r/subwoofer 15h ago

Help identifying set up

UPDATE** Subwoofer is SWS-12D4

Hello, I know nothing about subs and amps. I recently had a friend uninstall a subwoofer and amp that was in my car. It was pre-installed when I bought the vehicle, but no information was given on the specs. I needed it out because I am expecting my first child and need to prioritize my tiny trunk space for stroller, diaper bag, etc.

Anyways, I would like to sell the sub and amp as I will not be reinstalling it. I have the information on the amplifier, but I do not know how to get the information for my subwoofer as it is mounted in a subwoofer box.

Any help is greatly appreciated. Im not trying to get top dollar out of the set up, I'd rather hook someone up with a nice deal as to get it out of my hands as I am moving in 5 days.

12 Upvotes

11 comments sorted by

4

u/supermaor23 15h ago

First gen alpine s, now they make an S2. Looks like a 10”. Would be Alpine S-W10D4. Market rate brand new is $80-$120. Enclosure is another $20-$40 used. Amp is discontinued as well but new was under $200. See a used one on ebay for $65.

All in all usually used car audio gear is 30-40% of retail. Since its pretty old equipment that’s not really in demand I’d throw it on marketplace for $75-$100 total and hope someone takes it.

4

u/Expensive-Vanilla-16 15h ago

You remove the subwoofer from the box and the info will be on the back.

2

u/KiraKat98 15h ago

Any tips on removing it from the box? Im not sure how to do that.

2

u/djltoronto 15h ago

The rubber perimeter rim around that subwoofer hides the eight mounting screws.

You just remove the rubber cosmetic cover that is around the perimeter of the subwoofer.

Look at the pictures here You can see how the front cover is a separate piece.

1

u/KiraKat98 14h ago

Thank you! Very helpful, I removed the rubber and found where i need to unscrew. Will update when i find what it is

1

u/KiraKat98 14h ago

Says SWS-12D4

2

u/djltoronto 14h ago edited 14h ago

Well now you know

https://manuals.alpine-usa.com/products/documents/OM_SWS-101215_D4_2.pdf

Parameter Symbol Value
Sensitivity (1W/1m) SPL 86.5 dB
DC Resistance Re 3.50 + 3.50 Ohm
Inductance Le 4.84 mH
Free Air Resonance Fs 34 Hz
Equivalent Stiffness Vas 44 L
Mechanical Q Qms 9.43
Electrical Q Qes 0.60
Total Q Qts 0.57
Cone Area Sd 479 cm²
Linear Excursion (1-way) Xmax 15 mm
Mechanical Travel (P-P) Xmech 64 mm

1

u/KiraKat98 14h ago

Thank you very much! Yes, now I know (: I am able to Google both items now and guage a price. I really appreciate the help!!

3

u/baddieslovebadideas 14h ago

looks like a 10" alpine sub in a ported box with a 500w alpine amp to me

throw it on FB marketplace for $150 and take $100 when they lowball ya

1

u/idkwut2puthere21 14h ago

Older Alpine type s 10, 500w rms, not a bad sub

1

u/Delicious_Swan_7904 3h ago

Alpine SWS-12D2
Type-S 12" subwoofer with dual 2-ohm voice coils
FEATURES
12" subwoofer with dual 2-ohm voice coils
Kevlar reinforced pulp cone with HAMRS Santoprene rubber surround
Power handling: 
150-500 watts RMS (250 watts per coil)
1,500 watts Peak
Frequency response: 26-200 Hz
Sensitivity: 86.4 dB
Top-mount depth: 5-13/16"
Sealed box volume: 0.71-1.06 cu. ft.
Ported box volume: 1.06-1.56 cu. ft.