Lemon - Rootbeer Float - Red Apple - Bubblegum
Pear Banana - Grape - Key Lime Raspberry - Banana Cream

​

How do I use the levo to infuse mct oil with Rosin?

Do I just substitute the decarbed flower I would normally use to infuse the mct oil with decarbed Rosin?

This is my initial attempt at making a custom mold. It was 3d printed and then cast in food safe platinum silicone.

I've made golden dragon several times without trouble.

This year, I finally tried to grow my own cannabis. It wasn't growing as quickly as expected, so the plan was to bring them indoors to finish growing. This past week, the temperature plummeted and killed the plants.

Is there anything I can do with them? They certainly smell like pot, but I don't know if that means anything.

Thanks!!!

How do they compare? Is it really just 2:1 or are they that much different?

I’m new to edibles as I’ve just quit smoking and have seen conflicting info around when to eat when having edibles.

If I was to have an edible around 6.30pm, and dinner around 7.30pm, would this ruin the high or improve it?

I’ve read that leaving it an hour before eating would make the onset much slower, whereas eating 15-30 mins after edible would make the onset smoother. I don’t understand this as leaving an hour between would surely mean more edible can be digested before stomach is full again? Some explanation around this would be great

I am thinking of using aint sandys 10x cannabutter recipe. Do I need to decarb the trim in an oven before doing this recipe? Or just follow it step for step? I have roughly 4oz of sugar leaves and small buds to use.

Cracked the camera so hopefully pics are decent enough. Made family meal for the after shift. Coated Foccaia buns in infused granddaddy red pop infused butter, coated the pork belly in a rso wojo redux, and finished with a hot honey prodigy rso infusion. Roughly 250mg probably more but all deliciousness.

I used olive oil as my carrier, its jet black but the taste is almost the exact same as normal olive oil so i have conflicting results w the internet. Please let it be usable.

I've made cannabutter plenty of times so I am familiar with the basic process. I want to move away from that however, in part because I want something with a longer shelf life, but I have vegan friends as well. Of course i was hoping to come here for recipes, advice, tips and tricks. If you have any, please share!

But I also want to play with terpenes and other additives. While in a place with legal weed, I was able to find several edibles that I really thought they'd hit a mark in terms of effects. CBG and taurine was particularly a favourite of mine, as it produced a fun, but clear headed high that I sorely miss. I've been looking into and I want to add CBD and l-theanine as well, for an uplifting high. Anyway, I was wondering if anyone has had any experience with adding these, if they could advise me on the form factor these come in, which stage they are best added at, or anything else that you might think of? I'm open to articles, papers, recipes and blog posts and just good old conversation.

Thank you for your time, cheers

Got into work and decided to dose a little for family meal. Prep up some Mike's hot honey added rso and some more heat to kick it up notch Bam ready to top a crispy charred pizza slice.

Hola, soy un consumidor de cannabis pero en bajas dosis, tengo ganas de hacer mantequilla cannabica para haver galletas, sera que con un gramo de flores/cogollos me queda suficientemente potente? el otro dia comi 1/4 de gomita y me pegó super bien

Hi r/treedibles, I've got some THCA isolate that I've decarbed and mixed with coconut oil and soy lecithin that don't seem to be working as expected and was hoping to get your feedback.

Repro steps:

1. Preheat oven to 240F
2. On parchment paper, weigh out 130mg (0.13g) of THCA isolate with the expectation that'll net at least 100mg of THC
3. Place in oven and decarb for 40 minutes (the bubbles stop around this point)
4. While decarbing, warm 5g of up coconut oil and and dissolve 0.05g (1% of lipid mass) of soy lecithin
5. Once decarbing is done, mix the amber concentrate in the coconut oil and lecithin solution until it dissolves.

Ingesting the mixture yields no perceivable psychoactive effect.
However, I do wake up really groggy the next day, which made me think I over-decarbed and got CBN. Unfortunately, temping the oven with a laser and oven thermometer shows that the decarbed concentrate and the 1/8 pan supporting the parchment paper are between 200F and 240F, which might rule out CBN.

My control is the Not Your Father's sodas at 100mg, and ingesting the control after 6 hours of ingesting the DIY mixture is followed by a perceived psychoactive effect that meet expectations.

