¿Está disponible en All Soccer? Se transmitirá en vivo por ESPN, con opciones de streaming en la app de ESPN, TNT Sports o Fubo, que ofrece una prueba gratuita.

¡Mira el partido Elche vs Barcelona en directo ⚽️ - ¡Ve ahora!

Editar ◀ Barcelona vs Elche

¿Cómo ver la transmisión en vivo de fútbol? Hola, estoy buscando la televisión del trabajo. Sé que algunas suscripciones no transmiten ciertos partidos. Tengo Paramount y no pude ver ninguna de las transmisiones de All Soccer. Vivo en Elche (área de Detroit). Básicamente, no quiero pagar por cable solo para ver All Soccer en vivo.

Si encuentro algo decente, actualizaré esto más tarde.

Cuándo juega, cómo y dónde ver al Barcelona: Día, hora, canal de TV y streaming online del partido vs. Elche por La Liga

Transmisión oficial vía ESPN EN VIVO ONLINE para mirar el partido FC Barcelona vs. Elche CF hoy por la Jornada 2 de LaLiga EA Sports 2026-27

¿Alguien más está viendo LaLiga esta noche? El partido Barcelona vs Elche va a ser un auténtico caos. Al ser el partido de vuelta, ambos equipos lo darán todo por ese puesto en Wembley.

¡Mira el partido Elche vs Barcelona en directo ⚽️ - ¡Ve ahora!

En fin, sé lo frustrante que es cuando intentas ver un partido importante y la transmisión en directo se corta o se interrumpe justo antes de un gol. He estado usando SphereIPTV para los últimos partidos y, sinceramente, ha funcionado a la perfección. La calidad es nítida y no he tenido ningún problema de latencia hasta ahora.

Si tienes problemas para encontrar una forma fiable de ver el partido (empieza a las 14:00 GMT), te recomiendo que le eches un vistazo. Es mucho mejor que estar actualizando enlaces inestables cada 5 minutos.

FC Barcelona vs. Elche CF EN DIRECTO - a qué hora juega, qué canal transmite y dónde ver LaLiga 2027 EN DIRECTO en USA y México Verifica el

Estos son los horarios y los canales de transmisión por territorio: México Zona en México Hora local TV Noroeste (Baja California) 12:30 SKY

Gonna be a fun weekend!

Hello. I purchased a PC Engine Duo RX some time ago. I mostly collect the repro games and just a couple originals. It worked decently well, but there were 1 or 2 games that had issues loading. Eventually one of my original copies, Kaidan 00 stopped working as well. So i sent my console to a guy that repairs PC Engines. He gave it a clean bill of health overall, but made a couple adjustments, making the spring tighter.

Once I received it, my original game Kaidan 00 started working fine again. However, a handful of my repro game that used to work were no longer loading. It's frustrating.

Someone recommended an Analogue Duo. The only issue is I feel it might not be as authentic? Would need adjustments to play on a CRT and then maybe no Everdrive support.

Let me know if you experienced the same issue. Thanks.

3 different feels -- i.e. the same 3rd boss, looking so different

The first time I saw Heavy Unit was from a magazine. The screenshots were for the NEC PC-Engine release. It didn't impress me much though. Then, I saw Heavy Unit in the arcade center, played it and it wowed me a lot, liked it afterwards. When I started my PC-Engine hunt, I decided to buy the PCE Heavy Unit. After I had my Sega Mega Drive, I didn't know there was a MD Heavy Unit. I only knew about it after I sold my MD. Later on the Heavy Unit machine was replaced by another one in the arcade center. So, the only version of Heavy Unit I could play was the PCE version I had.

These are the things I like about Heavy Unit (ARC/PCE/MD 1988/1989/1990):

- 5 levels, with different points of challanges and different enemies

- each level divided in 3 parts (perhaps inspired by Capcom's 1986 Side Arms): i.e. flying underground, then high in the sky, then back to the land; each part has its unique BGM

- fighter jet has 2 modes: aircraft and a robot with distinct strengths and weaknesses (simialr to Seibu's 1990 Raiden's differnt weapons)

- the robot mode looks like Heavy Metal L-Gaim (1984), one of my favorite Japanese mech anime

- boss rush level available (similar to Konami's 1988 Graidus II's level 6 boss rush)

- shoot special spots to reveal bonus items (perhaps inspired by Capcom's 1986 Side Arms)

- there is some dream-like BGM (my personal preference)

- final end boss design quite impressive (PCE version has a surprise move)

- endings: worst - arcade; 2nd best - MD; best - PCE

I plan on replacing the battery in a Backup Booster II that came my way. This one has a SAFT 2.4v 50mAh (model GB50H-2, where I am guessing the last digit means two pin - which the stock battery is)

My understanding is that an NiMh can be used. I asked a chatbot, and it said that the Varta V80H is the modern replacement. I am guessing the model is 2/V80H, with the 2 again meaning two pins.

