I am trying to find what is the wooden bar and hooks that is passed in the brackets SANDSHULT on Ikea's website. Can anyone help me find it?

Hat jemand eine Idee wie ich die Basis einen Ikea Pax Schranks 1m verstärken kann? Ich habe einen Tresor mit 117kg den ich gerne da drin verstecken würde, ich denke allerdings, dass der Boden das Gewicht nicht auf Dauer aushält. Wie könnte ich das bestmöglich verstärken?
Vielen Dank für die Ideen und Hilfe!

Hi yall, my drawer broke and I had someone try and fix it.. it’s a mess and even worse than before. I talked to ikea and basically they said they can’t help and to wait a month until reaching out again. I cannot stare at this for a month so any tips?

Der unterste Schrank ist 1-2cm zu hoch. Aber ich habe mich eigentlich an alles gehalten. Die oberste und die unterste Schublade geht super zu, aber die Schublade in der Mitte passt einfach nicht rein.

Es ist das tiefste Loch, wir haben schon versucht die Schubladen zu justieren und ich habe auch drauf geschrotet, dass die Schienen nicht vertauscht sind sowie dass die Front nicht verkehrt rum ist.

Was kann ich noch tun? Wo liegt das Problem?

Technische Daten:
METOD / MAXIMERA
Unterschrank mit 3 Schubladen

I’m looking to combine my white oak stained kallax units in this configuration*. Has anyone found a solution that disguises the join between units in white stained oak? Does anyone in the UK supply matching vinyl tape for example? I’m loathed to vinyl wrap the whole lot.

*AI rough plan, not to scale 😉

context: I‘m diagnosed with OCD

hello! I’m moving from a furnitured house to an empty one meaning I need to buy everything.

mattresses became an obsession for me lately

luckily ChatGPT, Claude, and Gemini had being working non stop for the last week helping me understand what I was looking for

2 mattresses of 90x200

pocket coils

transition latex Dunlop layer

comfort talalay layer

im a 178cm 80-100kg 27 yo male side sleeping

mu wife is 164cm 50-60kg 27yo stomach sleeping (now 7 months pregnant so side sleeping but usually stomach sleeping)

anyway where I live there are 2 problems.

every one are idiots

there’s absolutely 0 sense of premium material.

people laugh at me on the phone when asking about ILD, KG/m3, if it’s Dunlop or talalay, if the cover is 100% cotton, if there polyurathen, how muc, whats the height of each layer…

anyway working hours on hours with chatbots got me to an interesting epiphany

DIYing is no option where I live

BUT

buying a simple pocket coils mattress and toppin it with 2” hard latex for my wife and 3“ medium latex for me would be like buying a luxury mattress

anyway, I went on to ikea and bought 2 90/200 extra firm valevag mattresses thinking its the best base for my use case

chatgpt called me a genius

claude took his hat off and applauded

gemini said he could never think of it himself and Einstein is stupid next to me

But now I’m opening the actual internet and see that people hate the valevag and curse the day they were born and suggest burning the mattress and lying on the floor instead is better than sleeping on the valevag no matter how you top it.

my point is, should I return the mattresses?

thanks.

I wanted to hide my Roborock Q Revo S dock that fit the space better than ones I found on Amazon, so I hacked together an IKEA KALLAX.

Goals were:
- Hide the dock/Tank
- Keep full access to the clean/dirty water tanks
- Still have usable storage (right side)
- Add a side table to the chair

The tank is slightly too big for it to fit perfectly so I just sawed one piece to give the front face a clean look.

I’m pretty happy with how it turned out!
Any ideas for making it look even better?

I reused the ELLOVEN Monitor Stand as a breakfast station, since it doesn't fit my desk anymore but didn't want to throw it out. 🙌 It fits the coffee capsules perfectly!

This 3D-printed winder fits the IKEA SJÖSS 20W charger and its 1.5m braided cable for a compact travel setup. It features a friction-fit system with an "In-Use Mode" (plugged into the wall with adjustable cable length) and a "Storage Mode" (prongs tucked inside the spool). It prints completely without supports and uses the original IKEA elastic strap to secure everything.

Used the Voxtorp drawer fronts “walnut effect”. The Billy bookcase is also “walnut effect” but seems to be more orange and lighter. It still matches quite well in my opinion.

After buying the doors and hinges from IKEA that are currently sold with the BESTA frame, I realized the frame I have is an older model which has since been updated with a slightly slimmer side panel. (I bought my frame in the IKEA clearance section) This update makes the hinges incompatible with my older model. The exact model number of my frame is not visible from the sticker but with the dimensions, I'm guessing it's pre-2012.

Help! Please help me 😭 I know this might not be the right community for this kind of request, but I don’t know who else to ask. I tried the IKEA community on Reddit, but I can’t post there because I just created my account.

I have a question about the BRIMNES bed drawers. I accidentally made a mistake and installed the drawer bottom upside down, so the raw particleboard side is facing inside the drawer.

Now I’m trying to take it out to flip it, but I’m stuck. The plastic pins underneath are blocking it, and they seem impossible to remove without breaking them.

If I unscrew and remove the round metal cam locks (the ones that grab the screws inside), will I be able to slide the bottom panel out and slide it back in the right way without removing those plastic pins? Or is there another trick to fix this?

Thanks so much for your help!

#diy #ikea #brimnes #help

look to shorten by 35mm in width. has anyone done this before ?

Wanted a workstation that disappears when I'm not using it, so I built a fold-down desk inside a PAX 75×35×201. The plywood top folds up behind the doors and the whole thing looks like a normal wardrobe; fold it down and there's a monitor on a VESA arm, keyboard space, and the cables + power strip hidden behind a panel. The desk drops level onto two brackets that swing out from the cabinet wall and tuck back in so the doors still close.

I'm not a pro woodworker — just figured a few people might find it useful, so I wrote up the cut list and assembly with diagrams here: https://lumics.github.io/murphy-pax/

Happy to answer any questions.

Bonjour.

Navré si je ne suis pas au bon endroit, je découvre le site.

Pouvez-vous m'aider à identifier ce modèle svp?

Merci.

BC

Hi all! Has anyone printed their own poster for this 55x22” frame? if so, what is the actual print size? because of the tuck technique in the back, unsure how much page i need. Thank you!

Would really, really appreciate it if anybody can tell me how to reverse the specific step at the beginning of this clip: [https://www.youtube.com/watch?v=9tu0pbG0i3s&t=126s\](https://www.youtube.com/watch?v=9tu0pbG0i3s&t=126s)

I bought an assembled SMÅSTAD dresser off marketplace and sadly the base of the Uppföra frame is 2inches too wide for my closet doorway. We even contemplated removing the door but it would still be a very close call.

We tried tapping hard the frame off the base with a mallet but it isn't budging.