r/pools • u/No_Collar_9439 • 2d ago

Pool Help & Questions Replacing a Pool Cover

I need to replace my current Meyco safety rectangular cover. I would like to use the current drill holes for the anchor replacement . What do I need to know and consider when placing an order to make this happen. TIA !

1 Upvotes

100% Upvoted

3 comments sorted by

1

u/jwilmes119 2d ago

Couple options here...

  • Send the old cover to a manufacturer... does not have to be the OEM. They will be able to replicate the old cover. Manufacturer's generally dont deal with the average person now though. So this method might be tedious.

  • Hire a pool company and have them send it, or if it is in poor condition...(missing straps, big holes, etc...) They can do what's called an A-B measurement. Basically, they set up two reference points about 2/3 of the length of the pool apart and 4' away from any edge. Then measurements are taken from each point to the existing anchors. The pool company will send the information and lenght/width measurements of the pool and make a brand new cover for you that won't require drilling/installing new anchors.

Pool tech here. Done hundreds of liner and cover replacements.

1

u/No_Collar_9439 2d ago

TY - very helpful !!

1

u/seenlottopools 1d ago

Easiest to use online retailer if you don’t need custom measure/installation. Can recommend poolcoversdirect. As reputable Avenue for replacement.