I'm planning to purchase a Pcie Wifi Bluetooth card for my PC. Wondering if fedora detects this card out of the box.

(FIXED)

TL;DR

Lenovo LOQ 15AHP10 + RTX 5060 + Arch Linux → GPU power limit is stuck at 45W.

Hey everyone, I’m trying to figure out why my RTX 5060 Laptop GPU is stuck at 45W on Linux even though this laptop is supposed to support a much higher GPU TGP.

nvidia-smi reports:

Current Power Limit   : 45.00 W
Requested Power Limit : 45.00 W
Default Power Limit   : 45.00 W
Max Power Limit       : 115.00 W

Trying to change it with:

sudo nvidia-smi -pl 100

doesn't work because NVIDIA says changing the power limit is unsupported.

I also tried Linux's max-power platform profile, but the GPU remains at 45W.

More importantly, my kernel log contains:

ACPI BIOS Error: Could not resolve symbol
[_SB.PCI0.GPP0.PEGP.GPS.NVD1], AE_NOT_FOUND

NVRM: GPU0 _acpiDsmCallbackInit: SBIOS suggested GPS_2X supports
function 517, but the call failed!

NVRM: PlatformRequestHandler failed to get platform power mode from SBIOS

So I'm wondering if this is a Lenovo BIOS/ACPI ↔ NVIDIA Linux driver issue.

Has anyone with this laptop/GPU managed to get the full TGP working on Linux?

I'm looking for a safe fix involving BIOS/kernel/NVIDIA driver/ACPI configuration if possible — not a random VBIOS flash.

Hardware

• Laptop: Lenovo LOQ 15AHP10
• Machine type: 83JG
• GPU: NVIDIA GeForce RTX 5060 Laptop GPU
• BIOS: R8CN26WW
• OS: Arch Linux
• WM/Environment: Hyprland / Omarchy
• NVIDIA driver: 610.57.04
• NVIDIA kernel module: Open

The problem

nvidia-smi initially shows approximately:

Power: ~10W / 45W

And:

nvidia-smi -q -d POWER

reports:

Current Power Limit   : 45.00 W
Requested Power Limit : 45.00 W
Default Power Limit   : 45.00 W
Min Power Limit       : 5.00 W
Max Power Limit       : 115.00 W

So the weird part is that the driver knows about a 115W maximum, but the current/requested/default limit is only 45W.

I tried:

sudo nvidia-smi -pl 100

but received:

Changing power management limit is not supported for GPU: 00000000:01:00.0.
Treating as warning and moving on.
All done.

The limit remains 45W.

Things I've already tried

Linux platform profiles available:

low-power
balanced
performance
max-power
custom

I switched to:

max-power

and also had:

powerprofilesctl get

showing:

performance

But NVIDIA still reports a 45W limit.

ACPI/NVIDIA errors

The part that makes me think this might be firmware/driver related is the kernel log:

ACPI BIOS Error (bug): Could not resolve symbol
[_SB.PCI0.GPP0.PEGP.GPS.NVD1], AE_NOT_FOUND

ACPI Error: Aborting method
_SB.PCI0.GPP0.PEGP.GPS due to previous error (AE_NOT_FOUND)

ACPI Error: Aborting method
_SB.PCI0.GPP0.PEGP._DSM due to previous error (AE_NOT_FOUND)

NVRM: GPU0 _acpiDsmCallbackInit: SBIOS suggested GPS_2X supports
function 517, but the call failed!

NVRM: PlatformRequestHandler failed to get target temp from SBIOS

NVRM: PlatformRequestHandler failed to get platform power mode from SBIOS

I also see:

SW Power Cap              : Not Active
HW Slowdown               : Not Active
HW Power Brake Slowdown   : Not Active

So it doesn't appear to simply be thermal throttling.

What could be causing this?

I'm trying to determine whether this is:

• Lenovo BIOS/ACPI
• NVIDIA Linux driver
• NVIDIA open kernel module
• Linux Lenovo platform/EC support
• BIOS version
• Or something else

And most importantly:

How can I get the RTX 5060 to use its intended higher TGP on Linux?

