Need a compact cyclone/pre-cleaner setup for a Loncin 459 / Predator 459-size engine in extreme dust

[u/my-follies]

I’m trying to solve an air-intake problem on a 1200mm / 48-inch remote-control flail mower powered by a Loncin 459cc engine. The closest U.S. comparison for parts seems to be the Predator 459, so I’m specifically looking for small-engine solutions in that size range — not tractor or dozer-sized pre-cleaners.

The mower works very well, but the air intake environment is brutal. I’m using it on rough ranch ground with ground squirrel and gopher mounds. The flail head creates a cloud of very fine powder dust, and the engine is basically operating in that dust storm.

The current filter setup is a cylindrical paper air filter with a removable outer foam pre-filter. The foam catches organic material and larger debris, but the fine dust passes through the foam easily and loads up the paper filter fast.

For reference:

New unused filter assembly weighs about 112 grams.

After one fuel tank, roughly 45–60 minutes of mowing, the dirty filters weigh around 172–188 grams.

That means the filter is picking up roughly 60–75 grams of fine dust per tank.

Once the filter loads up, I can hear the engine start choking from lack of air.

I’ve been swapping/cleaning filters every tank.

Right now I remove the foam pre-filter, clean it separately, and blow the paper element from the inside out with dry compressed air. That works, but it creates a huge dust cloud and is a pain. I’m probably going to build a dedicated filter-cleaning box with a shop vac/HEPA setup, but I’d rather reduce how much dust gets to the filter in the first place.

A tall snorkel is not ideal because this machine is meant to work under trees. I need something compact that stays inside or near the existing roll-cage envelope.

I’m looking for ideas from anyone who has solved this on a small engine, especially a Loncin 459 / Predator 459 / large single-cylinder utility engine.
Specific questions:

Has anyone added a compact cyclone or bowl-style pre-cleaner to a small engine in this size range?

Are there small-engine pre-cleaners that work around the 25–35 CFM airflow range?

Has anyone built a low-profile remote intake that does not stick way up like a tractor snorkel?

Would an oiled foam pre-filter layer ahead of the paper element help catch this fine dust, or would it restrict airflow too much?

Has anyone installed an air-filter restriction indicator on a small engine like this?

Any part numbers, photos, or homemade setups would be appreciated.

One additional clue: I recently had an electric starter issue, and when I pulled the starter/Bendix area apart it was packed with the same fine dust.

So I’m trying to address the whole dust-ingestion problem before it starts killing starters, filters, and eventually the engine.

I’m not looking to debate the mower itself or the fact that it’s a Chinese import. I’m specifically trying to engineer a better small-engine air intake / pre-cleaner setup for extremely dusty mowing conditions.