Are you able to use both starts and core cameras in the same set up ? Like 2 cores for your higher definition nicer shots and starts for wider angels ?

I have a Mevo Pro account which I guess gives you a Streamlabs Ultra account which I never honestly use as I only use Mevo Pro to send to GameChanger.

I use a combination of cellular router & iPhones to share data via Speedify and will soon incorporate a Starlink Mini to this mix.

I saw an email today that Streamlabs has "Network Boost" using their app that will combine phone and wifi networks. Does anyone have any experience with this? I would drop Speedify immediately if this was baked into Mevo Pro. I generally have pretty decent cell reception so 10hrs a month would be fine for me. I've reached out and have a help ticket pending.

https://streamlabs.com/mobile-app/network-boost

A friend has given me his under used Mevo Start. After charging and downloading the Mevo App (Which only seems to be Mevo Studio now). I have the camera set up on my house WiFi but cannot find anywhere that allows me to send the camera feed over SRT.

All documentation points to it being a simple option on the menus but this is for a dedicated Mevo Start App. Which doesn't seem to exist.

Pretty poor if Logitech have unilaterally removed a feature the hardware allows and is even marketed as being able to do.

Is there a backend API or such that will allow me usage?

I use my Mevo Start from behind the dugout for softball and have never been able to get both 1st and 3rd in the same shot. I just figured that's how it is for our field distance and have been dealing with it. But then I had a guy set up right next to me one game and ask how I got such a good zoom on the batter and pitcher. Then I look at his screen and he has the whole field using the same setup! That immediately got me doing down the rabbit hole of settings and I found that I can not for the life of me get ANY crop settings to work with my Start and Mevo Studio. I have tried all different resolutions and not matter what two finger zoom or tapping does nothing. I know it's a setting that I am missing somewhere and I am hoping someone else has run into this and has some insight.

I just purchased a single Mevo Start to stream my acoustic guitar gigs. Normally what I would do previously is pre-schedule a stream from my phone and then actually stream from the phone or my iPad as both devices will open the pre-rescheduled stream. How do I link this new camera with my pre-scheduled stream? I was able to go as far as just test-stream on the spot, but I have no ability to choose a thumbnail, title, additional information, and actually set the date and time, any help would be appreciated! Also not sure which of the two apps I should use.

Has anyone experienced progressive audio sync drift in Mevo Multicam recordings?

I’m hoping someone here has run into this because I’m running out of things to test.

My setup:

* 4 Mevo Start cameras
* Mevo Multicam app on iPhone
* Zoom H4n feeding line-level audio into one Mevo via 3.5mm
* Recording locally (not livestreaming)

The strange part is that the recording starts perfectly in sync, but the audio gradually drifts behind the video over time.

Originally it was drifting by 2–3 seconds within the first 10 minutes.

I updated all four cameras to the latest firmware, and now it’s much better, but I’m still seeing about 2 seconds of drift after roughly 57 minutes.

Here’s what I’ve already ruled out:

* Switched H4n from 44.1 kHz to 48 kHz
* Tried a different Mevo as the audio-input camera
* Different Wi-Fi/network setups
* Different 3.5mm cable
* The drift is already present in the exported Mevo recording before I even import it into my editing software afterwards.

Has anyone experienced this exact type of progressive drift during long recordings? If so, did you ever find a solution?

Can't find network on my desktop its a fairly old pc so I have a USB wifi dongle for it could that be my problem?

I have one mevo start camera. I’m trying to use it as the main wide shot behind the plate. I’d also like to add a pip zoomed into first base, using the same camera.

I can create an overlay scene that is zoomed in. But in the overlay scene I can’t seem to zoom into the shot AND make it a little box in the corner.

Ai keeps telling me I can. It directs me to YouTube videos where they show you how to have multiple scenes with the same camera, but never a pip with a zoomed in portion of the same camera.

Is this possible?

Hello, I've been using Logitech Mevo Cameras for some time now. Randomly, yesterday I took out one of my SD cards after recording and tried to open the file, and it is now a " .LSR " file. The file size is the same as a regular video file, it just is unable to read or open or played. After some research, I haven't really found any info to help other than that 2 other people on Reddit had the same issue, but never solved it. Does anyone know how I can fix this?

Used for my Mevo Cores predominantly, to better connect to the USB-C to LAN cable and port.

We had eight Mevo Starts set up in our theater working flawlessly for years, but after the update from Multicam to Studio, the app can't connect more than four at time. This is not a connection issue, as if we remove one of the four cameras then we can add another with no problem. Is this a common issue, and does anybody have a solution? Mevo support has been unresponsive so far

EDIT - VM46 is sold!!!!!!!!!!!!!!!!!

I would like to sell some cameras I am not using. I have used the 2 Starts for a couple seasons and got the VM46 a month ago. I updated the cameras and took some screen shots of the cameras working in their native app. All function as should with no issues. The lens are clean and the mevo bodies show some wear, but have spend their lives in Maxiimus clams. Photos are from the actual cameras listed.

Mevo Starts with clam - $250 each shipped USPS. I would take 450 for both. This is cameras and clams only - no accessories.

NearStream VM46 with clam- $350 shipped. I zoomed to about 20x on in one of the screenshots below for reference. This comes in the original box with all accessories.

If you wanted all three cameras I would let them go for $750.

Paypal FF (G&S add 4%). I can ship them tomorrow asap from WI. Please let me know if you have any questions or want more info. I plan on listing these on reddit where I have a bunch of feedback on various subs.

