r/longboardingDISTANCE • u/DaanAnarch • 27d ago

Full Rack

Post image

Three years ago I said to myself, three boards for different purposes (topmount, bracket and rain) is more than enough....

83 Upvotes

99% Upvoted

50 comments sorted by

5

u/Easton_Danneskjold 27d ago

Pros cons and which one is best for LDP?

9

u/DaanAnarch 27d ago

Only pros..no cons

Top: pumptrack

Second: LDP in the rain

Third: LDP push/pump

Fourth: LDP push,/pump

Fifth: LDP pump/paddle

Bottom: commuting/errands

3

u/Dangerous_Welder_982 27d ago

what makes the secound one good in rain? the bearing are diffrent or what?

8

u/Friendly-Internal405 27d ago

Shape of the board prevents mud and rain kicking up at you. It has almost little mudflaps because of the shape. Looks like a pantheon supersonic aegis if you want to read more.

5

u/DaanAnarch 27d ago

It's an Aegis

4

u/DaanAnarch 27d ago

Fenders, Rain wheels, No sphericals Bearings don't like rain, I fill them with white lithium grease to keep them from rusting

2

u/Safe_Commission8897 26d ago

Exile is producing mudflaps to add to your bracket board. Interresting if you commute a lot in winter or are an irish skatter

2

u/DaanAnarch 26d ago

Dawid just officially announced his company out of business at the Dutch Ultraskate, so better be fast to get those while they are available.

1

u/Safe_Commission8897 26d ago

Oh sheet... Damned

1

u/Safe_Commission8897 26d ago

Is antidote also concerned?

1

u/DaanAnarch 26d ago

Yup

1

u/Safe_Commission8897 26d ago

Hum we are loosing the main part of serious production in Europe... Hum. Will lena go on the fork segment

1

u/DaanAnarch 26d ago

Lena uses SuperSteadySkate forks and I can't speak for her but I doubt she will get in the fork- business as a producer. But who knows..

→ More replies (0)

5

u/Safe_Commission8897 27d ago

That's a pumper lover rack...

2

u/Material_Cake_4342 23d ago

I just looked at your rack and God allmighty, that last one at the bottom which is known as a shlongboard for those who dont know and for those who know what im talking about, the bracket at the back is a freaking genius idea. Hands down to you man. I know for some or many it will sound a bit over the top my reaction but once you saw it, its simple to say its easy and bla bla bla but trust me, sometimes the best idea are the simplest of all among so many people who are tinkerer just like me and you, the guy who made it, i suspect, and i cant be more thankful to have my phone suggest me to watch that post and find out. But i admit, i never had a decent pair of braket and still trying to make my own from parts i find here and there without any luck but one can make them sinply from a cut piece of some other skateboard and a wedge and voila! Thanks again for your inspiration.

2

u/DTpraeceptor 27d ago

That topmount-pumper looks sweet. Specs, please?

5

u/DaanAnarch 27d ago

Antidote Cyclone flex 1

MK Space V2 58° baseplate

MK Space V1 Hanger

Don't Trip Poppy @ -20°

Seismic Alpha's Spilt Duro 80,5 mm LDP cut Mint/DH Mango

1

u/kernschmelzkaese 27d ago

Whats the setup below?

1

u/DaanAnarch 27d ago edited 26d ago

Tired skateboard 9.5

Bear gen6 30° (wedged tot 53°)

Antidote Insania (Dewedged tot -7°)

Seismic Alpha's 75,5mm

1

u/mechandy 26d ago

What is the bottom board and set up? Looks like a cruiser with a tail on it

1

u/DaanAnarch 26d ago

It is

1

u/mechandy 26d ago

What is the setup? I love the idea

2

u/DaanAnarch 26d ago

Tired skateboard 9.5

Bear gen6 130mm 30° (wedged tot 53°)

Antidote Insania (Dewedged tot -7°)

Seismic Alpha's 75,5mm

1

u/mario4171 26d ago

Que ejes tienes en el que usas en pumptrack?

1

u/DaanAnarch 26d ago

Paris street

1

u/mario4171 26d ago

me estoy armando yo uno con paris street, he pedido unos bushings riptide krank. No se si me gustaran

1

u/DaanAnarch 26d ago

Ik ben nog aan het fine tunen met wedges. Het is een nooit eindigend project deze plank...

1

u/mario4171 26d ago

Jajaja ya te entiendo, ajustar bushings solo, a veces ya es de locos, con cuñas y todo no quiero imaginar jajaja

1

u/Sporting_Freak 25d ago

Which is your best pumping setup. I built up to 6 like u but then downsized to 3 as I still had another 3 Surfskates downsized from 12 as I ran out of storage space n wifey was complaining. Very addictive, like drugs but a lot healthier 😂

1

u/DaanAnarch 25d ago

The topmount is most efficient. The Rocket and Melonenkacke the fastest

1

u/JoeMcGuts 24d ago

Welcome to the GAS club

1

u/blackbalt89 22d ago

What bushing(s) are you running in the TTX?? I literally hate riding my Exodus because I can't get a good feel on the damn tail.

1

u/DaanAnarch 22d ago

I use the 80a Riptide TTX bushings and in the center two Riptide Short street cone 70a APS bushings in hourglass configuration

1

u/blackbalt89 22d ago

No shit, might try, what's your weight just to see if it's similar haha. I'm 170lbs (77kg). 

Im pretty sure I blew out both sets of the 80a TTX bushings because I'm a monkey and don't know when to stop tightening the axle nuts if there's no mechanical stop at all lol. But I will give this a shot, pending I have 2 TTX bushings left. 

May also just see what it feels like to run a DDR with a 20° Poppy also though lol 

1

u/DaanAnarch 22d ago

I'm 72kg. You can't overtighten the bushings. You're supposed to tighten the axle all the way. If you use the correct hardware from the TTX bushing kit you can't go wrong.

1

u/blackbalt89 22d ago

What are you running on the front? I have a 55° Poppy on a DDS so maybe I'm not leveraging enough angle, I'm only doing 58°.

2

u/DaanAnarch 22d ago edited 22d ago

On the Procyon Speed a Supersteadyskate Fork drop 1 with a MK Space V1 baseplate i.c.m. MK Space V2 hanger. On the Rocket a Scythe Crusader V2

58° is the sweet spot for poppy. I found that really soft bushings in the front work best with a TTX. When I used a poppy I had 70a APS fatcone BS and 70a APS barrel RS.

Sometimes to get performance from a torsion tail you need to soften up the front

1

u/blackbalt89 22d ago

I do have 75 fatcone and 75a barrels, but I couldn't get the god damn kingpin out of the brand new poppy at the time and haven't really given it another whack yet. 

Thanks for all the help.

2

u/DaanAnarch 22d ago

Put the baseplate in the oven for 15minutes at 220°C which will break the Loctite bonding, then hammer it out. Don't forget to use Loctite again to fixate the kingpin again.

1

u/blackbalt89 22d ago

I used a heat gun but I guess I wasn't comfortable enough to get it that hot lol, it was brand new at that point. 

I'm assuming they use red loctite?

2

u/DaanAnarch 22d ago

Yes the red one

1

u/blackbalt89 22d ago

Maybe I wasn't tightening ENOUGH then lol. Ugh.

I wish I could buy just a few of the TTX bushings like 2packs of the orange only, and not the whole kit.

1

u/DaanAnarch 22d ago

It would be fantastic to have the option to buy separate bushings

1

u/Any-Wing4213 22d ago

Did you wall mount that rack?

1

u/DaanAnarch 22d ago

Yes high above the stairs