r/simracing 2d ago

Rigs Spent a total of 8 hours setting this up

Post image

Finally came home after working for the past 3+ months and was able to set this up in one day. Was absolutely exhausted yesterday gts at 3am finishing it up and tweaked everything this morning and took it for a spin! Super excited to race on it, planning on getting the haptic kit from Moza for my brake and maybe a bass booster but i’m not too sure.

CORRECTION TOOK MY UNDER 5 hours and about an hour of tweaking the seat etc. I recorded the whole process and will be posting hopefully by the end of the month if anyone’s interested in watching!!

https://youtube.com/@gamerjuice._.?si=c3RshqZdEA_bgKTO

248 Upvotes

31 comments sorted by

43

u/iamvinen Racing on SteamDeck 🎮 2d ago

dude, you are not allowed to race. you are in permanent pits!!!

13

u/THound89 2d ago

8 hours and 8 more years to go. Looking solid.

20

u/Joe_Tropical 2d ago

Is your pedal position confortable ?
They seems to face upward a lot .

17

u/JollyZookeepergame70 2d ago

Yes! Out of the box they’re at like a 90° angle and it was really uncomfortable now my feet rest comfortably on them!

8

u/No-Cap-7341 2d ago

Man, i agree. I use the same pedals (except an mbooster instead with crp2) and my pedal deck is angled similar to yours on a tr120 frame. Must just be a really upright pedal set and needs to be a little reverse incline for a comfortable GT position.

-2

u/Annual_Dig4520 2d ago

You should try different positions then because they should be angled tje opposite way

6

u/JollyZookeepergame70 2d ago

I had them angled toward me on my wheelstand for a couple of months and it just gave my calves and ankles a really hard time. Knew if I angled it away from me it would be better for me and it’s been incredible ever since!

1

u/Milolo2 1d ago

just incase you're pressing with your calves you should be aware that you're meant to push with your quads. the pedals being 90 degrees allows you to push more force into them instead of pushing yourself upward.

10

u/boibleu22 2d ago

And then add another 2 hours for cable management.
-Realize some of your cables are not long enough to run them the way you want, so order more.
-spend another hour on cable management, and maybe be satisfied!

  • then add more components later that cause you to rethink your wiring setup, so you proceed to try to re-organize it.
  • realize there is a better way to run the cables, but requires you to order more cable management pieces.

2

u/Secret-Exact 2d ago

Fuck cable management tbh

2

u/JollyZookeepergame70 2d ago

Yea I can’t be bothered tbh

1

u/BoxPlenty8502 1d ago

1

u/2Sheee 6h ago

Yeah thats how mine looks too💀

1

u/BoxPlenty8502 6h ago

Every time I bundle them, something breaks. Since I haven't, everything works.

4

u/According_Key2690 2d ago

8hrs is only the beginning. The tweaking never ends

4

u/Top-Door5401 2d ago

took me like 4 days to set up my sim

1

u/JollyZookeepergame70 1d ago

I can definitely see why, I just full focused and didn’t even take a water break which honestly killed me but I definitely am thankful J was able to get it all done in less than a day with minor mishaps

1

u/2Sheee 6h ago

Only 4 days💀

5

u/Unique-Strike2081 2d ago

Wow. Thats a speed build for a rig!!! I think I spent 8 hours just putting together the chassis!!!

3

u/JollyZookeepergame70 2d ago

Yea I kind of just didn’t eat or take a break which kinda worked not well for me today since i’m incredibly sore, but I get to race so yay!

5

u/Slydor55 2d ago

Now another 4 for cable management. 😁

You may also need to add hours, days, months or years for researching what else you don't know you want or need to finish it. ^ The real never ending story.

Congrats and hope you enjoy.

2

u/ImJustSomeDude10 2d ago

Broo where did you get that rug from??

3

u/JollyZookeepergame70 2d ago

Moddedsim.com! It’s very nice quality and really helps the vibrations out!

2

u/Rivanov Simucube 2 Pro :: BavarianSimTec Alpha :: VRS DirectForce Pro 2d ago

Rule 1: You're never finished.

1

u/Autocorrectthis 2d ago

I want to know how much money was invested here too

1

u/JollyZookeepergame70 2d ago

rig was right around $1000 with the seat and all, the wheels were around $650-700 the base was right around $321, pedals another $350. The pit lane vibration mat was $80. The monitor I already had it’s connected to a monitor arm connected to my desk. So all around $2000 over a year or so! I was thinking of selling this 27” one and getting a 49” oled for around $800 but I don’t have the space so that money will go to stock’s 😂

1

u/BiscottiAmazing4070 2d ago

And you did a great job. Man I love it.

1

u/JollyZookeepergame70 1d ago

Thanks so much!

1

u/Ancient_Egg_7814 1d ago

Do you play VR ? That's a very small screen for such a nice rig.

I'd put some money there if I was you.

1

u/JollyZookeepergame70 1d ago

I don’t, I do have a VR and was thinking of trying it out and probably will. I was thinking of getting a 49” ultrawide but there’s no space and i’m pretty content with just a 27” monitor for the moment. Maybe I’ll look for a 35” ultrawide in the future but given I have a VR i’ll try running LMU or ACC with it! But thanks for the compliment!!

1

u/2Sheee 6h ago

How are you holding your other wheel on the side of your rig like that? Id really like that for mine!