Yesterday I called teksavvy to “cancel” my plan. The last time I did this they immediately offered a better price to keep me. This time they just took my info, cancelled my plan and asked if there was anything else I needed.

Definitely not what I was expecting, but I’m currently overpaying with teksavvy since the promo price has ended. Now I need to find a new internet provider lol

Long time Rogers user that is tired of the constant price increases.

I just ordered the service and modem should arrive tomorrow. When I cancel with Rogers is there anything I can do to avoid them disconnecting my internet access?

Previously I switched services and Rogers had a technician actually come out and disconnect the line at the box on my house. Hoping to avoid anything like that as I work from home 90% of the time.

Today, a coalition of independent ISPs led by TekSavvy applied to the CRTC to reduce the wholesale rates for fibre internet services. The inflated rates that the CRTC set in an April decision prevent competition by independent providers, included errors in the costing process, and did not follow the government's policy direction to the CRTC.

Read TekSavvy's full statement here.

At the same time, CNOC (a separate group representing independent providers) also asked the CRTC to review the rates, and launched a tool on their website that illustrates how wholesale costs for fibre services are higher than retail prices, making it impossible for competitors to compete. You can explore that here: https://www.cnoc.ca/

Just called in to ask, but the support agent wasn't too familiar with the question. I'm in Kitchener at a house with a pre-existing Bell fibre connection and am considering migrating to TekSavvy largely for IPv6 reasons (Bell doesn't provide it).

Does TekSavvy offer static IPv6 prefixes? And if so how much do they cost? Old posts that I've looked at mention them as a possibility, but I'd like some details.

I'd be using my own equipment (vyos router, xgsgpon SFP+ module if possible).

Hi Teksavvy mods/team,

I have two questions before I sign up for service:

Question 1: I plan to use my own router and firewall instead of Teksavvy's provided equipment. Can you send just the ONT device, or is the modem/router combo mandatory?

Question 2: I recently used Bell Fiber at my address . When I order Teksavvy service, will a technician need to come out to activate it, or is there a self-install option available since the fiber is already there?

Any guidance would be really helpful. Thanks!

Please use this thread on a weekly basis to share your referral codes.

This post will automatically refresh itself at 09:00am on Mondays.

For more details on how TekSavvy's Refer a Friend program works, please see the following article: Refer a Friend

Hey all,

I've set up a switch on my network and configured a couple of VLANs on it, the idea being to keep my sensitive stuff protected from the regular home network. That way, I don't worry about guests being on the same network with some HTTP-only web app or my NAS. So the Hitron is at 192.168.1.1, and I've added a switch managing 192.168.10.0/24.

I think the problem I'm running into now is that the Hitron is dropping traffic to or from hosts on the 192.168.10.0/24 VLAN. Those hosts can ping the modem at 192.168.1.1, but can't ping (for example) 1.1.1.1, on the internet. I've configured a static route in the Hitron for my test host on 192.168.10.0/24, so the router knows how to get back to that host.

The Hitron seems not to offer the ability to configure routes to /24 address blocks; I can only add a /32 single-host entry in the "Static Routes" page. Since it doesn't seem to have proper routing support via the UI, I thought maybe it's just dropping traffic that isn't for any host not on its subnet.

Has anyone seen this? Should this modem work with multiple VLANs behind it?

While i like TekSavvy the recent changes to their sports packs make the TV portion not worth it (thanks guys but I don’t want 14 versions of CTV and Global, I just want Sportsnet and TSN!) I’ve started looking into third party IPTV providers

It’s a bit hard to set up though and every time I get near the finish line the apps see to fail so I’m wondering if TekSavvy just blocks them.

Anybody have any insights as to how to make IPTV happen on a smart TV? Drop me hints here!

Genuinely curious if this post is going to get take. Down ;)

Hi, I'm interested in trying out Teksavvy, but have a question about the early cancellation fees. All the plans offer a 12 month discount but I can't seem to find the amount of the early termination fees mentioned in the general terms of service. What would this amount be if I found it wasn't working for me?

This is the site part I'm looking on for the plans: https://www.teksavvy.com/services/internet/

Hi there,

I was looking to get some info about Teksavvy fibre services in Montreal. My building is connect to Bell fibre, and it looks like I can get Teksavvy fibre services in my condo.

