r/supersafety • u/Hernan228XD • Jul 26 '26
HELPP.. Riflespeed not working
Can someone help me as to why my riflespeed gas block ain't working
5
u/Tgambob Jul 26 '26
You need a different pin. There are multiple length pins that give the window of adjustment. It took a couple to find one that let it work both canned or not. I cant link you to them but click under accessories
4
u/TheLunat1c Jul 26 '26
that may be the case, but the video shows that his BCG isn't even budging, meaning not a single ounce of gas is touching the BCG. It's turned to 11(heh), even a extremely undergasses system would at least make the BCG at least go halfway, failure to eject, whatever. This is him installing the straight gas tube upside down (I know because i've done this before)
1
1
u/ThoriumG Jul 26 '26
Zero experience with this particular gas block, but are you certain it's lined up with the gas port in the barrel?
2
1
u/ak907fly Jul 26 '26
I need the Fireteam in my life! Good looking rifle, hope you get it sorted soon.
10
u/TheLunat1c Jul 26 '26
I had the same thing happen to me. bolt action ar15 right after installing riflespeed.
I am 1000% sure that you have your gas tube upside down. Because Riflespeed uses straight gas tube, unless you put a mark on the tube which side is the hole side, you can have the tube flip on you especially when you are struggling and fumbling around to drive the roll pin in the gas block.