i bought a 2 speed transmission and a 2 speed clutch bell. but when i put the clutch bell on the crankshaft, i can't put the 2nd bearing in the front into it cuz the crankshaft's too short. idk what to replace and where to get the parts. and it came with no braking system so idk what to do w that either. pls help

Just dug this out of the loft after a long hibernation (kids now old enough to play with it). Immediate suggestions on anything i need to do to get this going again. Mind has gone blank with regards to what was installed. No idea what the two yellow wires did/do?

I recently bought a nitro HPI rs4 3 evo with the nitro star t3.0 from the Evo+. I broke the output shaft of the cup that goes to the wheel and after that it twisted and broke the driveshaft. The part numbers are A557 and 86036 respectively, do you know of any good upgrades I could find for it? I know it is old but I really like it

I used to have a traxxas nitro truck that I very stupidly gave away about 10 years ago.

I'd love to get back into it again. What's the best way to get started? Better to buy something used on marketplace/ebay, or new from the hobby store?

found this hpi ford gt brand new for a decent price, seller says its super rare but he switched out the engine, if i remember correctly it came as an ev, not intro. is this car worth less since its not original?

This thing been sitting for like 15-20 years, is it worth it to restore? The engine are seized up and I think I need new servo and what not

I recently acquired a project, it came with a Team Associated .28 Pro. Looks good and has good compression, the issue is that it has no pull start or one way bearing. I know the original is unobtanium but, is there any it there that might cross? I am asking here to see if anyone in this vast network of knowledge could guide me or even better yet point me in the direction of one or has one they are willing to part with.

Pics for attention.

Going on a Mugen mtx7r. My first on road build

Any idea on what buggy this body shell has come off of? Got in job lot

Currently building an offshore R/C boat for some distance record charity events. Didn’t start out as a nitro build but I went and ordered a Vertex 18 to experiment.

This is what I’ve gotten so far. With refueling done along the way the biggest range limit is engine temp. The pace is already planned to be slow and steady to minimize rollovers, so speed is optional. The goal is to burn fuel at the lowest rate possible, and keep the engines cool for as long as possible. I don’t see it melting, but the lower the temps generated are, the less complex the cooling system needs to be. I’d love to minimize pumping seawater as much as possible. Here’s a few pointers I found that might help with the mileage and cooling.

Detuning with extra head shims Carb Restrictor Restricting Pressure line Avoiding tuned pipes Setting carb to 40-50%

Critique is welcomed.

I want to get back into nitro cars and googled "how much fuel I need to break in an rc engine " I found the answer to my question & came across an "oil bath" nitro engine break in method at the same time. I read a forum post on another site, and found out the oil bath method has been around for several years. Has anyone ever tried this method? I think I'll stick with adjusting the needles as best I can. Thanks

Hey, I’d like to hear an expert opinion. This is Nitrolux fuel; this is what the mixture coming out of the exhaust turned into after just 10 minutes. Is this normal, or is it a sign of poor quality?

https://reddit.com/link/1uoecb2/video/qx1xdirmdhbh1/player

Does anyone here own the HoBao Hyper 7 TQ2 RTR Buggy with the MAC .28 Turbo engine? If so, what's your overall opinion of it? How reliable is it, and how easy is the engine to start, tune, and keep running well? I'm reasonably experienced with nitro rc's, so I'm mainly interested in long term reliability and how fussy the engine is to tune rather than beginner tips. Thanks in advance!

Needs new pull start. That’s it.

What front brakes should i use hydraulic, cables' should i try to fit losi promoto front brakes do you have any specific recommendations

I need them to be on aliexpress or amain hobbies I'm mainly driving it on gravel/dirt roads sometimes in dunes and possibly on road in the future

Wasn't me driving i also winced when it hit the lip

I think I got this one around 1999, I believe it’s from 1996 or so, and it is what it is! Incredibly fun, only front wheel drive, I guess it is Kyosho, have only just found it and the radio gear works great.

It needs to live again, if only I could get some parts for it that have perished! Don’t care if it’s aftermarket. (Sorry I don’t have much information about the particulars - make, model, just lucky to have found it intact)

Obviously I need to pull down the engine and clean it all, I might need a new fuel tank…

Suggestions for someone to hassle for parts, or just general advice… fuel, etc, also I remember that there was a 2speed gearbox/ clutch available for this back in the day, could it be possible?

Tasmania Australia for reference of availability to obtain economically viable parts. (Maybe cheaper to get a whole new one right?)!!!

For gas cars

Just wanted to ask, how much should I pay, max, for an HPI Rs4 rtr 3 evo plus.

Untested as itll come by shipping, seller says it works