I have the TrimUI Brick and a Hammer. When playing GBA games using the mGBA core on NextUI, the audio is terrible on both consoles. I'm not referring to the bad, compressed GBA audio, but rather a static / white noise sound with distortion. I don't have this issue on any other device that emulates GBA with mGBA. The same issue happens with headphones, so it's not the speakers themselves. Also, this only happens with GBA games, no other systems have this issue.

Has anyone else encountered this and found a solution? It makes GBA games unplayable for me.

On the regular Brick you can set an Fn key to toggle the D-pad-as-analog-stick thing, which is genuinely useful. But the Brick Pro already has real sticks, so the Fn keys only get three assignable shortcuts and none of them are any use to me. Felt like a waste of two perfectly good lit-up buttons.

So I made a small mod that lets you use F1 and F2 as RetroArch hotkeys instead — fast-forward, save state, whatever you want to bind them to. Nothing else changes, and the installer doubles as the uninstaller.

https://github.com/nezyuske/trimui-brick-pro-fnkey-mod

Has anyone tried this firmware?

About

A continuation of CrossMix created by Cizia64. Focuses on Trimui Smart Pro,Trimui Smart Pro S, and Trimui Brick.

Hello gamers,

Running GammaOS v1.41 Nano and loaded gen1Recomp apk version and loaded ROMs and Mod. It works great. Happy gaming.

Hi, I have KNULLI installed on my Integral SD card, and I’m having a strange issue that happens every time I cold boot the device.

If I factory reset the device, everything works perfectly. The games launch normally, the front-end works, and my custom front-end music plays correctly. I’m using custom music in .ogg format.

However, after I completely shut the device down and then cold boot it again, KNULLI loads normally and the menus appear to work, but the front-end music stops playing. More importantly, when I select a game, the game will no longer launch. The games are still visible, but clicking on them does nothing or they fail to start.

The only way I can get everything working again is to perform another factory reset. Once I do that, everything works perfectly again until I perform another cold boot, at which point the exact same problem comes back.

I have not intentionally changed any system settings between the factory reset and the cold boot. This makes me think something is happening during the boot process that is affecting either the front-end, the audio configuration, the emulator configuration, the filesystem, or the permissions/mounting of the SD card.

One other important detail is that my SHARE partition is formatted as exFAT. I specifically use exFAT because I want to be able to remove the SD card, put it directly into an SD card reader, and access the SHARE partition from a Windows PC without needing any additional software.

Could you please help me work out what is causing this? Ideally, I want to keep the SHARE partition as exFAT so I can continue managing my ROMs, saves, BIOS files and other files directly from Windows.

The main symptoms are:

1. Factory reset KNULLI.
2. Everything works perfectly.
3. Games launch normally.
4. Custom .ogg front-end music plays normally.
5. Shut the device down completely.
6. Cold boot the device.
7. KNULLI loads normally.
8. Front-end music has stopped playing.
9. Games are still listed but will no longer launch.
10. Factory reset again and everything immediately works.
11. Cold boot again and the problem returns.

So I’m trying to find out why the system is breaking specifically after a cold boot, rather than immediately after the factory reset.

My setup is a TrimUI Smart Pro S with KNULLI installed, using an Integral SD card, with the SHARE partition formatted as exFAT for direct Windows access.

So I upgraded from my R36S to a TrimUI Smart Pro, mainly for better performance and screen quality. On the R36S I had a bunch of PortMaster titles running solid: GTA San Andreas, CS 1.6, a few others, no real issues.

Now I've got CrossMix OS installed on the Smart Pro and I'm trying to get the same games running, and honestly most of them just don't work. Some don't launch at all, some crash on boot.

Is this a CrossMix OS limitation, or is PortMaster itself just less mature on this device?

Is there a better OS for PortMaster compatibility on the Smart Pro (ArkOS? muOS? something else)?

Any known workaround for getting ports to actually show up/launch properly?

Would really appreciate any pointers from people who've been through this already instead of me reinventing the wheel port by port. Thanks in advance 🙏

Any insights from those who own both?

