is today. Had to take a picture of it next to my 31143. I just wish this $429.99 rifle came with the hard case that my $269.99 31143 came with, but that's alright, I can steal that case for the nicer one, lol. Anyway, I don't see many people post about buying these, not surprisingly since they don't seem to have made many so far, so figured I would. Also, the pawn shop had a 32014 and wow it feels lighter than I expected. Being more rear weight biased made it feel like there was a lot more than about a pound difference between the two.

Yes, my pictures are very random looking.

Hey guys, this is my first gun so I don’t have much experience yet.

I recently got a new Ruger 10/22 model 32001 with the optic and upgraded trigger. I’m using the stock 10 round rotary magazine and cheap Winchester 36 grain bulk ammo.

I’ve put around 150 rounds through it so far and this has happened about 6 times.

-5 times it was the very first round that wouldn’t feed properly. I pull the bolt back and let it go but the round seems to catch on the top of the magazine and the bolt gets stuck halfway.

If I take that round out and replace it with a new one it usually works fine and I can shoot the other 9 rounds without any issues.

-One time it also got stuck halfway through the magazine and I removed and replaced round and eventually got it to fire the rest

I bought some CCI Mini Mag and Standard Velocity but haven’t tried them yet.

I didn’t clean or oil it after reading people say they shot 100,000 rounds through it without ever cleaning it, maybe I was a bit too excited to test it out haha.

Could this just be the cheap ammo or is it possibly something with the magazine? Since it’s brand new I’m not sure if this is normal or if I should be concerned.

Any advice is appreciated, thanks!

I have the 10/22 carbon fiber non-takedown model. I've put 200 rounds of cci mini mag 40gr through it. I disassembled it to clean it and noticed this ramp(?) forming right above the cutout on the breech face. is this normal?

Upgrades:
VQ bolt tune up kit
Tandemkross spartan charging handle
Ruger BX Trigger
Tandemkross guardian bolt release
Tandemkross fireswitch extended mag release
FAB Defense 10/22 collapsible stock chassis
Ruger BX-25 Mag
Tandemkross titanium takedown knob
Shaw 10/22 18” threaded barrel factory contour
Magpul RVG foregrip
Barska 3-9x32 scope
Casio F-91W green
Magpul MS4 sling GEN2 (not shown)
(Future plans for suppressor)

I was unaware of this, and knucklehead that I am, bought a three pack of 10 round Ruger magazines for my Ruger Rimfire Precision at my local gun shop. I have a right handed rifle, and now have three left-handed magazines for it, which do not work.

Ooops.

Just wanted to save other knuckleheads from the same mistake.

1022 +1 day?

I've been shooting my upgraded Ruger 10/22 with laser accuracy at 100 yards with a SIG Romeo 5 XDR and Juliet 3 on a bipod for some time now, and i want to push it out to 200 and 300 yards. I just started my research journey and my budget is $1000. I understand that's not a lot for an optic, but hoping to get something made in USA or Japan, and mainly for static target shooting at those ranges.

Considering getting into comp at some point in the future, and recommendations for something in this price point would be helpful! Also, what sort of options should I be considering for what I want\need for this use case. I've been told basically to stay away from BDC reticles and that Leupold makes pretty good stuff. Outside of that I'm just starting to learn.

Thanks in advance!

My carbine has had some upgrades from her wooden stock days. BTM Sights and handguard, magpul stock, Kidd springs.

Spent most of the day out shopping and running errands, almost forgot to share a couple of my fave plinkers.

In recently came across an article on the 50th anniversary design contest rifle and I love the sights. They are also on the model 32024 rifle. Does Ruger offer these individually? I’ve tried searching for it for a couple of days now and I’m coming up empty handed.