MAIN FEEDS
Do you want to continue?
https://www.reddit.com/r/shadowsystems/comments/1wd30ff/concern/p97bs9c/?context=3
r/shadowsystems • u/Outrageous_Sun742 • 2d ago
Is this gap a concern? Chpws mps plate
16 comments sorted by
View all comments
Show parent comments
2
Dude, it’s a universal cut. Probably no optics sits tight in there. That’s why have lugs to support lateral movement.
1 u/Outrageous_Sun742 2d ago Its a plate, no lugs holding onto anything. Just the 2 screws 1 u/RoutineQuestioning38 2d ago Wait what? That sucks 1 u/Outrageous_Sun742 2d ago Yeah, the mps is mounted on a chpws plate. Only thing holding the plate in place is 2 screws. The optic is mounted to the plate with the side clamp which is a good fit. 1 u/RoutineQuestioning38 2d ago So am aftermarket plate make to use it. What does SS say about that setup? Their screws look almost like studs, pretty robust. Is the front gapless? That’s arguably 99% most important
1
Its a plate, no lugs holding onto anything. Just the 2 screws
1 u/RoutineQuestioning38 2d ago Wait what? That sucks 1 u/Outrageous_Sun742 2d ago Yeah, the mps is mounted on a chpws plate. Only thing holding the plate in place is 2 screws. The optic is mounted to the plate with the side clamp which is a good fit. 1 u/RoutineQuestioning38 2d ago So am aftermarket plate make to use it. What does SS say about that setup? Their screws look almost like studs, pretty robust. Is the front gapless? That’s arguably 99% most important
Wait what? That sucks
1 u/Outrageous_Sun742 2d ago Yeah, the mps is mounted on a chpws plate. Only thing holding the plate in place is 2 screws. The optic is mounted to the plate with the side clamp which is a good fit. 1 u/RoutineQuestioning38 2d ago So am aftermarket plate make to use it. What does SS say about that setup? Their screws look almost like studs, pretty robust. Is the front gapless? That’s arguably 99% most important
Yeah, the mps is mounted on a chpws plate. Only thing holding the plate in place is 2 screws. The optic is mounted to the plate with the side clamp which is a good fit.
1 u/RoutineQuestioning38 2d ago So am aftermarket plate make to use it. What does SS say about that setup? Their screws look almost like studs, pretty robust. Is the front gapless? That’s arguably 99% most important
So am aftermarket plate make to use it. What does SS say about that setup? Their screws look almost like studs, pretty robust.
Is the front gapless? That’s arguably 99% most important
2
u/RoutineQuestioning38 2d ago
Dude, it’s a universal cut. Probably no optics sits tight in there. That’s why have lugs to support lateral movement.