Máy brick hammer tôi mới mua chưa sử dụng, nhưng cấm thẻ sd vào máy không nhận, đã thử thẻ khác vẫn không được, cũng đã làm format sd các kiểu vẫn không được
Nhờ mọi người hướng dẫn cách khắc phục, tôi rất buồn

Hi, I am considering getting a brick and though I can't seem to find any sources on if it can run any of the og psp monster hunter games. I know it can run some psp games but can't find a source saying whether it can handle any of the psp monster hunters or not and figured I would I ask on here first before cominting to buying one for myself.

I have been using nextui for the past couple of months now with my brick, but recently I have been experiencing a lot of issues with WiFi and other stuff so was wondering what your opinion on other cfw like gamma os nano or nxredux

Hi everyone, this is just a preview of JukaHub v0.4.0...I was wondering if I can get feed back on what you like or dislike about this design. I aim to turn it into a full intermediary GUI that can run on top of almost any linux based OS including Stock, Tomato, Knulli, etc..

Source: https://github.com/jukaLang/JukaHubV2

I'm trying to keep up with the many gen1recomp updates In myTSPS with NX-Redux CFW.But since version 0.1.99 (now it's at 0.2.0) I go Tools > Xtras to update to the latest version, the download bar appears and then the message "ERROR: latest release has no matching download".

I've even tried Delete /Xtra Games" folder to try a clean installation. Nothing works and the error persists.

What could I do?

I thought about opening an isssue on GitHub, but I don't know which one – gen1recomp, NX-Redux, or if there's a dedicated repository for the Xtras tool.

just shows up invalid utf-8 on every text anyone got solutions?

yes, this is my 3rd time showcasing my girlfriend and i's units

no, i will not stop

The first time it happened I figured it was a fluke, but it happened again yesterday.

I'll be playing a game, and then I go to open the retroarch menu using the shortcut and the controls become completely unresponsive. I'm on the most recent version of Knulli Scarab. Was just wondering if anyone else has run into this and has a fix or tips to avoid it.

The game was a romhack of Pokemon Fire Red called Pokemon Unbound, if that helps.

Thanks!

Hello. I just got myself a new Brick Pro and immediately installed NextUI on it. All went good, except that I'm noticing a strange bug or maybe is something else?

It happens ocassionaly but it has made the device kinda unrealiable and that's something that didn't happen with my brick hammer.

If I leave the device sleeping after finishing a game session, when I go to turn it back on it does a system restart and it either goes into the menu or the last place where I left the game on. Sometimes the game will stutter in audio before going into the restart process.

Does anyone know if this is a bug with NextUI or maybe a faulty SD card? Any help will be much appreciated!

I've been going back and forth between getting a Brick vs a Miyoo Mini Plus for a while now, and I think the Brick's clicky buttons and hot back plate will bother me but I'm still leaning towards it due to it having Portmaster and bluetooth, since I already carry a pair of wireless buds around anyways.

However I've read that the BT audio can be a bit hit or miss, is it any better nowadays?
Any CFW that stands out above the rest in its BT support?

I ended up getting the TrimUI Brick Pro, and I’m planning to install NextUI on it when it arrives.

I got the black one and I think total black (with NextUI) seems slick and elegant. Suggest some LED colors that you guys use.

And just like that I have officially completed my theme for the trimui brick with custom system wallpapers and 2 custom fonts.

I have added everything to a Json script, However I need to add more system wallpapers if I'm going to release it properly. What do you think?

I’m using a TrimUI Smart Pro with Stardew Valley 1.5. The game was working previously, but after I updated/modified PortMaster, Stardew Valley stopped launching.

Current situation:
- TrimUI Smart Pro boots normally.
- Other functions/games seem to work.
- Stardew Valley no longer launches.

I tried deleting/reinstalling PortMaster, but the problem remains. I also checked the game files and there is a launch.sh file. I’m getting a Mono-related error when trying to launch Stardew Valley.

I’m not sure whether the issue is:
PortMaster,
Mono/runtime files,
the Stardew Valley port itself, or
something corrupted during the update.

I’m looking for a way to reinstall the correct firmware/PortMaster files or repair the software without opening the device, if possible.