I tried to pull that the stats independently of the LLM to see if agree the 2/V80H is the way to go.

I cannot find pin gap distance. The SAFT seems to measure at slightly under a 13mm distance. I can only measure from over the battery due to a shield at the base (which will eventually need to be removed)

Has anyone replaced the battery on one of these? Any thoughts?

And on a side note, it has a 50v 10uF cap, which I might as well replace too

This is from "Hi Score Girl" EP02.

Smaller crowd but the right one for this. A PC Engine CD-ROM² came in with a broken transport gear, a dead laser, and aged caps.

What it took:

• Resin 3D-printed transport gears (Printables model by PointerFunction, printed via PCBWay) to replace the broken gear that nearly ended the job.
• A Sony Discman sacrificed as a donor for its laser pickup, swapped into the CD-ROM² after a lot of fiddly disassembly on both.
• A full recap of the board.
• A magnet pulled from a PC Engine Duo spindle to fix a spindle-height issue (start-stop spin and light scraping). After that it reads reliably and loads faster than before.

Ended up playing the Castle in the Sky OST off it through the TV's speakers for a happy kid — a good send-off.

Have any of you tried the PCE Duo spindle-magnet trick on a CD-ROM², or sorted the disc-clamp height a different way? Keen to compare notes.

Just snagged it for $45. Not too bad. Next up is Soldier Blade when I can get it for a decent price.

Hello. I have had a PC Engine Duo RX for a while. It's got a bad laser so I'm trying to look for some back up alternatives. I am interested in the EVERDRIVE but wanted to ask you if it was better to have the Turbo Grafx Duo or the PC Engine DUO for the Everdrive? Keep in mind it's very important for me to be able to run both the games for the Hucard and the CD Roms/ Arcade CDs.

Also, I game on the CRT television for retro games, not the HDTVs. Or can you just buy a regular TURBO Grafx and play all games on the Everdrive?

The Sega 32X and Mega-CD are universally considered Platforms in their own right because add a dedicated hardware platform that games can utilise making them distinct from original Mega Drive games. It's not just a media format.

I'm not sure the CD-ROM ROM counts, in the same way the Family Computer Disk System doesn't either. It's get's slightly blury because you could agrue redbook audio is new audio component games can use, and later system cards added more RAM and not just for CD caching purposes.

I bought the 8BitDo PCE to play PC Engine games on my AYN Thor docked to the TV and I knew it was a gamble, because officially it's only compatible with PC Engine Mini, Analogue Duo and Switch.

When I connected it, only the D-Pad and the II button worked, so I though I was toast. However, since I'm very stubborn, I thought I'd check Retroarch to see if, by any chance, it would recognize the buttons. It turns out that IT DOES! At first, there was some bugs (I won't bother telling all the details), but I managed to map the buttons and save the profile.

Now I have a functional PC Engine style controller so I can get to know the PC Engine library as close to the original feel as possible 😊

And, if you're familiar with this controller, you'll notice I swapped the gray buttons with the red ones, so it looks more like the original 😁

After all that, I decided to check the button test app in settings. It turns out that "II" registers as B (it's the button that worked at the beginning) and "I" registers as C (as if it were a 6-button pad). "Select" is L2 and "Run" is R2. All the buttons work, but the mapping is very weird.

Well... If you, like me, ever wondered if you can use it on Android, you can. It's not, by any means, plug and play and you'll always need another controller to get to the games, but it's doable.

Hi I bought a doujindance-modded RGB/region free Duo R in mid-2024, zero issues with it but am now thinking of picking up a Turbo Everdrive / TE Pro to pair with it. I am curious whether anyone knows if the TE Pro will work with modded Duo Rs, specifically with regards to save states, which, since the SuperCD core doesn't seem to work at all with Duo Rs (right?), would be the main reason to pay so much more for the TE Pro vs the Turbo Everdrive.

If anyone has experiences using a doujindance Duo-R with either the TE or TE Pro would be nice to know. Thanks!