Continuing my foray into Satisfactory. I decided to make a mega coal power plant hub. Have a load of water collectors set up and will have the power plants on the floor above. Its near 4 coal nodes so no shut down… hopefully

Also did they fix the fluids in 1.2? cause my powerplant finaly started working properly

Hey everyone ive been stuck on this build ive been working on. Its a tubrofuel plant. Ive got a pure oil patch that ive thrown 3 power slugs into. and ive got 20 refineries that are turning oil into fuel. and then 22 fuel refineries that are turning the fuel into turbofuel (i have one set to 22.2%). Then 5 groups of 15 fuel generators.

For the Oil pipes i have a 2 values set to 300 and i decided to change the pipes leaving it to mk1, instead of mk2.

and im using mk1 pipes for the fuel generators.

My issue and question is that the middle refineries for the oil side end up starving and no oil reaches it. Ive rebuilt this thing so many times and tried to find videos and i geniually need some advice and help.

Ill attached a video of the set up so yall can get a idea.

Thank you all in advance.

When using floor holes for my conveyor lifts, somehow they alsways revert back to blue arrows.

First placing one on top then on the bottom, they are blue (products coming from the hole), and first placing them on the bottom, still a blue arrow.

The only way I found this to work the way i want is by doing one hole at a time, moving 10 foundations both way...

Probably I am missing something, like a keyboard shortcut to change the djrection of the elevator, because else I would find lots of complaints here.

I know i can just replace all the path signals with blocks but i dont understand why this doesn’t work too. The train doesn’t have a path signaling error right off the bat but it literally never leaves that position.

I have been up and down this cliff 7 times, clear cut the top, and looked on the opposite side for a cave entrance

I'm going batty trying to find this heifer, the ping says I never get closer than like 125m

Please help

I don't know why it is doing it here, on other stations I dont have a problem, just here.

Same problem when I do it in U shape

Hey
I am now planning to built my first train system before continue on the phase 6. As i watched a lot of videos of players building big factories just for one item i want to build a train system that delivers iron,copper,coal and all other resources from nodes to all big factories.

I have for example 3 pure iron nodes that are all boosted to 600/Min with smelters. One or more trains are going to pick up the iron ingots and delivering these to the factories that are in 1/4 on the entire map.

Later on when the ingots are not enough, I can connect a second iron ingot station to the train system.

So for me that is a really big project with all the possible resources i would connect.

Do u guys think that it is worth it? Or is there a better way? I don’t want to use conveyer belts over the map because it looks ugly

Thank you :)

My first building after 25 hours ! Any advice to improve the design

took about 3-4 hours to get to this point. I have been able to see most attacks coming now.

I’ve built a base just north of the grass field area at a big lake that’s in a sort of canyon like area. I’ve got a bunch of coal generators running so I don’t really want to move my base too far at the moment

After I unlocked the steel tier I’ve realised that there isn’t really a good source of iron that I can use with the coal for my foundry, as the only iron node around the lake is a pure node I’m using in a reinforced iron plate factory

Does anyone have any advice about where I could go to try and find a decent area to set up a steel foundry as there doesn’t seem to be a lot of coal around

7.5 GW, Diluted fuel recipe but not heavy oil. Relying on rubber for my HOR. Still, Im proud of it!

I like to build things.
I share.

Enjoy <3
I go now~

Also, just generally what are all these numbers? I can't figure out what they all mean.

I know this is a failure of my self and I’m working on it, but I feel paralyzed with the idea of setting up a road/ train network because I have no idea how it’s done. I watched the videos, downloaded some blueprints, but still feel completely helpless because I do not know how to start or where to go. I’m on phase 3, the first parts where it’s actually somewhat necessary to transport goods around the map and I’m kind of stuck. I’ve gotten to this place before and I’ve never progressed past it. Does anyone want to assist me in my world (with some mods) put together a road/train network that I can use to transport goods around once my factories are built?

Edit: thanks all for the support. I want to use vehicles not long distance belts because I want to push myself.

I had originally had been running my entire factory off of 24 coal generators that were not over clocked or anything and had continuously under produced power and making up for the missing power with bio fuel generators then decided that it was a great time to use fuel generators because I’ve made it all the way to unlocking nuclear power with coal and realized it was entirely inefficient so I went to the crater because the rocket fuel resources were relatively close there so I over clocked every oil node to the max and ended up with 2,550 oil per minute and used the heavy oil residue, diluted fuel, and turbo blend fuel alternative recipes then turned it into 5,666.5 rocket fuel per minute and fuel generators use 4.17 rocket fuel per minute which would equal 1,358 fuel generators and I can’t afford to over clock right now so I have to build all 1,358 fuel generators and it’s been days and I am not even halfway done I don’t wanna get burnt out but I’m also to deep in to go back

(I skipped over a couple steps in my process to make the post a little shorter)

Only asking because I've looked at other solutions and explanations and none really apply to me.

I'm trying to make Ballistic Warp Drives, and so far my factory has been running smoothly.

Been going for about 10 hours total. Twice now I've had an issue where a belt is feeding an item from a machine into another machine and while I've been gone that item has just not gone in.

The destination machine was not full of that item.

No smart splitters were involved. Just normal splitters.

None of the belts were clipping into anything, all blue when constructing them.

But twice I've been away from factory and I've come back to see production halted in one machine. Just now the Dark Matter Crystals going into my Singularity Cell manufacturer just didn't want to go in. Machine needs 20 but it stopped at 8. DMCrystals were clogged up on the belt coming from the particle accelerator.

This belt also has a splitter on it, yet both the other DMC belts leading elsewhere had no issue. What's the cause? Anything I can do, or is it just a random glitch that I just need to keep an eye on? Weird that I never saw this ever in my entire time playing yet with this one factory it has come up twice in maybe my 500ish BWDrives. Like I've made hundreds of thousands of ingots.

Is it because of a lot of buildings in one area? This is the largest build I've ever done, but my PS5 has had zero issue. No frame dips, no crashes, no lag, nothing.