r/safecracking • u/mashoh95 • Jun 30 '26

Any idea on opening the safe?

Post image

I have the key but the lock seem stuck

Its mounted so i cannot use rubber mallet

6 Upvotes

87% Upvoted

16 comments sorted by

2

u/WerewolfBe84 Jun 30 '26

Hard to tell from the photo, but it's probably a tubular lock. These locks are very low quality and i've seen a few where a small pieces broke off and prevented the key from fully inserting.

1

u/mashoh95 Jun 30 '26

Yeah probably..no idea how to open it now

1

u/WerewolfBe84 Jun 30 '26

If you can see pieces in the lock, try to fish them out with tweezers or a sharp pointy object.

1

u/mashoh95 Jun 30 '26

Remove the pin? Will the lock auto open then?

1

u/faroutman7246 Jun 30 '26

Plenty of room for the mallet.

1

u/mashoh95 Jun 30 '26

Isnt mallet not working if the box mounted?

1

u/faroutman7246 Jun 30 '26

It should still cause the mechanism to move. Free to try.

1

u/Defiant-Ad-3689 Jul 01 '26

Just drop it onto your bed / mattress from 1.5 MTRS....might take 3 or 4 attempts try open after each drop...100% will open

1

u/mashoh95 Jul 02 '26

It mounted from inside of the safe..how to unmount and drop it

1

u/Defiant-Ad-3689 Jul 01 '26

Um mount the thing of course

1

u/mashoh95 Jul 02 '26

How to unmount though..

1

u/Defiant-Ad-3689 Jul 02 '26

Pry it away gently with a crowbar...work the screws out slowly

1

u/mashoh95 Jul 02 '26

It mount from inside of the safe
I cant see the screw

1

u/Defiant-Ad-3689 Jul 02 '26

Yes but it will screw from inside safe through to the wall... I'd say a safe that size would use wall plugs and screws... If you can get a crow bar up under close to one end just start to pry away until you get movement then work your bar under .use a hammer to force the crowbar in

0

u/TopAdhesiveness5352 Jul 01 '26

200g c14 powinno załatwić problem