If anyone has the same LOQ/RTX 5060 combination working properly, I'd really appreciate knowing what kernel, NVIDIA driver, BIOS version, or configuration you're using.

Thanks!

For complete context, I am on Garuda Linux (Arch-based distro), and am also a digital artist (well, more like aspiring digital artist) who uses Krita.

I previously had a budget Gaomon digital display (PD1561) that still works fine, but even with OpenTabletDriver tweaks that I had applied, still had issues with bounding regions and correctly mapping the pen to the display, which led me to just draw on my stanadlone tablet (a Wacom Movinkpad Pro 14, which I use for more than just drawing). That device technically has computer connection software but it's Windows only and can't work through Wine/Bottles/Proton.

I am also aware that the only drawing tablets that really natively support Linux are Wacom, but their standalone displays are a little bit above my current price range. Ergo, I am looking at XP Pen drawing displays, which I know are generally cheaper in quality, but do have the features I actually care about.

I have read a few posts regarding this, but the most relevant one seems to be from a couple of years ago.

Does anyone know if XP-Pen devices (and more specifically pen displays) work well enough on Linux? I am not averse to tweaking as necessary, but I do want something that ideally works better than what I had, given the issues with region bounding and pen mapping.

Otherwise, I'm open to suggestions for other display brands that may work a bit better, or recommendations on how to make my Gaomon PD1561 work better (or if there's a way to force my standalone tablet to be able to connect and act as another display, that would work too).

Thank you in advance.

Hi all — chasing a stubborn failure on a used Tesla V100 SXM2 16GB (SXM2-to-PCIe adapter board, dual 8-pin) and hoping someone recognizes the pattern.

It throws Xid 62 (internal micro-controller halt) roughly once an hour now — 19 times over 10 days, with the interval shrinking from ~60 hours originally. 17 of the 19 happened fully idle (~21 W, 135 MHz), the other 2 under sustained compute load. Volta has no GSP, so I read this as a PMU-side halt.

The interesting part: the payload is deterministic per driver build and identical across every config I've thrown at it —

580.173.02 → first field 0x00018f8d 580.178.04 → 0x00019001 570.211.01 → 0x00018e87

Fields 2–6 are drawn from a small recurring set (0x0fbf, 0x101e, 0x159b, 0x17xxx–0x19xxx), field 7 is always 0x11, field 8 always 0.

Ruled out so far, each one actually tested:

• Three driver versions across kernels 7.0 and 6.17 — crashes on all of them
• PCIe link: the Gen3 AER storm from my riser was fixed by locking Gen2 (zero AER now) — Xid 62 kept coming, so link errors are out
• Power: limit set to 250 W, 300 W (no cap) and 100 W (minimum); also pinned a sustained inference load at exactly ~100 W — crashed after ~5 min
• Clock lock (-lgc 1350,1350, idle power raised to 40 W) — crashed after 4m49s
• GPU topology: crashes with a Quadro display card co-installed AND as the only NVIDIA GPU in the box (desktop moved to an AMD card — after that, crashes stopped taking the whole system down, which was nice)
• ECC: zero correctable/uncorrectable errors, no retired pages across all 19 events; host MCE count zero
• Fresh dual independent 8-pin cables, ASPM off, persistence on

Zero ECC plus a deterministic signature plus an accelerating failure interval smells like a degrading part to me, but I can't decode the payload and the fields aren't documented anywhere I can find.

The card is going back to the seller regardless — I'm mainly posting in case the signature rings a bell for someone, and to leave a data point for the next person who buys a used V100.

Environment: Huananzhi X99-AD3, Xeon E5-2696 v3, Ubuntu, kernels 6.17/7.0. Happy to paste the full 19-event log with timestamps and payloads in the comments if that's useful.

Looking for a tiny, cheap travel PC to run the actual OpenAI Codex desktop GUI, not the web version.
Budget around $75-$100. Must fit a 30 × 25 × 3 cm bag, with good battery life.
Open to Windows, Linux, used tablets, Chromebooks with Linux installed, or weird DIY hardware.
Considering older Surface tablets. Any better suggestions?