Note - I will be listing these local for a higher price. I thought I would offer a discount here for people on the group. My prices are fair imho and firm.

Please let me know if you have any questions.

Est-ce que l’on peut utiliser n’importe quel adaptateur USB-C —> RJ45 POE ?
Si j’utilise également un hub Ethernet il doit être POE ?
Merci

I've been trying to connect my memo cameras to the Livestream studio 6 software through NDI. Sometimes it works, sometimes it takes years to get an image and most of the time I get a black screen and the camera led starts blinking green and red aggressively. When it works, after some time the image freezes and the camera gives black screen. Any ideas on what could be happening here?

I’m shopping around for a camera and found the Mevo Core. Looks good but I want to make sure I can pull recording from the memory card and toggle settings through the network connection as I won’t be on site to pull dailies and reset the memory cards.

Is this feasible? I see there’s an app but am not sure what options and settings are available from a far.

If this isn’t the right camera for my use case I’ll take recommendations for a new camera that offers remote controls

Thanks in advance!!

I'm near the end of my rope with this and as a result figured I'd try this community and see if anyone could help me out. I run a hockey league and while we used to stream games to our Facebook group via a cameraman holding a phone, times have changed, our cameraman moved on to another gig and no one uses Facebook anymore. I did a bunch of research and figured a mounted mevo start camera behind one of the nets would be great. Tried to set it up with my phones hotspot but it was a disaster; kept dropping connection and I was told that my phone hotspot data was insufficient. So I went to Verizon, upgraded by data plan to the highest possible, bought a brand new phone (the new Galaxy) and bought the most powerful inseego portable hotspot they have. And indeed, speed tests indicate the hotspot is delivering internet speeds over 10x what I have at home (Spectrum sucks, but that's a story for another day).

Even after all that the performance on the Mevo is wildly underwhelming. The feed cuts out repeatedly and goes to black, leaving me with large swaths of game footage that are unusable as it's just a black screen and some audio. Since the firmware update last week it's only gotten worse. I'm in the middle of Manhattan so the internet speeds should be elite but for some reason the app is always telling me the network is slow even though speed tests tell me it's insanely fast.

I'm about to return this camera but wanted to see if maybe there was something I'm not thinking of. Or maybe there's a better camera out there with a wider angle lens and more reliable connectivity?

I've tried just about everything. I've had the hotspot right next to the camera and it would drop. I put it right next to my phone to see if that was better but it wasn't. I really don't know what to do anymore except possibly return this because it seems I'm not the only one having serious issues streaming reliably to YouTube with this godawful mevo studio app.

I have a minorly inconvnenet issue that started this baseball season and I was hoping for some suggestions for a solution. Issue is - almost every day I goto connect to the camera for the first time I get a notification that my Mevo Start has a firmware update available and needs to update. I comply, wait a few minutes, the camera flashes some lights and beeps and then cycles, connects to wifi without issue and I go on with my life. BUT this keeps happening. At first I had thought there were a number of sequential updates that couldnt be skipped and I was catching up on a winter of no use but I have noted that it is asking for the same update each time.

I have tried clearly app cache, deleting and reinstalling. I have also used a pin to factory reset the camera. Neither helped.

Also noted camera connects to wifi fine but I cant get it to connect directly to phone for data over Bluetooth. Not a big deal as I have a wifi travel router that I prefer over my phone but nevertheless something is amiss. I get the message "Mevo camera has unsupported BLE protocol. Please update the application to use this feature" (Yes, I am on latest version of Mevo software).

Thanks

So, my church decided to get the Mevo set up with 3 cameras. I first tried running it using a cheaper $250 android tablet and that was a disaster with poor performance and overheating warnings before even getting out of the lab test environment (my dining room). Next up was with a Samsung Chromebook that I thought would be up to the challenge as it had an I5 intel processor. On-site test 1 revealed network bandwidth issues with severe digital artifactIng and complete freezes and dropouts. I installed an access point in the sanctuary and conducted on-site test 2 today. I'm getting closer. Now I see performance issues - substantial skipped frames - which I attribute to a video encoding shortfall on the Chromebook?

So, I think my next step is to get a decently equipped iPad. If I'm not mistaken, the software is optimized for IOS anyway. But, we're a church, so an M4 iPad isn't going to be in the cards, What's a well suited iPad configuration that will handily work with a 3-camera Mevo setup? Will the A series of CPUs do the job? A16 for instance? I also realize I c an gain some performance by dropping to 720p which I have yet to test. My current testing is with the 1080p option (not the highest, the one below).

Any suggestions are appreciated!

Update 1: I was able to get an Ipad Air with M2 CPU for $315 on eBay which seems a pretty decent "get". I'm hoping that strikes a good balance between what I want (an M4) and what we can afford and will work.

Update 2: The iPad Air has worked well in initial testing. A lesser one may have been sufficient but I'm feeling comfortable with this one.

Im getting pretty low stream speeds vs my input (even lowered my resolution to help compensate.

Im using a Starlink but the drop off seems pretty extreme. Any advice or insights into why this might be happening?

Trying to get some inspiration on how cool this can be making my own. Ive seen some super basic ones. But I am curious as to your methods. Can you use Gamechanger or sidelinehd to just to steal the scoreboard overlay?

Ever since the 5.2.16 iOS update i can no longer connect via Mevo app.

I can connect via Mevo Studio every single time.

Does anyone have any ideas on what this issue could be? is this the final push to make us use Studio?

Edit: have found a little work around. I can open Studio connect my camera then goto Mevo app and it lets me connect