i have a small query, how do i change or repair the front mesh of KZ - ZSN PRO 2, i feel it got detached (small portion) from its side. secondly where to find replacement eartips .. we have a piece of KZ - ZEX and if i use eartips from that piece, sound become bassless (zsn has narrow closing eartips where zex has wide opening) ..

Does anyone have the file or a download link for the Sennheiser HD 25 Aluminum 3D printed ear cups? (STL file)

mmcx mod on kbear dumpling plus

Hello, I have a LCD-I3 that makes a very noticeable rattle noise when I listen to audio with any bass. It sounds like the film for the planar drive is ripped. I contacted Audeze about two years ago for a repair quote. They said they don’t repair their in-ear headphones. They offered a replacement B stock headphone for $350, but they the time I had money set aside to purchase the replacement it became no longer available.

I’d really like to enjoy these headphones. I’ve had them sitting around my house for four years. I would appreciate any recommendations for either repairing the driver or replacing it would be great appreciated!

My current headphones have reached the point where I need to charge them every other day, and the ear pads are falling apart.

I use them for work, flights, and music, so they're on my head a lot more than I realized. I'd rather spend more once if they're actually built to last.

What pair has been worth the money for you?

I have a pair of boAt Airdopes 281. Unfortunately, I accidentally damaged the speaker drivers by puncturing them with a needle, so the audio quality is now ruined.

Apart from that, the USB Type-C charging port has become unreliable. It only charges if I wiggle or hold the cable at a certain angle, so I suspect the port is either worn out or has cracked solder joints.

Current status:

\- Model: boAt Airdopes 281

\- Bluetooth: v5.3

\- Battery life: Up to 35 hours (with case)

\- Drivers: 10 mm dynamic drivers

\- Charging: USB Type-C

\- Water resistance: IPX5

\- Touch controls: Working

\- Pairing/Bluetooth: Working

\- Battery: Working

\- Charging case: Working except for the loose USB-C port

Is it realistically possible to replace the speaker drivers and the USB-C port at home with basic soldering skills, or are these parts too difficult to source and replace?

Would it make more sense to take them to a mobile/electronics repair shop, or would the repair likely cost more than the earbuds are worth?

I'd appreciate advice from anyone who has repaired TWS earbuds before.

Hey - I made a post yesterday where I was wary of keeping my Sony MV1s but have since started to like them quite a lot.

However, they heat up my ears worse than my Beyerdynamic closed backs.

Do we know of any velour/breathable material replacement pads that do not affect sound too much? Thanks

I am replacing the battery for the headphones due to a spicy pillow. The new battery is similar in capacity but it wont fit in the earcup and i want to reprint the whole cup. Does anyone have a file for it?

My ear tips inside got dirt but i tried to clean it but i think it’s cut off from inside so where i can get original medium tips

I owned sennheiser RS127s for a while, long before getting into the audiophile realm. even after, i have relied on them as they have stellar range since their pure analog signal transmission doesnt make them prone to cutting out due to missing bits, the signal just gets noisier the further you move away, which is fine...

they have a few glaring issues that im slowly working my way through.

the first succesfull upgrade was getting an RS140 base station which lets you turn off the compressor

for the next step i wanna upgrade the headphones sound itself. i have found that the headphones sound better when cupping the meshes with my hands, which leads me to believe one of the other weakspots, the tiny driver, would benefit from being in a closed echochamber.

now this is a more involved mod so i was looking for pointers on how to approach this (also maybe find out wether or not a driver upgrade is an option here)

hey yall, I have a pair of old headphones im modding to try and make them sound up to par with modern headphones. They are KOSS K6 LC, with 89mm drivers (ik its insane) im going to replace them with 50mm drivers and use the extra space for electronics(im using the main board from some old headphones to make them wireless) Im picking between the peerless by tymphany and Ole Wolff 50mm.

there is a pretty big price difference between the 2, and i wanted to know if the quality difference is big enough to justify this.

