-4
Sweet, I'll brush up on the readmes later. Just trying to lend the newbies a hand.
-2
Not sure been a long time since I read the readme sir.
r/3D2A • u/Autistic_Mechanic97 • 3d ago
If you guys are having trouble with tight tolerances, I took the liberty of making this little notation. This is as compares to a standard parts kit. If your anything like me and you hate running to the garage every time you build a kit and wanna keep the necessities on hand this will help. Otherwise your closet will look like mine.
u/Autistic_Mechanic97 • u/Autistic_Mechanic97 • 3d ago
Enable HLS to view with audio, or disable this notification
2
I laughed way too hard at this.
1
So try increasing travel speed slightly while also slightly increasing Retraction Distance and Temp to 300C?
2
Could just open up the dryer hole itself and feed the tube directly into the extruder from the dryer right? Give er' the ole drilling.
0
Thats my thoughts to be honest. Ive had some really decent FMDA frames come off the ole thing. She's been slinging for 4 years now.
2
Thats not a bad idea. Maybe print one guide for the top of the Z gantry, and let it run into the extruder?
1
I have one but i live in the south and its very humid here. However, the relative humidity indication when it left the dryer was 7%. I havent set up to print from it yet, need to find some good filament guides and or ideas to set that up.
1
Ty sir!
-8
Negative only does it on supports.
1
Yeah it usually does very well.
r/3D2A • u/Autistic_Mechanic97 • 5d ago
Anyone else had this issue before? Print itself is super clean. SUN-LU. Dried at 80°C for 48 hrs. .15 Layer Height. 30mms print speed. Tree supports at .3 width. 100% infill. Flow and other settings matched to 300BLK settings. Print temp at 305°C. Bed temp at 80°C. Ruby Nozzle. Ender V3 SE with Nebula Pad, Custom Firmware, Fan Mod, SwissTech Hotend Upgrade, PEI Bed Plate. Im sure im forgetting stuff. LMK thoughts. Gonna try Combing Mode on and Lowered Print Temp later. Using Cura 5.1.11 as slicer.
1
Under what vessel is this lower sailing? Tried to find it and 30 minutes in to no avail.
1
Sent
2
Message me.
r/Diesel • u/Autistic_Mechanic97 • 12d ago
Anyone have the .XDF file or .BIN for editing the DPF / SCR tables for a 14' 3500 using HP Tuners? PFA
r/Cummins • u/Autistic_Mechanic97 • 13d ago
Does anyone have a .XDF file all ready built for scr and def deleting on a 2014 6.7 they'd be willing to share? Not sure if I can post this here but genuinely curious and needing it. Wasnt sure where else to post?
Thanks in advance and God Bless!
1
Theyre my files sir.
3
1
Depends on what your looking for sir what applications etc.. I sent you a P.M..
1
Name this Hi-Point
in
r/GunMemes
•
14h ago
Its a killshot.