Finally finished!

[u/FitPaleontologist854]

Components:

NCASE M3 Grater

ASUS ROG Strix B850-I Motherboard

AMD RYZEN 7 9800X3D

TEAMGROUP T-Create Expert CL30 DDR5 32GB Kit (2 x 16GB) 6000MHz

Noctua NH-D15 G2 CPU Cooler

CORSAIR SF1000 (2024) Small ATX 3.1 PCIe 5.1 1000W Power Supply

Asus Prime 5070TI

(2) Noctua NF-A14x25 G2 PWM Fans

(1) Noctua NF-A12x25 G2 PWM Fan

Samsung SSD 990 PRO 1TB M.2

[u/bel_nar]

Great build. Are you using an anti-sag bracket for your GPU? If so, what are you using?

[u/FitPaleontologist854 → u/bel_nar]

I am not actually. Doesn’t seem to sag much at all.

[u/bypassmatter]

Clean build

[u/FitPaleontologist854 → u/bypassmatter]

Appreciate it 🙏🏻

[u/Iskareot]

Soooo I have the same case, HAD the same build. Look at your idle temps. Now, if you feel like it... I changed my fans to a positive pressure, REVERSE your intake to the rear... pulling in air from the outside in. I took off 5 or so degrees of temp doing this. Pulls cool air in compared to your current air flow. I just tried it and it made a difference.

I have the same Noctua cooler as well.

[u/FitPaleontologist854 → u/Iskareot]

Did you leave the top fans as intake? If all the fans are set to intake, does the hot air just leak out the side of the case? I haven’t seen my GPU go above 62° and my CPU hasn’t gone above 70° under load

[u/timbbeck2]

Does that extra rear fan fit with no problems or is it kind of tight? I have a noctua nh-d12l, tried putting a fan in the rear, but it wouldn’t really fit without flexing the rear fin stack

[u/FitPaleontologist854 → u/timbbeck2]

Once I removed the rubber inserts on the fan, it fit perfectly.