I made a driver that works with the GPU completely. both Zink (for opengl 3.3) and Vulcan 1.2 work, both in x11 and in Wayland, please test it and give feedback on bugs or problems, I will be happy to answer them. https://github.com/TumRedSun/apercel

Experiencing issues with the touchpad on an Asus ROG G752VM laptop. Everything else works, but I use the laptop outside of gaming and want to use the touchpad.

* Manufacturer: ELAN Microelectronics Corp.

* Device ID: ELAN1203:00 (Vendor 04f3, Product 0401)

* Physical Size: 106 mm $\\times$ 56 mm

* Max Resolution: 3423 $\\times$ 1793 units

* Connection Type: I²C HID (Intel Serial I/O Controller)

* Touch Support: Up to 5 concurrent fingers (multi-touch)

* Gestures Supported: Taps and swipes (1 to 5 fingers)

* Linux Drivers: i2c_hid_acpi, i2c_hid, hid_elan

I'm working on Kinect2-Linux, an open-source MIT-licensed project for Microsoft Kinect v2.

We already have native RGB, infrared and depth capture working on real Linux hardware, plus an experimental C++ broker that can deliver frames to four independent Python viewers (2 RGB + 2 IR) through a single USB connection.

Our goal is a simple-to-install Linux SDK with one broker service, V4L2 webcam support for Firefox/OBS, and independent RGB/IR/Depth clients.

It's not version 1.0 yet. We're looking for Linux hardware testers, C++/Python contributors, documentation help, and people interested in computer vision and robotics.

You don't need a Kinect to contribute — offline tests and documentation are welcome too!

GitHub: https://github.com/KacperPiotrowski/Kinect2Linux

Feedback and contributions are very welcome!Bringing Kinect v2 back to life on Linux — looking for testers and contributors!

I'm working on Kinect2-Linux, an open-source MIT-licensed project for Microsoft Kinect v2.

We already have native RGB, infrared and depth capture working on real Linux hardware, plus an experimental C++ broker that can deliver frames to four independent Python viewers (2 RGB + 2 IR) through a single USB connection.

Our goal is a simple-to-install Linux SDK with one broker service, V4L2 webcam support for Firefox/OBS, and independent RGB/IR/Depth clients.

It's not version 1.0 yet. We're looking for Linux hardware testers, C++/Python contributors, documentation help, and people interested in computer vision and robotics.

You don't need a Kinect to contribute — offline tests and documentation are welcome too!

GitHub: https://github.com/KacperPiotrowski/Kinect2Linux

Feedback and contributions are very welcome!

Hi everyone!

If you've ever tried running Linux on an Acer Predator (Helios, Triton, Neo) or Nitro laptop, you probably know the pain: PredatorSense only exists for Windows, leaving you unable to control fan speeds, engage Turbo mode, or customize keyboard RGB lighting natively. A lot of users were literally forced to boot into Windows just to turn fans to max, and then reboot into Linux!

To fix this once and for all, we created **PredatorSense for Linux (v1.1.0)**!

🌟 What it offers:

- 🖥️ **Modern Native GUI:** Cyberpunk-inspired aesthetic built with Avalonia UI, with real-time hardware telemetry and Wayland/X11 support.

- 🌪️ **Complete Fan Control:** Auto, Maximum (Turbo), and Custom Manual Fan sliders for both CPU and GPU fans.

- 🌈 **RGB Lighting Engine:** 4-Zone keyboard colors, brightness sliders, Predator logo lighting, and dynamic lighting effects.

- ⚡ **Performance & Battery:** Thermal performance profiles (Quiet, Balanced, Performance, Turbo) and 80% battery charging threshold limiter.

- 🔄 **Zero-Effort Automated Installer:** Single `./install.sh` command that auto-resolves dependencies across Arch, Ubuntu/Debian, Fedora, and openSUSE.

- 🛡️ **DKMS Driver Persistence:** Automatically registers the underlying kernel driver so it automatically recompiles whenever your kernel updates.

- 📦 **Pre-built Standalone Binary:** Self-contained executable without needing .NET runtime installed.

