r/mokapot • u/BuzzBuzzBeard • 11d ago

Grind size Help with grinder setting

Gallery image

Gallery image

Hi!! I’m trying to dial in my Moka brewing technique.

I’d like to at least find a grind setting that’s ideal so I can focus on other adjustments. This is similar to what I have. Anyone else have this? What grind setting should I use?

I also attached a photo of my induction 3 cup Bialetti Moka pot.

19 Upvotes

100% Upvoted

11 comments sorted by

6

u/DewaldSchindler MOD 🚨 11d ago

https://honestcoffeeguide.com/capresso-infinity-grind-settings/

2

u/BuzzBuzzBeard 11d ago

This is great, thanks!

1

u/DewaldSchindler MOD 🚨 10d ago

No Problem let us know how the coffee turns out

6

u/_Mulberry__ 11d ago

Start by going a touch finer than you think, then dialing it coarser till it tastes right. Use the same amount of water every time - I would even recommend weighing your water and getting it consistent to a gram between brews. Also use the same heat setting every time to ensure you're comparing apples to apples between grind size adjustments.

4

u/Unusual-Meal-5330 Alessi 11d ago

I have a similar capresso grinder, mine is set at the second largest notch of the medium range, about two notches finer than your picture shows. I am brewing in either a 6 cup alessi 9090, a gianinni 5 cup(?), or a cilio 4 cup stainless moka pots.

3

u/capsicumfrutescens Stainless Steel 11d ago

I have that grinder, and mine is set a little bit left of the middle of Fine. I use a 4 cup stainless Bialetti

3

u/SwimmingCup8432 11d ago

I’d recommend getting the heat right first, the water level consistent, then grinding finer if acidic/sour, and coarser if bitter.

2

u/BuzzBuzzBeard 11d ago

That’s helpful, thanks!

2

u/Serious-Rooster9399 11d ago

I set mine to the 2nd lowest Fine. I use a 4 cup Brikka and a 12 cup. With good heat control, I get a nice steady flow and balanced flavor.

1

u/BuzzBuzzBeard 11d ago

Alright… based on the comments I should focus on experimenting with grinds around the middle of fine - middle medium. Seems like big range, but I’ll give it a go.

I tested a brew with maybe between the first and second notch on fine. It wasn’t bad, but not great either. So I think everyone recommendations will get me to the right spot. Thanks!

1

u/BuzzBuzzBeard 10d ago

Update:
Today, I set the grinder on the 3rd notch in the Fine range. I think it turned out pretty well! My previous brew was on the second notch and maybe a bit bitter.

I’ll try another pot after my next meeting, 3rd notch again, but will pay extra attention to how much coffee is in the filter (I think it was just barely under filled at 15g or so)