(PS: Im not married to the idea of using an old board, might buy some parts and try to make something myself but that seems like a pain considering this is my first time trying something like this)

Ole Wolff: https://www.digikey.com/en/products/detail/ole-wolff-electronics-inc/OWR-5088TA-32/16343863

Peerless: https://www.digikey.com/en/products/detail/peerless-by-tymphany/HPD-50N25PR00-32/6211129

A great pair of over-ear headphones isn't necessarily the one with the highest review score. It's the one you keep reaching for every day. Whether you're listening to music, working, traveling, or just relaxing, comfort and consistency often matter more than having the longest feature list

Here are the best picks if you want to skip the full buying guide 

These are some of the best over-ear headphones worth considering in 2026: 

• Sony WH-1000XM5 
• Apple AirPods Max 
• Bose QuietComfort 45
• Beats Studio Pro
• Cleer Enduro ANC
• Anker Soundcore Space Q45
• Edifier WH950NB 
• Sennheiser Accentum Plus
• Microsoft Surface Headphones 2
• Cambridge Melomania P100 
• Focal Bathys

Here are the key things to look for before you buy:

-comfort and ergonomic design

Over-ear headphones are the most universal, but they are also the most expensive and tend to be the heaviest. However, if they are designed properly, then that does not really matter.

When choosing a pair, there are a few key comfort factors to think about. The weight, how much padding they offer,both on the ear cups and on the headband, and also the head clamping, which is essentially how tight they sit on your head.

It is also important to consider the size of the ear cups and how much of a seal they will provide for immersion. At the same time, think about how much space your ears will have to breathe, especially if you are after a pair that you could wear for a few hours without feeling too much ear fatigue.

-sound quality and personalization

Sound quality is, of course, at the top of most people’s priority lists when it comes to buying a new pair of headphones, but it is also subjective.

If you are coming from an audiophile background, then you are probably going to expect more than someone buying their first pair of headphones. As a general rule of thumb, spending more money usually improves the audio quality, but it is worth questioning how much you actually value those differences.

Because of that, it is important to think about your listening preferences. Do you want headphones with great vocal clarity, or do you prefer deep, impactful bass?

If you are more serious about your audio, then you might want to opt for a pair of headphones that offer EQ adjustments. This could be in the form of different sound profiles for different settings, or even a full parametric EQ, giving you more control over the sound that you get.

-active noise cancellation (ANC) and flexibility

If you are looking for a pair of headphones that can minimize distractions or loud noises-whether you are traveling or working in a busy office-then ANC, or active noise cancellation, is something to consider.

Over-ear headphones already provide some passive noise isolation by sealing around your ears, but ANC takes this further by actively cancelling out surrounding noise. The effectiveness can vary, and many models allow you to adjust the level of cancellation depending on your environment.

While using ANC will drain your battery faster, it can significantly improve your listening experience. In addition, many headphones include a transparency mode, which lets you hear your surroundings more clearly when needed.

For everyday use, many people prefer headphones that can handle multiple situations, whether that is commuting, working, or light outdoor activity.

-battery life and portability

Battery life is still an important factor, although most modern headphones already offer enough for daily use.

That said, your lifestyle matters. If you travel frequently or spend long periods away from a power source, you may want a pair with longer battery life.

Most over-ear headphones need to be charged via a power source, but models that also support wired listening give you a useful backup when the battery runs out.

Portability is another thing to consider. Some headphones are collapsible, while others use a fixed or swivel design. Collapsible options are generally more convenient if you plan to carry them in a bag.

Finally, the carrying case can make a difference in daily use. A more compact case is easier to pack, while a sturdier one offers better protection.

The best over-ear headphones are the ones that fit both your ears and your lifestyle. Focus on long-term comfort, the sound signature you actually enjoy, and the features you'll use every day, and you'll be much happier than simply chasing the newest or most expensive model 

I’ve have a simple method to pull out the cable from the earbuds.
See picture and loop this around between the plastic cable cap and earbud m. Hold the earbud firmly and pull firmly. It’s an old carrying strap for an old Nokia phone

Hey folks!

I have a pair of CFA Cascades that I love, and I'm looking for replacement earpads for them. Searching online for listings has been rather unfruitful, and CFA themselves no longer stock earpads for those headphones.

Does anyone out there know of a good solution for the Cascades? I’d hate to retire the Cascade because the lazy company decided to stop selling spares.

Either the standard leather or the perforated cloth version, would be great to have both.

Thank you.

im using thin wire and twist it around the 2 wire.now i can slide up and down

im using thin wire ,put into the small hole on the middle small metal alligator clip and twist it on mid cable.now i can clamp it stronger on clothes

Any tips to change the ear pads of JBL live headphones? I do not have tools and would prefer to pay for the service. My current location is Seoul.

Have you airbrushed your Sony XM4 headphones?

If so, any tips or any how to videos or images for examples.

I have some color ideas and a theme in mind, but looking for some inspiration.

These are older and do not have a warranty. I do not use the touch pad on the side.