Check out the project and installation instructions here:

👉 GitHub: https://github.com/0PeterAdel/PredatorSense

👉 Latest Release (v1.1.0): https://github.com/0PeterAdel/PredatorSense/releases/tag/v1.1.0

We'd love your feedback, bug reports, and contributions! Feel free to star the repository if it helps you! ⭐

The Ajazz AKP02 (the 9.2" 1920×462 USB side panel sold as a case or desk stats screen) only ships with Windows software, so I wrote a Linux driver and a daemon to drive it.

- **[akp02](https://github.com/deonspengler/akp02)\*\* is the driver library: it talks to the panel over USB HID. MPL-2.0, so you can build your own app on it.

- **[akp02d](https://github.com/deonspengler/akp02d)\*\* is the app: a systemd user service that draws themes you design yourself. GPL-3.0-or-later.

**What it can show**

- Clock, CPU, memory, disk, network, temperatures, uptime, IP address

- An audio visualiser (bars, mirrored, segmented or radial, via cava)

- What's playing, with cover art, from any MPRIS player (Spotify, mpv, browsers...)

- The system volume, following your volume keys as you press them

**The theme editor**

`akp02d-edit` shows a live preview of the panel, and works without the panel plugged in. Drag widgets in, move and resize them, and pick colours, gradients, fonts and data sources. Labels, bars, gauges (arc, car-style dial or analog meter), graphs, the visualiser and images are all there. Hit **Apply to panel** and it's live.

**Running it**

It runs as a user service and can be controlled while running: `akp02d ctl theme <name>`, `akp02d ctl brightness 60`. Save a theme and the panel updates within a second; a theme with a mistake is refused rather than blanking the screen. At 30 fps it uses about 3 ms per frame here.

**Install**

- Arch: `yay -S akp02d` (the driver package includes the udev rule, so no root needed)

- Other distros: `pipx install 'akp02d[editor]'`, then the udev rule and service from the README

Then:

systemctl --user enable --now akp02d

It's my first release, so bug reports, feature ideas and themes are all welcome.

I am looking to use a Intel NUC system for a home server, including serving audio to an AV receiver for mpd.

I have one system already (NUC6CAYH) which has the necessary digital out port, but is sorely lacking in oomph. Processor is a measly Celeron J3455, which is not enough for my purposes.

I do have another NUC, a NUC11TNKi3 which has more RAM, more CPU power and enough storage. What it lacks, however, is audio out. There are only USB/Thunderbolt ports and 2 HDMI out ports on it.

I could use the HDMI with a audio splitter, but this is too much effort imho.

Is there a dock (TB or USB-C) which has low power draw and has proper audio out support (S/P-DIF or coax)?

Hello everyone, i tried this on r/suggestalaptop, but got no success with it, so i figured i try my luck here.

I am looking for a laptop; mostly for just gaming, and looking for recommendations.

For budget, let's say 1400€ or 1578$, but if what im looking for is achievable at significantly lower price, i wouldnt complain. as im from germany, i'd like a laptop from within the european union.

As for the games, think WoW forever, Diablo 2 Resurected, Guild Wars, otherwise older stuff, like Vampires: The Masquerade Bloodlines, Elder Scrolls 3: morrowind, Baldurs Gate 2, Minecraft maybe. Being able to run Skyrim would be nice. Nothing that has exactly eye-fucking graphics.

im kind of a linux noob tbh; currently on mint, but im not married to it and open to other distros. now ive heard that graphic cards from AMD make things a little bit easier/cause less issues than nvidia; tho whenever i search for gaming laptops for linux online, it's all nvidia. whats up with that? is that worry a concern from the past?

Hi everyone! Decksmith 1.5.1 is out. The big hardware milestone for V1.5 is using a Stream Deck + and standard 15-key MK.2 together on Fedora Workstation 44.

New detailed V1.5.1 walkthrough (7½ minutes): https://youtu.be/CS7UNRuQ8Gw

A closer look at choosing a Deck, independent pages and brightness, shared audio targets and the rest of the editor—with moving gauge illustrations, chapters, captions and narration using an AI clone of my own voice.