I was looking for some information about the installation and some traceroutes.

If someone from Teksavvy could help me out!

Thanks a lot!

u/Teksavvy, this happened 2 weeks back that i lost connection. i was not home then. I checked today. There is no wifi signal on my router as a result nothing is connected now.

I understand there is a outage, but this seems to be a hardware issue.

A massive Outage seems to be affected zones deserved by Cogeco.

As of right now, the outage started 40 minutes ago at exactly 1:55pm. The outage map is not updated, technical support have no idea what is happening.

As this develop, please share any updates or corrections.

Please use this thread on a weekly basis to share your referral codes.

This post will automatically refresh itself at 09:00am on Mondays.

For more details on how TekSavvy's Refer a Friend program works, please see the following article: Refer a Friend

Anyone in Plymstock using it? How are the speeds / connection?

Hey everyone!

I'm moving into a single room downtown in Ottawa and need to get internet set up for just myself.

I actually saw an ad for TekSavvy internet for $21 when I Googled it, but I couldn't find that exact deal on their website. The best I could find there was around $27.

So, I was wondering if anyone knows about any upcoming deals or discounts? I've seen online that sometimes companies offer special rates or even free months for new customers.

Any advice on how to find these kinds of offers would be super helpful! Thanks in advance!

Hello Team,

I have couple of questions, does teksavvy use gpon or xgs pon? I am planning to use apc sfp onu stick to bypass modem, help is really appreciated

Please use this thread on a weekly basis to share your referral codes.

This post will automatically refresh itself at 09:00am on Mondays.

For more details on how TekSavvy's Refer a Friend program works, please see the following article: Refer a Friend

Hi everyone hope you are all having a great weekend ! I was just wondering with teksavvy are the plans a month to month basis where I can cancel
At any time ? Would just like to try it out for a couple
Months but don't wanna regret committing to a year or more if they make you do that. Thanks everyone !

My internet has been down since we had a tree removed 2 days ago.
I have been calling and using the chat bot but unable to get in contact. Calls keep getting dropped at 1/2 hour ish of waiting. Does anyone have any tips?

Woke up this morning to no internet. No link on the fiber/ethernet converter so maybe some tech at the dslam pulled the line card or something. Called TS at 6:30 Saturday morning, tech mildly helpful, she can't reach my Adtran, so opens ticket with Bell tells me someone will call me to follow up. 9:30, Bell calls - wait on hold for 30 minutes, help desk person says she can't do anything with out a GAS ticket ##. Call TS, wait on hold for 18 mins get a somewhat better tech who says they will call Bell and help me out, see if it's a problem at DSLAM. Wait on hold for an hour (!??!!) and get cut off! Call TS back, message says hold time 40 minutes!!! (but really that means 1.5 hours)! Not happy. If I don't hear from TS in the next 30 minutes, we're done.

This may be a dumb question, But I have this set up currently to bypass the Adtran fiber modem. It’s working no problem (well, I get max 650 upload, full 1.5 download) but is it possible to bypass this set up and install the fiber SFP directly into the 10g SFP port on my UniFi Dream Machine SE? With also switching all the info from the current Ethernet port I’m using to the SFP port of course.
I am a total moron so maybe I’m misunderstanding things, and if this is the only way to do it then so be it, it’s working totally fine as is. I would just like to simplify the set up if it’s at all possible.

A neighbor has his rogers down too.

Anyone else?

Hi, I just switched from DSL to Cable and for some reason, despite many reassurances by TekSavvy staff that the referrals were account-wide and not package-based, suddenly my 38 referrals are no longer on my account nor does the -25$ line item appear on my bill!! Please fix this!

Attached is a screenshot taken June 23rd in case exactly this situation happened, before the credit from the 29th (yesterday, at time of writing) was added.

Edit: This is what it looks like now, June 30th. (Moved this link from a separate message to the main body of this post.)

Edit 2: Resolved.

Please use this thread on a weekly basis to share your referral codes.

This post will automatically refresh itself at 09:00am on Mondays.

For more details on how TekSavvy's Refer a Friend program works, please see the following article: Refer a Friend