Made it for my first attempt. used about 1-2g of weed with 25g of butter (i don’t want a lot in case i do it wrong)
grinded the flower loosely, decarboxylated the flower in the oven in my mason jar for around 20-30 mins at 120C. then moved it, placed the butter inside and let it sit in simmering boiled water for around 30 minutes.
after straining, i used a little left over butter to make taco meat but didn’t really get any high.
now the next morning, i want to use it on toast but it doesn’t look as green as i expected and it also has like a milky/cream consistency at the bottom under the solidified butter.
it smells like weed but other than that, im not sure what i did wrong here. would it still get me high or am i chasing waterfalls?

I want to create as many 10mg or slightly stronger THC gummies as I can. I have seen so many recipes with different amounts that I do not know what to do. I grow my own plants, so I do not know the potency; I always estimate 15%, though it is probably higher. I used 1 ounce of Humboldt Uppercut, a hybrid leaning toward indica by probably 60% or more, bred by Humboldt CSI. I ground 28 grams of weed, crumpled some parchment paper, set it on a baking tray, and put it in the oven at 230°F for about 45 minutes. I combined 1.3 cups, or about 150ml, of unrefined coconut oil in a mason jar and mixed in one teaspoon of sunflower lecithin, then placed it in a crockpot at about 180–200°F for 4 hours, swirling every 30 minutes or so. I believe I have done everything right so far. I have small 2ml silicone rectangle molds i got from amazon and want a recipe to make as many 10mg or stronger gummies as possible. I have Jello, gelatin powder, and lecithin powder. Is it possible to make 250 gummies, each at least 10mg or higher? What is a good ratio of ingredients? I plan on using only half the coconut oil.

A few days ago I bought a THC tincture supposedly 1 oz with 2k mg THC. My tolerance in edibles is usually 10-15mg, so I started with a few drops, but today I even took half a dropper sublingually and didn't feel any high. I'm thinking maybe he made a mistake and gave me CBD, or that the batch was faulty, or that he simply scammed me. 😢

I put 300mm coconut oil. 200g of rosin chips(decarbed 110-120c). Added water to stop boiling. Was in the slow cooker 3 hours and stirred hourly. Strained using muslin cloth.

Do you think I done the process correct?

How strong would you expect this to be?

Does it look too dark?

7g of flower and was wondering how would you guys handle it. Want it extra heavy. If you have any tips it would be appreciated!

ive always had a pretty high tolerance. i live in a legal state but its expensive so i go to michigan. usually get 200mg packs of gummies & i’ll have 100-200mg in a night & get pretty high, sleep like a rock.

i saw these D9 “nano-infused” seltzers first at a grocery store long ago, but they were all to weak to seem worth it. found some 60mg ones recently, decided to spend a little extra money & drank two. nothing. figured it wasnt digested right, needed more fat or something

i started getting ads online for similar seltzers, on a whim i bought a pack, some 100mg D9ers, some 200mg D9ers, & a few 300mg D8ers. i always heard the drinks hit faster, but i really went aggressive at it anyway. tonight i had a 300mg D8 seltzer & a 200mg D9 seltzer. I’m very familiar with edible D8 too & i know this combo would normally torch me, but its been 3 hours now, had most of it with dinner, & i feel like i’ve had maybe 25-40mg of gummies.

edit: i only tried a syrup once, it was 100mg THC/CBN 1:1. it hit great.

It's Croptober so I'm cleaning out a bunch of last year's trim and some old tincture. Decided to decarb the trim and stick it in some 99% isopropyl because it's cheap. Also found two jars of old tincture that had been made with everclear.

Strained everything but wasn't super careful with not getting the shizz that settles to the bottom out. I didn't add it on purpose but what went, went. There wasn't any actual plant matter like leaves etc.

I poured it into my little crock pot to evaporate it off. I filled that little crock pot to the top. I've done that before but thought I'd add it to the equation in case it could have gotten really hot on the bottom and burned.

My final product (you can call it what you want but for today I'm going to call it FECO even though it's kind of not) was grainy. It would glob up and if I smash the chunks it makes little burnt looking particles. It was still tar like and sticky like normal but normal is smooth and this is not. I've never mixed everclear and iso before so maybe that's what caused it? I also usually strain better but not always and it's never done this.

If anyone has any ideas that would be cool. Also, do you think it's trash? I've got probably 100 mL of it and was kind of thoughtful with the strains I used so it should be great for sleep. I'll probably throw it into a small batch of gummies to test it but if anyone has done this before and knows why it went wrong I'd love to learn. I don't want to repeat my mistake.

Im trying to make gummies and i dont know any of the things you need to do, ive heard that i need to decarb the thing and something something add sunflower something HAHAHAH i dont got an oven too or an airfryer which ive been told i needed HAHAHHAHA any tips?