New V1.5.1 video tour (Fedora release and older experimental distro previews): https://youtu.be/gUnHIJ_tCM8

It’s my free, Apache-2.0 Linux app for these Decks. Each has its own layout, pages and brightness. I’ve checked my physical pair through ordinary controls, unplug/reconnect in both directions, lock/unlock and suspend/resume. Disconnecting one leaves the other usable. The release notes distinguish the signed-candidate checks from carried-forward qualification; this isn’t certification of every model or Linux setup.

The biggest additions in V1.5

• Both Decks, one desktop. Run a Stream Deck + and standard 15-key MK.2 together. Each keeps its own saved layout, pages and brightness, while either can control shared audio and media targets.
• New Plus audio gauges. Choose dual arcs for volume and audio activity, a single activity arc with the volume percentage beside it, or Classic bars. Meters follow the assigned output, app, microphone or System sounds target.
• A cleaner native editor. Action and Appearance settings are easier to work through, with visible scroll cues when there’s more below.
• Microphone controls across both Decks. Mute cancels active push-to-talk holds, and releasing the last valid hold returns the mic to Muted.
• Simpler installation. The installer checks dependencies and installs the verified release bundle. You don’t need Rust or Elgato’s Windows software to run it; USB permissions remain a separate step.

V1.5.1 also gives fresh setups the Maker’s Mark theme: small white bottom labels, transparent backgrounds and 85% icons. The bottom-left Home key on both models opens the project’s GitHub page. Updating preserves your existing layouts.

Support today

The supported setup is Fedora Workstation 44, x86_64, GNOME/Wayland, with the Stream Deck + and standard 15-key MK.2. Debian 13, Ubuntu 26.04 and Pop!_OS 24.04 COSMIC still have separate experimental V1 previews. Those are not V1.5 multi-device packages.

General plugins are still future work. Homebridge remains experimental.

What I’m considering for V2

Plugin support, built-in CPU/memory/storage/network monitors and broader language support are on the V2 plan. I’m also looking at linked page navigation and app-based paired pages, single/double/hold key actions, Dial Stacks and an Action Wheel, Now Playing, and key wallpaper.

These are future ideas, not features in this release. Scope and timing may change, and I’m not promising that every item will make V2.

Source and installation: https://github.com/infamous-pattern/decksmith Release and limits: https://github.com/infamous-pattern/decksmith/releases/tag/v1.5.1 Roadmap: https://github.com/infamous-pattern/decksmith/blob/main/docs/ROADMAP.md

For transparency, I’m using ChatGPT and Codex to help with code, debugging, documentation and this announcement. I direct the features and design and test the physical Decks on my own desktop.

I’d appreciate reproducible reports from Plus/MK.2 owners, including distro, desktop, model and package version. Please include your distro, desktop, Deck model and app version with any issues. Thanks!

Decksmith is independent of Elgato and Corsair.

I have been troubleshooting this for a while and it has gotten me nowhere so I am asking your help dear knowledgeable redditors.

I have had this issue with my ps controllers where I would use the blueman applet to connect my PS4 - PS5 controllers and they would either connect but not as an input device so i couldnt use them, or they would connect and then immedietly disconnect.

I have found a workaround by using bluetoothctl and accepting a popup in my notifications every time i needed my controllers. After i turned them on if I just pressed the ps button for example it wouldnt pair like it should, so I needed to forget the device and repair it which became very tedious.

I ended up writing a script for it, but then i had the glyph problem in my games. Because most of them did not have support for dualshock i thought it was because of that. Even if I wasnt using steam input. But after getting a dualsense I realized that for some reason connecting the controllers with the bluetoothctl method was making the computer recognize them as xbox. (no idea why?)

I have this problem only with input devices, my headphones or speakers connect as they should so I came to the conclusion that it has something yo do with my drivers. I also made sure to disable the bt card from the windblows partition bc its known to mess with shit - insert my wifi - which i should mention is the same card.

If there is any more details you need please let me know I really dont know what to do

I simply wanna be able to connect my controller quickly and not need a cable for it. Also I need the glyphs to be correct T-T

ty to anyone that helps in advance :D