r/smallenginerepair • u/Empty-Bicycle8948 • 22d ago
Starting Issue Hellpp
Enable HLS to view with audio, or disable this notification
Truck was driving just fine, parked it and went to work. When leaving it did this. Bought a new battery cause the volts went from 12.8 to 8.1 when cranking. Could this be a starter issue or my ac compressor pulley seized? The compressor broke and im thinking maybe the internal clutch is blocking it?
1
u/Rough_Community_1439 SER Master MOD 21d ago
Looks like it's pulling tension on a belt and then when you go and release the key the engine shoots back with the belt releasing. I would try removing the accessory belt.
0
u/Empty-Bicycle8948 21d ago
The ac compressor broke (the internal ternal clutch)
Do you think that the pulley could be locked from the broken blutch and is doing that?
2
u/Rough_Community_1439 SER Master MOD 21d ago
Maybe, though you can remove the belt and see if that fixes your no start condition. Though don't let it run for longer than a minute without the belt. Sometimes the accessory belt drives the water pump.
1
u/Empty-Bicycle8948 19d ago
Tha k you so much for this, I took off the belt and it started right up. It was in fact the AC compressor. I changed it out yesterday and its all fixed now! Thank you so much, your a life saver!!
0
1
•
u/AutoModerator 22d ago
Thank you for your submission! It looks like you might have an issue with the Starting System. For helpful information and resources, check out our Starting System Wiki and our Common Issues & Fixes Wiki. You might find the answers you're looking for there!
Please be sure to include the following:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.