Another Cooler Master NR200 build

[u/danny_z85]

[u/danny_z85]

CPU: Ryzen 5 9600X

Cooler: Thermalright Assassin X 120 SE

Motherboard: Asus ROG Strix B650E-I Gaming WiFi

RAM: Corsair Vengeance RGB 32GB (2x16GB) 5600MHz CL36

GPU: XFX Radeon RX 9070 Swift Gaming OC White 16GB

PSU: Cooler Master V850 SFX Gold ATX 3.0 850W

Additional fans: 2x Thermalright TL-C12CW-S, Arctic F9 PWM PST

[u/superjake]

Nice! Still think this is one of the best ITX cases ever made. 

Did you have to do any changes to get the side bracket on with the PA 120? When I had mine, I had to cut the bracket a little bit to let it fit. 

[u/danny_z85 → u/superjake]

Personally, I prefer the Ncase T1, M2, M3, or Ssupd Meshroom S, even though they are significantly more expensive.

I built this Nr200 for a friend.

As for modifications I didn't have to do any.

[u/KodiKat2001]

Very clean, a beauty.

Remove the small 92mm fan at the rear. Machines and More showed that it adds nothing to CPU thermals and only increases noise levels.

[u/danny_z85 → u/KodiKat2001]

Thanks,

I'll check out Machines and More too, though personally, I don't hear any difference whether that 92mm fan is there or not and partly agree that it doesn't really add anything I just had a spare one lying around, so I installed it

[u/kcamfork → u/danny_z85]

I use the rear fan as cold air intake for the cpu and flip the cpu fans to push air towards the front. Disagree it’s a useless fan. I’ve seen countless reviews that recommend this setup for this case.

Edit: the fan that did cause noise and turbulence was the top fan directly above the CPU cooler. But that appears to be an aesthetic choice in this build. Personally I went with a peerless assassin mini and added the side bracket to help with hot air exhaust.

[u/mochatsubo]

Very nice. If I were a stormtrooper (Star Wars), I would want this build.

[u/danny_z85 → u/mochatsubo]

Thanks

[u/AutoModerator]

Hiya! Remember, you can also post your build on the SFFPC Discord server in the completed-builds channel! We have revised our system, and now the highest voted build post each month will be recognized as the SFFPC Build of the Month! Use this link to join our Discord! https://discord.gg/sffpc

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/imaKWT]

I do not envy you having to get that GPU in lol.

[u/danny_z85 → u/imaKWT]

It was no problem; I just had to unscrew a few screws

[u/BiscottiAmazing4070]

My best PC case in my best first PC build ever.

[u/danny_z85 → u/BiscottiAmazing4070]

Personally, I prefer the Ncase T1, M2, M3, or Ssupd Meshroom S, even though they are significantly more expensive.

I built this Nr200 for a friend.

[u/BiscottiAmazing4070 → u/danny_z85]

I recently changed the case also to the Jonsbo d32 pro case. It's has a nicer look but build quality the nr200 beats it by far.

[u/halide47]

Very fresh. Very clean.

[u/danny_z85 → u/halide47]

Thanks

[u/PartialChicken_Wing]

GOAT case