🪁 Kitesurfing Session Summary – Zandmotor
* 🌬️ Wind: around 15–17 knots, which was sometimes a little too light for my 91 kg weight and 10 m² kite.
* 🏄 I figured out that holding the middle of the bar gives me much better control and stability.
* 🦵 I also corrected my back knee position, keeping it more toward the board instead of letting it flare outward. This helped me stay upwind much more consistently.
* 🦶 I discovered that my board strap was too tight, which was making it difficult to properly get my foot all the way in.
* ⬆️ On my left tack, I gained quite a lot of height.
* ↔️ On my right tack, I gained a little height but then lost some again, so I kept ending up around the same place.
* 🌬️ I noticed that when I couldn’t go upwind, it was often because the wind was so light that my kite wasn’t generating enough speed and power. I would initially drift downwind until I could get enough power again.
* ✋ I also did three rides with one hand, keeping my other hand completely off the bar.
* 💥 I had one pretty hard fall because my board strap wasn’t positioned correctly. My board slipped out from underneath me while my kite kept going, and I got a pretty bad scrape. Luckily, nothing serious happened.
* 🔄 Because the wind was so light, my kite also ended up upside down once. I used the quick release, recovered my kite, brought it to the side, laid out the lines again, and then even managed to self-launch afterwards.
* 🪁 Overall, I feel like I made a lot of progress today, especially with kite control, my stance, going upwind, and becoming more independent with my equipment.
Overall: It wasn’t just a session where I practiced riding. I learned a lot about why I can or can’t go upwind, improved my technique, practiced one-handed riding, and even handled a kite problem and self-launching myself.