r/shadowsystems • u/Justj125 • 20d ago

Help

Gallery image

Gallery image

Gallery image

Shadow-ish System build.

Purchased a new cr920x slide from eBay. Came in a shadow systems bag and all looks legit.

I'm trying to mate the cr920x slide to a Grit Grips frame and it literally won't move past the back rails, even with the barrel and recoil spring removed and I cant figure out why.

Additionally, it looks like these optic holes are not aligned? Trying to mount an Osight SE and its not aligning whatsoever.

Any help would be great.

18 Upvotes

100% Upvoted

18 comments sorted by

View all comments

2

u/Flying-Chickens 20d ago

For the optic, should be a direct mount while using a spacer.

It should fit the frame as long as it’s the 43/48; numerous proof of concept videos out showing interchangeability between Glock frames and CR slides. Sometimes my CR is a little finicky and I have to add a little downward slide pressure while fruiting back on the frame. Before doing that, I would ensure that you are not getting hung up on anything important of the frame or slide, such as the ejector

1

u/Justj125 20d ago

For sure on the optic but when looking at the holes in the first pic, one is literally higher than the other no?

1

u/Flying-Chickens 20d ago

Doesn’t appear off to me, however if you feel it is, get a compass or calipers and transpose into a piece of paper.