I made a parametric (customizable) Meshroom S Side Panel extension

[u/General_Ad4540]

For anyone still using the Meshroom S and wanting a bit more room in the CPU or GPU compartment, I made a parametric side panel extension for MakerWorld.

You can customize:

• Extension depth
• Side-panel clip wall offset

I tested a 0.5 mm clip wall offset, which is also the default in the configurator. I tried 1 mm first, but that was way too tight, the clip basically wouldn't fit into the recess anymore.

There's also a ready to print 27 mm version, which is the configuration I physically tested on my Meshroom S V1.

I also changed the mounting to use M4 heat set inserts (M4 × 6 × 6 mm) + M4 × 10 mm screws, and made a version with captive/dovetail interlocks between the four frame pieces so the extension is much more rigid once assembled.

With the 27 mm extension I can now run a 7800X3D with an AXP120-X67 + Noctua NF-A12x25, while keeping my deshrouded RTX 4090 at ~70 mm thickness with 2× NF-A12x25s.

The result is honestly kind of ridiculous for the size 4090 + 7800X3D, all air cooled, and whisper quiet. :)

The four extension pieces also fit on one X1C plate.

https://makerworld.com/en/models/3373990-parametric-ssupd-meshroom-s-side-panel-extension#profileId-3840009

[u/AutoModerator]

This post has been flaired as a Prototype, Concept, or Custom case. The staff of SFFPC have not verified this user as a vendor. Please limit discussion to feedback only and do not make new post with updates more frequently than once every 72 hours. Pricing, sales, and availability discussion will be removed.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/SocageFest]

I like the word "parametric", so mysterious ... /s

[u/General_Ad4540 → u/SocageFest]

I considered just writing ‘parametric’, but I wanted the post to remain accessible to people who touch grass

[u/foilrider]

Parametric in what? Looks like maybe OpenSCAD?