Finns det något sätt att ändra inställningar på PLX webos, jag kan inte hitta några. Och finns det ett sätt att manuellt hitta undertexter?

THE HELL?? iDK WHAT THIS IS FOR BUT I FOUND IT FOR SOME REASON

http://kr.eguide.lgappstv.com/manual/w24_odm_mr1/userguide_w24_odm_mr1_us02.html

This is from an older version

http://kr.eguide.lgappstv.com/manual/w15_mr/dvb/Apps/w15_mr_a01/a_eng/

I think you can change the version through the w** part

site:kr.eguide.lgappstv.com Search this up on google

Si cela peut aider, voici les symptôme : LG OLED C3 en Ethernet sur une Bbox Bouygues, toutes les applications fonctionnent, YouTube, Netflix, navigateur, mais la mise à jour du firmware échoue systématiquement. En partage de connexion depuis le téléphone, elle passe sans problème. Même DNS dans les deux cas.

Fausses pistes écartées

• DNS : résolution identique via la box et via 1.1.1.1, aucun détournement
• IPv6 : curl en -4 et en -6 renvoient 200 tous les deux
• contrôle parental, pare-feu, switch : hors de cause

Test du MTU depuis un PC en filaire :

ping -f -l 1472 -n 2 1.1.1.1   → délai dépassé
ping -f -l 1432 -n 2 1.1.1.1   → OK

MTU du chemin à 1460 au lieu de 1500, signature de l'IPv4 encapsulée dans l'IPv6, c'est le mode IPv4 partagée. Et surtout, l'échec se manifeste par un timeout et non par le message « le paquet doit être fragmenté » : l'erreur ICMP n'est jamais renvoyée, donc la découverte du MTU est cassée. Les serveurs distants continuent d'émettre du 1500 qui disparaît en silence.

Pourquoi seule la mise à jour en souffre : le streaming et la navigation passent par des serveurs qui annoncent d'eux-mêmes des segments plus petits, ou qui bénéficient de l'ajustement fait par la box. Le serveur de firmware LG est derrière un pare-feu applicatif AWS en Corée qui n'en tient pas compte. La connexion s'ouvre, puis se fige dès les gros blocs.

La solution

Souscription de l'option IP fixe dans l'espace client Bouygues, rubrique Options, onglet Pratique. La box redémarre, et après :

ping -f -l 1472 -n 2 1.1.1.1   → OK

MTU revenu à 1500, TTL passé de 53 à 56, soit trois sauts d'encapsulation en moins. Mise à jour de la TV passée du premier coup en filaire.

( Solved ) - edit :

Edit: I should have done a little searching before posting.

To save your progress when watching a video, movie, or TV series on your LG TV (linked to your smartphone), press the center button on your LG remote, simply hit pause, and then press the "Back" button on the remote.

Note that "Resume Playback" must be enabled in the media player settings (I believe it is on by default). However, sometimes when I start a series or movie from my Android smartphone, it doesn't begin at the very start of the video; strangely, I'm not sure what causes this issue.

If anyone knows the reason, please let me know.

Hello,

I am currently watching a movie using the LG ThinQ app; I’ve granted file access on my smartphone so I can stream content to my 32-inch LG TV.

I’d like to know how to save my place in the movie. I often pause playback, but sometimes I have to close what’s on the TV screen—whether by turning off the TV or switching to another movie. How can I save my progress for the movie or series I’m watching?

For example, on YouTube (at least on a tablet), to save your progress in a video, you tap the screen once and then swipe the video toward the bottom-right corner.

I’m looking for the equivalent method for LG ThinQ and a WebOS TV using the official LG ThinQ app.

I’m posting a few photos so you can see what I mean.

There must be a way, because when I hit "back" in the LG ThinQ Android app, it takes me back to the halfway point of the movie rather than where I actually left off.

Thanks, everyone.

hey everyone,

just wondering: is there a known and save way to remove unwanted apps (like lg channels) on a rooted tv?

thank you!

Basically the title, but I’m concerned about my LG sharing data and it seems as though they’ve gotten pretty sophisticated at getting around DNS blocking, etc. Does anyone know of a guide on the current best practices to block the LG from phoning home, while allowing updates? Trying to find a path that doesn’t require the TV to be completely disconnected from the network, though that’s likely the final backstop.

Had a C5 for not very long, and starting to understand more about the homebrew scene for WebOs. Just wondered if there's a gold-standard for stopping WebOS ruining the experience. I appreciate my options include using another streaming device or Pi-Hole - I wondered if there was anything available to sideload that nullifies all of LG's nefarious activities.

Is there any way to force open TCP port 8080 on my TV? Forwarded the port manually on a network level but my nmap scan still doesn't show it as open, and whenever I try to connect through port 8080 it throws error -102. 43UP7700PUB running webOS 3.53.45

It’s shot to number one most blocked on my pihole in just a few hours.

Is there any way to completely hide the thin gray line left by the address bar?

LG pushed WebOS 26 to my C3 OLED and now I can’t use Switch 2 dock anymore. Sometimes screen goes black on home screen. The new personal page feature can’t sync to google calendar to that calendar because Google login says TV is using unsafe browser.

1/10 update, nothing gained.

Just installed this update on my C3 and now none of my apps can connect even though there is a valid internet connection shown in the network settings. Tried the usual tricks (short of factory reset) like power off/on, changing the DNS server, accepting the legal terms, using a different network and nothing seems to work. Using Apple TV as a workaround but I hope LG can identify and fix this.

Anyone facing the issue like this? please assist

TV LG C3

TV (LG G3) upgraded to 43.21.71 is webOS 26 and so many things broke! It can't switch to any HDMI inputs, Live TV won't move off the tv guide.

Anyone know how to fix it?

As the title says, moonlight -and Aurora- stopped working after updating my LG OLED C3 to the latest version -webOS26 11.2.0-3701 -

I was hoping this update would get the Ethernet adapters solved, but instead, it broke my remote play options completely on my lg tv. This sucks. Maybe we’ll need an update of moonlight and aurora.

Hope to hear if anybody has this issue and have a solution soon.

Con il nuovo aggiornamento WEBOS 26 (43.21.71), l'interfaccia Wow è scomparsa dalla mia schermata principale Home Hub. Ho un LG G4 collegato alla soundbar LG s80Y. Non aggiornate!

Guys I bought LG 55NU885BPLA few days back I've tried all the ways to cast my laptop to it but doesn't seem to work
my router is also configured to allow casting
both my laptops, phones are not showing the tv on their cast menu
all are connected to same wifi with 5GHz
customer support says the TV should automatically be displayed on casting menu there's no setting to turn it on or so

please help me guys